configuration help

Hi, I'm trying to follow this guide (https://www.nicksherlock.com/2022/10/installing-macos-13-ventura-on-proxmox/) without success. One of the first issue is related to the step "sudo apt install qemu-utils make". When I try I see this message: root@JARVIS:~# apt install qemu-utils make...

Hello All, As I have done other things in my professional carreer, I have missed some chunks of the IT, unfortunately also bigger chunks. Now working on my project I am in the middle of nowhere, exposing the ip of the management to internet. I am setting up one DL380 with Proxmox, 128 GB RAM...

Hi, let me describe my use case first. I have a remote physical server of around 20TB. I want to use it to host my web app which is currently in GKE. So I want to configure my physical server to host my web app, I'm planning to install a hypervisor (proxmox) on my server and host VMs. Doubts...

This is my first installation of the Proxmox Mail Gateway (PMG) and I am stuck at the very basic setup issue, even though I think I followed the instruction and the tutorial on how to configure PMG. I configured my internal Synology MailPlus server to relay to PMG on port 26 and it seems to be...

Hello everyone, I do have proxmox version 7.4.3 and pfsense latest version, virtualized. The hardware on which promox is installed has a lot of nics, but I can actually use only 2 nics, mainly for how my house and cabling is set up. So, I intend to use vlans on my pfsense lan to segment the...

Hi, I recently just completed building my home server and was trying to setup a TrueNAS VM. The only problem that I'm having is that the HDDs are not appearing within the TrueNAS installation setup. When I go back to proxmox I can see all three disks. I was wondering if there was a...

I have a VLAN (VLAN2) that I recently setup to separate all my hosts that are accessible from outside my network from the internal hosts. Everything was working fine until I made two changes (not sure which one broke the VLAN). The first change was upgrading my PVE-7.0-2 (or something close to...

Hello all I want to switch from ESXi to fully proxmox in my homelab. Currently, I have the following hardware: - Dell R240 with ESXi with 3 VMs (the only one that runs permanently as it also has our Smart Home stuff on it) - Dell R620 with Proxmox with 2 VMs - Dell R320 empty - Dell R520 empty...

Hello. A while ago, when i set up proxmox on my HP ProDesk 400 G4 Mini (https://support.hp.com/us-en/document/c06047054), i specified the HDSIZE on installation. I thought the 50 GBs from my 256 gb SSD would be enough and the rest of the space i would use for VMs. Now i'd like to resize the...

We installed ProxMox with the network card present on our server a dual port sfp card but need ehternet ports to continue. We therefore installed a network card with 4 ethernet ports after installing proxmox ve 7.2 The card is not automatically getting an ip and I dont remember if i should go...

Hello, I have rented a dedicated server. I have proxmox installed on it. Now I want to use pfSense as firewall and for internal routing of the other VMs. My goal is to: - An IPv4 for the host on which proxmox runs and is callable on the internet over it. - An IPv4 for the VM of pfSense, so...

Hello all, I am a bit new to ProxMox, though I do have experience with other hypervisors. I am a guitar player, and own most all of the suite of software I need to use on an OS that is less than friendly to get working correctly. Thanks to a recent HW death, I was hoping to virtualize said OS...

I've been running Proxmox about 2 years now and I'm always struggling with high IO issues. Due to conficting information online I've tried a ton of different settings and although it has been better then it was it's still not great. So I thought I would write this post and ask for some help...

Servus! Ich hab das Problem wenn ich Proxmox in Edge, FireFox oder Opera GX öffne immer den Fehler, undefined (Code: 1006) bekomme wenn ich die Shell öffnen will. Benutze ich jedoch Brave funktioniert es tadellos :eek: Jemand ne idee was das problem sein könnte? Als Antivirenprogramm benutze...

Hi, in a forum I found this link https://github.com/killmasta93/tutorials/wiki/PMG-Harden#geoip which shows the step by step of a configuration to supposedly harden the PMG functions, but I would like to know if anyone has used these configurations and if they have had good results.

Hi there, I'm a complete newbie to Proxmox and I'm not that technical either. Last month I installed Proxmox onto an old machine and also installed Kali Linux and Ubuntu onto it. I installed this via the GUI interface which I accessed using https://192.168.0.38:8006/. Since then I had an issue...

Hello everyone! I search the net and look for a "golden mean" with my equipment. The more I read, the more I get the feeling that I am dumber;) Configuration of my (homelab) Fujitsu Primergy TX120 S3p: CPU: Intel Xeon E3-1240 V2 @ 3.4GHz [4/8] RAM: 4 x 8GB SSD: 2 x 256GB, 2 x 512GB RAID...

Hi, I've configured Proxmox Mail Gateway to filter de incomming messages from a remote server but I don't know how to do the same from the outgoing messages. I hope that you can help me.

This is my first post on this forum. I have a strange problem with the USB2 device. When it is connected to an ARM Raspberry Pi 4B system it is working without problems. I have a DELL 7010 with an i5-3570S computer, when I'm connecting the device to this computer the DVB-S2 USB tuner is not...

I just installed proxmox as dualboot on my computer. I can access the local shell ping the internet and get a supposed adress to connect to on the local network for the GUI. When i try to connect to that webpage however, all my devices return: ERR_NETWORK_UNREACHABLE. Since i want to run the...