help needed

Grid K2 problems in proxmox Hello! I'm having a few problems with my Nvidia grid K2 cards, help and thoughts appreciated! (Also, this is my first Proxmox post, sorry if it isn't very well made) Background So I ordered 2x Nvidia Grid K2 from ebay, and I put them inside a proxmox machine. The...

Hello, I've installed latest version of proxmox, everything worked good, but after I made a reboot I can not access web GUI anymore. I dug up the entire forum but could not find a solution, I will be very grateful for any hints. 1. I did not make any change to the network. 2. I did not...

Preface: I am not a linux/unix guru, but I can figure things out and googlefoo for the most part... I've only added the components of my network that are valid for this post. Configuration: *Server 00 2x Xeon E5-2678V3, 256GB ram, Intel 540-T2 10 GbE, Intel I350 2x 1GbE and onboard 540-T2 GbE...

Hello guys, Newbie here. So I built this dual-seat workstation, and the VMs are set to auto start. I passed-through some devices to a VM, and it crashes the whole server. I tried to boot an Ubuntu live and mount the lvm, but there's no /qemu-server folder in /etc, so I can't edit the VM's...

I have a mobo with ipmi so the cable isn't the problem. the boot up screen shows the ip that i set at the installation. Ping from pve to router gives back "Destination Host Unreachable". mobo is an asus z10pa-d8 net interface in use is the onboard one router is from AVM a FritzBox 7490

Hello... i made a bad thing on one of our Proxmox servers in a cluster.. i accidentaly changed the ssh key file root@ram:/etc/ssh# ssh-keygen -t rsa -b 4096 -f ssh_host_rsa_key now it cant connect to the vms via console.. how do we fix that issue? or is it a reinstall that is req? :( EDIT...

So i finally made the jump to 10gbe in my proxmox hosts and my unraid server, but i have came up on a problem. I have the 10gbe links on a vlan so it is only used for traffic for the unraid server. I have everything stored on that server(Templates,VMs,etc). So i deleted the gigabit link to my...

What am I doing wrong? I have a dell poweredge t110 ii and I've installed proxmox 6 on it, I wanted to use my raid 0 for my VM storage, it shows up in the Disks menu but all of the sub-menus and VM tab show "no unused drives" so I'm stuck any help would be gratefully received thanks Oliver...

Hello everyone! I want to output via HDMI a VM that passthrough my igpu. For other machines I succesfully passthrough pice gpu but now that I'm doing it with igpus I just can't do it and I don't know what I'm doing it wrong so this is my last hope :v After follow a lot of guides I can't make...

So, I was following the directions to separate the cluster network, and things started to seem like they were going alright with the first node. However, when I rebooted the node, Datacenter view\Cluster says, missing ':' after key 'interface' (500). I then check the /etc/pve/corosync.conf file...

Hi all, I've run into a situation where my server (running 5.4-3) shutdown, and when booting again, had no network access at all (despite attempts to change IPs etc..) Thus, I've decided to call it quits and start again, on the latest 6.1 PVE version. I've thrown a USB stick into the machine...

Hello, I am stuck with PCIe Passthrough. I would appreciate every bit of help. My system setup is: CPU: 2x Intel Xeon E5-2680 MB: ASRock EP2C602-4L/D16 OS: PRoxmox VE 6.0 in UEFI As far as I know the Hardware supports PCIe Passthrough. I followed this guide...

Hello everyone. I am a bit new to the Proxmox community so please pardon me should I miss something regarding forum or community etiquette/decorum. A Proxmox Cluster setup I have been charged with supporting has developed a strange and unexplained issue that I have been unable to find a...

Hello Everybody, we are facing a strange behaviour of one proxmox server on version 6.0.7: The server randomly restarts / crashes. Until now we haven't found anything special in the log files. The crashes appear to be about 3-4 weeks apart from each other. Is there a way to investigate the...

Hallo zusammen, ich habe 3 Node Cluster mit je 3 OSD in jedem dieser Nodes. Meine Ceph Version ist: 14.2.1 (9257126ffb439de1652793b3e29f4c0b97a47b47) nautilus (stable). Der Pool hat Replica 3/2 mit 128pg. Sobald ich eine VM aus einem Backup, das auf einem NFS Share liegt, herstelle zeigt der...

Hi, I have server where I need to put Proxmox. I configurated RAID 1 using DELL SAS 6ir raid controller. When I start installer proxmox doesnt find RAID and exits. Why ? Thanks

Hi folks, just an awesome bloody hypervisor, cannot fathom what I was doing farting around with VB and banging my head unsuccessfully against ESXI! anyhoo, (edit* of course I tried googling/rtfm'ing the problem without success) Prox ve running on my home lab/experimental/educational rig...