help needed

Hello everyone, I'd like to start by saying that I'm new-ish to ProxMox and especially new to server hardware. I recently got my hands on a HPE ProLiant ML350 Gen9 tower server without storage. The specs of the server are 2x Intel(R) Xeon(R) CPU E5-2620 v4 CPUs, 32gb of ram (16gb per CPU), and a...

Hello, I'm trying to create a zfs zraid-2 with my 8 3TB SAS drives connected directly to my Supermicro X9DR3-LN4F+ Board. I get an Error: In sys log I see this: I can see the disks: but even if i try to init or wipe I get an error: Am I doing something wrong? on S.M.A.R.T. drives look ok...

Hey As this being my first ever post on any kind of forum asking for help, please excuse me. I am running an Ubuntu 20.04 container running only qbittorent inside it. I have another VM running OpenMediaVault with NFS service running which is mounted to the said container. The issue am facing is...

how do i remove with yellow circle ? i have changed my host name of pve in this file /etc/hosts and /etc/hostname and the i reboot the pve node the config was succeeded but it showing the old name of hostname pve,

Hey friendly folks, I did set up OpenVPN in a lxe container (ubuntu 21.10 template), so far everything is good: i followed the "OpenVPN in lxc" tutorial, did some port forwarding created a profile and connected everything worked out flawless, besides having only access to local servers such as...

Hi there, I'm a complete newbie to Proxmox and I'm not that technical either. Last month I installed Proxmox onto an old machine and also installed Kali Linux and Ubuntu onto it. I installed this via the GUI interface which I accessed using https://192.168.0.38:8006/. Since then I had an issue...

After a bit of research and liking what I see here, I've come around to going the Proxmox route to setup a home server (vs. UnRAID or a standalone Ubuntu server). This will be a single server for different things which I'd like to setup and play around with and see where it takes me - my own Git...

Hello we moved from an old mail relay system to Proxmox Mail Gateway Cluster setup and imported all of our smtp settings. is there a script to see if domain is pointing to its cluster and if not remove the domain from transport and domains file on the master node?

I have one warning and I do not know how to change a storage parameters. can someone help. WARN: storage 'local' - parameter 'maxfiles' is deprecated with PVE 7.x and will be removed in a future version, use 'prune-backups' instead.

On one of our Proxmox node (pve14) NIC card stopped working entirely. We purchased a new NIC card and I changed the configuration in "/etc/network/interfaces" to use a new rj45 port under the name enp7s0. (picture1.jpg). After server restart "ip a" command is showing that everything should be...

first post, i hope Ive included enough info system specs: HPE dl380p gen8 ibm m5110 (9207-8i) 120gb sata sdd 2x 4tb seagate sas hdd 3tb wd black sata hdd Goal: to pass the 2 sas hdd and 1 sata hdd through proxmox to a vm Results : sata hdd passes through, sas hdd not found Gui: sas device...

I've spent the past couple days stuck on this issue. Before I rebooted it there were some issue with the container not being able to write to the drive. But when I tried with the host I could read and write without issue. lxc-start -n 100 -F -lDEBUG -o lxc-100.log lxc-start: 100: conf.c...

Hello all, Hello everybody, I come to the forum because I have been completely lost since 3 days and I am afraid of having lost all my backups. As mentioned in the title of my post I decided to update finally my proxmox ( 5.2 ) I followed the documentation on the proxmox site...

I'm trying to add a second network to my proxmox host so I can host certain VMs on a separate network than my main network. Networks net1: 10.10.10.0/24 net2: 10.1.10.0/23 I've already tried following this post here: https://forum.proxmox.com/threads/configuring-multiple-networks.34337/ This...

Hello all, I'm really new to Proxmox and networking, and I just got this used laptop to teach myself Proxmox and its uses. I'm fairly certain that I installed it correctly as it brings me to the usual command line area where it tells you to connect to the web browser to configure this server. I...

Hii, I am trying to install docker on a LXC container with an ubuntu server template, the docker installation was successful but when trying to run a container I get this error. root@Docker:~# docker run hello-world docker: Error response from daemon: OCI runtime create failed...

I was just working on something and decided to attach an ssd to a free slot in my supermicro superserver machine where I am running Proxmox, while it was still on. After I rebooted, Proxmox does not come up anymore and I am greeted by a Grub rescue screen. I have tried to reboot several times...

Not sure if anyone has covered this, if they have, send me the link, however, trying to install proxmox on an inexpensive mini computer and it just ends at segmentation fault. It used to have windows, installed Debian and it loaded fine after I deleted some partitions etc. What causes the error...

I have recently secured my proxmox cluster with teleport. However since I did that, my gui hasn't been working properly. For example console windows will always display a 501 error or trying to modify any container or vm would display a connection error, with on perfectly working node (both can...

Hi there, Just installed proxmox, configured dhcp, but for some reason i cant access it with short host name (proxmox). Connecting via ip or fqdn (proxmox.*isp domain*) works fine. What am i doing wrong? My setup is router with inbuilt dns at 192.168.0.1, proxmox machine at 192.168.0.104...