help needed

  1. M

    Passthrough issues with nvidia + XP VM

    Hi there, Running into an issue with a build I am setting up, specifically passing through a GPU through to a XP VM being used offline, for retro gaming. The GPU does get recognized correctly inside the VM, but fails to start with an Error code 10. I've gone through the forum and tried several...
  2. P

    Trouble connecting proxmox to my network

    Hello all, I recently installed Proxmox 8 on a server that I recently acquired, and am having trouble getting proxmox to pickup a network connection. I've assigned it an ip address statically and am unable to ping it from my desktop, and cannot ping anything from the server. Below are the...
  3. H

    I know that I did something wrong and I am pulling my hair out trying to figure out what I did...

    Preface: Please know that before creating this post I did my absolute best to not bother you fine folks with this request, scoured the forums, tried some fixes….then tried all the fixes and I am still at the same spot as I started It should also be noted that I BARELY know what I am doing in...
  4. W

    web-gui not connecting from another vmbr

    I'm new to proxmox VE and I liked it, I'm new to using it. But can anyone help me? auto vmbr0 iface vmbr0 inet static address 10.12.52.125/24 bridge-ports eno1 bridge-stp off bridge-fd 0 bridge-vlan-aware yes bridge-vids 2-4094 auto vmbr1...
  5. H

    Give Proxmox access via one of its VMs

    Hello, i bought an x86 appliance that have 6 x 2.5 Gb NIC my plan is to virtualize OPNSense as Router and other services ( like HA ) I've installed proxmox and OPNSense with the current configuration NIC0 : Static ip ( used for access proxmox in case of failure ) -> 10.25.25.2 NIC1: OPNSense...
  6. L

    New build: storage optimization for variety of workloads

    Storage noob here. I am building a new single node proxmox server on a 2U server that has 9 3.5in 4TB HDDs and 6 2.5in 800GB SSDs beyond what is used for Proxmox's boot image. The server will be running a mix of stateful container workloads, databases for stateless containers, and VMs for...
  7. E

    Suggestions for Integrating Proxmox into an Out of Band Management Network

    Hi, I am looking to replace some ESXI hypervisors with Proxmox in light of the Broadcom acquisition, and I have to figure out how to make this work: I need to be able to access Proxmox from two separate networks, and both need to be able to say "Hey this traffic came in on this interface, send...
  8. A

    Network issues on VM's running Proxmox 8.0.3

    Hello! I have been trying to setup a server for a student radio at my school. This is my first time working with Proxmox. The reason I choose this software was becuse of the flexibility it creates but right now it's been more of a brick wall that I haven't been able to get past. The current...
  9. G

    I need help with the Network Configuration

    I’m trying to install Proxmox on a Beelink mini s12 Pro. I have a simple network with a FiberHome router from the internet provider, which is really bad and slow in the settings. I set up DHCP Static Leases (DHCP MAC Binding List because it’s the only thing remotely close to static IP in those...
  10. T

    [SOLVED] Issues after removing node from cluster

    I removed a node from a cluster. Barely used, nothing important on it. I am a bit stressed out and cannot remember, but I might have left the node on during the removal with pvecm delnode mini (it was called mini). After that command, I used expected 1 to change number of votes. Got that. I had...
  11. N

    ELI5 help for a noob

    About 2 years ago one of my friend helped me create a server to store some files and have some backup just in case. I haven't used it for quite some time, and just a few days ago I wanted to upload some files to it and the CT doesn't start for some reason. I tried to fix it but realized I...
  12. N

    Forming a 10Tb WD Ultrastar DC HC330 hard drive (part: 0B42266 and 0B42305) in Proxmox does not work, but ,in Windows10 formatting works.

    I can't format my hard drive in proxmox. It gives an error (file attached below). The latest current version of the proxmox update has been installed. But when running in Windows 10 through the disk management partition, formatting in ntfs format works correctly. Files on the disk run without...
  13. A

    Updated from proxmox 7 to 8 PCI errors ensue

    went from kernel 5.15 to 6.2 and now when ever my truenas vm tryed to load the nvme drive 0000:03:00.0 i now get vfio-pci and pcieport errors. the drive is on a pci bifurcation card. any help would be appreciated specs i5-11400 in a z490i aorus ultra 64gb ram the drive in question is an Intel...
  14. T

    CPU Governor Change from intel_cpufreq to intel_pstate

    Hello! I just setup a new Proxmox server. I am running a Supermicro X11DPH-T motherboard with dual Xeon Gold 6130 CPUs. It is installed via UEFI and uses systemd instead of GRUB. I am trying to see if it's possible to change the CPU governor from the intel_cpufreq to intel_pstate. I have read...
  15. S

    [Beginner Question] Best setup according to hardware and use cases

    Hi, I'm planning on creating a home server over the holidays to migrate away from a basic Synology NAS setup. I've gathered some old hardware from my personal PC and am a bit unsure how I should properly set up proxmox (and a NAS solution such as TrueNas) for my needs. It's very much a hobby...
  16. N

    [SOLVED] Almost full "pve-root"

    Hi guys One of my Proxmox nodes have the local partition almost full. But I can't find the files that are using all that space. I'm trying to avoid a clean reinstall. Need help urgently.
  17. P

    LXC bind mount permissions for user accounts

    I'm new to Proxmox and really just wanting to see how well it handles video encoding with an Intel Arc GPU. 2 LXC containers (plex and jellyfin) 1 VM running Debian Docker services installed New user created and added to the docker group Docker is running a samba container Bind mounts...
  18. F

    Grub error after Update to v3

    Hello everybody.. I urgently need your help. Today, I upgraded our Proxmox Backup Server from version 2.x to 3. Since then, it no longer boots, and I get the error message 'error: disk xx.x.x. not found.' The recovery guide for Proxmox doesn't seem to help me here. Does anyone have any...
  19. M

    PVE 7.4-17 Nvidia Drivers

    Hi all, I'm hoping someone can point me in the direction of what I'm doing wrong or how to download drivers for a nvidia a4000 for GPU passthrough. One passthrough is plenty for the minute, but long term would love to be able to pass through to multiple containers or VMs. Nonetheless, I'm...
  20. G

    [SOLVED] Unable to access internet on new host

    Greetings, I just installed proxmox on a second host today (pveh2), added it to a cluster, and tried to access the web on it but it's not working. I'm not sure if the fact that I added it to a cluster immediately after install proxmox is relevant. $ curl ifcfg.me curl: (6) Could not resolve...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!