help needed

Trying to pass a Dell Perc H330 Mini to a VM in PVE Version 7.3-3 and failing completely to do so. Error when trying to start the VM: kvm: -device vfio-pci,host=0000:01:00.0,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0: vfio 0000:01:00.0: failed to setup container for group 20: Failed to set...

Hello, I had a cluster, one of the servers disappeared. After that I cant run any of my vms. And inside of the cluster tab the cluster information is grayed out but it still shows that there are two nodes. When I look at the status of Corosync it says "Could not open /etc corosync/authkey: No...

What are all the permissions I need to grant a role if I want it to be able to see a vms console, see the summary, send commands in the console, and using a file editor like winscp have access to the vm?

Relatively new to Proxmox and have been scratching my head over this for the past day. When passing through my USB XLR Interface independently (tried by passing through the port and the specific device, and the entire controller) I get about a second (sometimes 2-3) of delay between speaking and...

Hi everyone Not long ago I finished a shell script to install PVE on debian with one click, only through the APT source, but when I wanted to adapt Ubuntu, I found that this way of installing PVE is not officially supported, is there a third party solution to install PVE on Ubuntu 20.04 or 22.04...

Hello so I had previously installed an Ubuntu server to run Plex and had it up and running but had to reinstall proxmox, I was able to reinstall and run a Truenas scale vm but when i tried to install a Ubuntu server vm it freezes on the installation when installing. I have never had this happen...

hello, I have a Proxmox server, where i had 2x2tb drives in raid 1, one of the drives failed, and i dont currently have a replacement Yet, as i had just gotten these drives and they both have less than 4,000 hours on them. my question is complicated, i have 2x1tb drives laying around, i still...

Hello, So I got a problem on my Proxmox where the time synchronization is wrong (using Chrony) the time has an offset of 8 Hours.. any idea how to fix that? above are the screenshot when i ran "chronyc tracking", i think the result should not be that way. i also try to add NTP servers to...

Hi, I start with the assumption that I'm really new here. I was trying the procedure on my laptop Dell xps15 9560, when I arrived to the screen "welcome to [...] Please use your web browser to configure this server - connect to: server name" I got stuck because I can't access to any browser, and...

Hey guys! I just bought a second hand HP Z400 for almost nothing a few days ago, trying to put a huge VM of kali in there, use it as a NAS and those general home server things. First, I used an HDD I had lying around (old 120GB Laptop HDD), which worked fine, but my VM is 80GB in .raw format...

I have a HP ProLiant ML350p Gen8 with a Smart Array P420i storage controller. I have 6 ST1000VN002 1TB Seagate Ironwolf drives in a RAID10. pve is installed to the RAID10 and then I am using the default local-LVM storage for the VMs. pveperf shows: root@pve:~# pveperf CPU BOGOMIPS...

eror 500: can't lock file '/var/log/pve/tasks/.active.lock' - got timeout) this error is always appears even i have restart the service, anyone can help me to fix it ?

Hello im new to proxmox and I've been trying to find a solution to this but I'm unable to so I thought I would ask here. I bought a dedicated server and installed proxmox on it I have tried with windows and Ubuntu being virtualized on the system and they both will not get Internet. Firewall is...

I know this is weird request and not the right thread. But please I tried rufus and many other instances and I cannot install windows or ubuntu over my proxmox server. Im out of proxmox since it is difficult for me and I just want a normal windows server 2016. I dont find any tips on how to do...

Hello I recently removed a disk to replace it but I did not know it was already configured, that was my bad I should have looked. I need help now getting out of emergency mode and getting proxmox to not worry about my other disk. Any suggestions? Update: Edited /etc/fstab and commented out the...

Hi, Bit of a long one... I picked up a Dell R530, from eBay, with the intention of giving it to my sons to experiment and run game servers etc. However, we’ve since looked into Proxmox, Xpenology, Nginx, Cloudflare, containers, Portainer... etc etc (you get the idea!) We've had a quick...

Hello i have gotten an issue after updating to the latest proxmox.. i cant update kernel as it says no space left on the device. apt-get remove pve-kernel-5.4.114-1-pve --purge Reading package lists... Done Building dependency tree... Done Reading state information... Done The following...

My Truenas core vm is crashing when I try to pass my HBA to it. Both Intel Virtualization Technology and VT-d is enabled in the bios. I've gone through all the whole of 10.9: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#qm_pci_passthrough root@BarryProxmox:~# pveversion -v proxmox-ve...

Hi guys! I recently installed proxmox on my system and i really like it, but i cant figure out how to fix the amd gpu reset bug. I Installed the vendor-reset dkms-module, and now i need a hook script because the kernel is later than 5.14 (github issue), but the script only exist for libvirtd...

I created a Proxmox server on an old computer and have a couple things running on it; Truenas, Plex, and now an Ubuntu 20.04 VM. I installed PostgreSQL on the Ubuntu VM and want to access the database from another machine on my local home network. How do I do that? I am pretty new to...