configuration help

Hey all, I played around with proxmox a bit and originally had my 6 disks which range from 1tb to 2tb to 10tb directly connected to the motherboards sata ports, and I was able to create vg's with said disks, in the gui it says " vgcreate sda /dev/sda error: Run `vgcreate --help' for more...

Just install my Proxmox server. My server has a dual Nic. Each nic port is connected to a VLAN switch port that serves two separate VLANs (port 2 for VLAN 10, port 3 for VLAN 100). The topology is below: Here is what is on the console on the GUI and in the /etc/network/interfaces I am...

Hi, Due to internet issues with my old node and being unable/frustrating to fix it, if reinstalled proxmox via usb. Now I was planning on recreating a vm but when I went to disks -> LVM I saw my disk was still almost full (as before the issues), its a external harddrive. My questions: - Is...

I have an old AMD Phenom x6 PC and figured I'd tinker around with it. My disks are as follows 3x1 TB (currently in zraid) 1x2TB 1x8TB ( newly acquired and shucked from a WD black) I don't need more than 5-6TB of storage atm. I'm thinking there is a way to mirror the 3 1TBs and the 2TB on the...

To my understanding, to send metrics data you need to follow these instructions : https://pve.proxmox.com/wiki/External_Metric_Server I have followed these on one of my machines : root@xxx.xxx.xxx:~# cat /etc/pve/status.cfg influxdb: xxxxxx server 172.30.x.xx port 8089 xxx are...

Hi everyone My hardware + software for work 0-24 all day as home server: CPU i7-4790K, 32GB RAM but if not needed all, I can use with only 16GB too. HDD: 2x 1TB HDD (Seagate Enterprise Capacity, ST1000NM0008) with software raid Latest Debian + software raid + latest Proxmox install, all works...

Guten Abend zusammen, ich arbeite zwar schon länger (Server läuft seit ca. 1 1/4 Jahren) mit Proxmox VE, aber ich bezeiche mich noch als Anfänger. Aktuell schreibe ich meine Backups der Container Montag und Freitag Nachts auf meine Synology DS218+, aber es kommt immer folgender Fehler. Ich bin...

Hello, I am stuck with PCIe Passthrough. I would appreciate every bit of help. My system setup is: CPU: 2x Intel Xeon E5-2680 MB: ASRock EP2C602-4L/D16 OS: PRoxmox VE 6.0 in UEFI As far as I know the Hardware supports PCIe Passthrough. I followed this guide...

Hi, I recently scored a good deal on two used Fujitsu TX100 S3p servers. I seem to remember Proxmox supporting the use of a quorum disk to replace the third required node in a cluster so I wanted to set these two servers up as a HA Proxmox cluster with external iSCSI storage. However the...

---------------------- Ingles ------------------------------- Good evening / afternoon I have a huge doubt, I am new with the pmg even though not with pve My question is the following: I have my mail server in debian 9 with postfix dovecot and roundcube is functional, but I want to filter the...

I recently got my hands on a Dell r720XD, installed proxmox on a SSD, and am getting started with an ubuntu and OpenMediaVault VM. OMV I plan to use as my primary NAS, along with docker and a few containers - everything seems to be working as expected. The issue I am having is now that I have...

Hello, I have been using a Proxmox for a while with a very simple network configuration, with only one NIC and one bridge that NAT the traffic to a private VLAN like this: (/etc/network/interfaces of the host) auto eno1 # internet facing interface iface eno1 inet static address...

Hi i'm a complete newbie in proxmox.I having trouble locating the config file of my virtual machines .I want to find this "/etc/qemu-server/<vm id>.conf" and configure it for sound.

Hi there, I installed my new hardware from Thomas-Krenn with PVE (v.5.2.1). Now after the installation has finished everything seems fine and the message to open the webinterface in the browser appears with the set up IP address. I am in the same network as the PVE-Server, but unfortunately I am...

Hello all together. I tried to change the helo-fqdn that the PMG sends to other mailservers on outgoing mails independently from the server hostname. The background is that this PMG server is an internal server with a private IP-address and only the incoming port 25 redirected to it from...

Obligatory: new to proxmox, and trying to understand networking. TL;DR: container needs to look like it has: IP = 12.34.56.778 /28 with VLANid=1000, gateway = 12.34.56.777 to the pfsense router for unfiltered internet access (plex server). Simplified setup: internet > pfsense > proxmox...