help needed

Hello, i bought an x86 appliance that have 6 x 2.5 Gb NIC my plan is to virtualize OPNSense as Router and other services ( like HA ) I've installed proxmox and OPNSense with the current configuration NIC0 : Static ip ( used for access proxmox in case of failure ) -> 10.25.25.2 NIC1: OPNSense...

Storage noob here. I am building a new single node proxmox server on a 2U server that has 9 3.5in 4TB HDDs and 6 2.5in 800GB SSDs beyond what is used for Proxmox's boot image. The server will be running a mix of stateful container workloads, databases for stateless containers, and VMs for...

Hi, I am looking to replace some ESXI hypervisors with Proxmox in light of the Broadcom acquisition, and I have to figure out how to make this work: I need to be able to access Proxmox from two separate networks, and both need to be able to say "Hey this traffic came in on this interface, send...

Hello! I have been trying to setup a server for a student radio at my school. This is my first time working with Proxmox. The reason I choose this software was becuse of the flexibility it creates but right now it's been more of a brick wall that I haven't been able to get past. The current...

I’m trying to install Proxmox on a Beelink mini s12 Pro. I have a simple network with a FiberHome router from the internet provider, which is really bad and slow in the settings. I set up DHCP Static Leases (DHCP MAC Binding List because it’s the only thing remotely close to static IP in those...

I removed a node from a cluster. Barely used, nothing important on it. I am a bit stressed out and cannot remember, but I might have left the node on during the removal with pvecm delnode mini (it was called mini). After that command, I used expected 1 to change number of votes. Got that. I had...

About 2 years ago one of my friend helped me create a server to store some files and have some backup just in case. I haven't used it for quite some time, and just a few days ago I wanted to upload some files to it and the CT doesn't start for some reason. I tried to fix it but realized I...

I can't format my hard drive in proxmox. It gives an error (file attached below). The latest current version of the proxmox update has been installed. But when running in Windows 10 through the disk management partition, formatting in ntfs format works correctly. Files on the disk run without...

went from kernel 5.15 to 6.2 and now when ever my truenas vm tryed to load the nvme drive 0000:03:00.0 i now get vfio-pci and pcieport errors. the drive is on a pci bifurcation card. any help would be appreciated specs i5-11400 in a z490i aorus ultra 64gb ram the drive in question is an Intel...

Hello! I just setup a new Proxmox server. I am running a Supermicro X11DPH-T motherboard with dual Xeon Gold 6130 CPUs. It is installed via UEFI and uses systemd instead of GRUB. I am trying to see if it's possible to change the CPU governor from the intel_cpufreq to intel_pstate. I have read...

Hi, I'm planning on creating a home server over the holidays to migrate away from a basic Synology NAS setup. I've gathered some old hardware from my personal PC and am a bit unsure how I should properly set up proxmox (and a NAS solution such as TrueNas) for my needs. It's very much a hobby...

Hi guys One of my Proxmox nodes have the local partition almost full. But I can't find the files that are using all that space. I'm trying to avoid a clean reinstall. Need help urgently.

I'm new to Proxmox and really just wanting to see how well it handles video encoding with an Intel Arc GPU. 2 LXC containers (plex and jellyfin) 1 VM running Debian Docker services installed New user created and added to the docker group Docker is running a samba container Bind mounts...

Hello everybody.. I urgently need your help. Today, I upgraded our Proxmox Backup Server from version 2.x to 3. Since then, it no longer boots, and I get the error message 'error: disk xx.x.x. not found.' The recovery guide for Proxmox doesn't seem to help me here. Does anyone have any...

Hi all, I'm hoping someone can point me in the direction of what I'm doing wrong or how to download drivers for a nvidia a4000 for GPU passthrough. One passthrough is plenty for the minute, but long term would love to be able to pass through to multiple containers or VMs. Nonetheless, I'm...

Greetings, I just installed proxmox on a second host today (pveh2), added it to a cluster, and tried to access the web on it but it's not working. I'm not sure if the fact that I added it to a cluster immediately after install proxmox is relevant. $ curl ifcfg.me curl: (6) Could not resolve...

tldr: "zpool upgrade" failed and now I can't get to the data in my main ZFS pool. Despite my better judgement, I ran "zpool upgrade. "zpool status" kept giving me the same status that I needed to run "zpool upgrade" on my main ZFS pool. I did so, and immediately started getting some pretty...

Greetings! As far as I know disabling CSM should lead to installation in UEFI mode, yet I am still seeing GRUB during boot. What's weird, that efibootmgr -v reports that Proxmox were booted in UEFI mode. root@atlantis:~# efibootmgr -v BootCurrent: 000C Timeout: 1 seconds BootOrder: 000C,0001...

So i have been using Proxmox for a while and i did not need any of the features that access the internet (It couldn't access the internet since fresh installing it). But now I need a package from apt and it can resolve hostnames after setting the DNS server to my routers IP address, but when i...

Hello, I made a privilegied LXC for jellyfin. I'm "sharing" my iGPU with this LXC and everything is working fine except that /dev/dri/renderD128 is owned by root:kvm in my LXC instead of root:render. If i look at proxmox is see this : crw-rw---- 1 root video 226, 0 Oct 28 00:35 card0...