I have been playing around with proxmox and passing devices to vm's. For the
most part this has worked very well. Graphics card no problem, sata controller no problem, usb3 controller ok.
The worlds most simple usb device, the keyboard, big problem.
If I connect it to one of the...
Hi all, this is my first post here, and I hope it's OK that I'm posting a generic request for advice instead of posting a specific problem. I'm not a Proxmox user yet, but it does sound like a good solution for my purposes based on what I have read so far.
With AMD's Zen around the corner, I am...
Is it possible to boot a proxmox installation (installed on a usb stick) and run it in RAM (ramdisk, tmpfs, etc.) like VMware ESXi does?
I thought about something like:
load from usb
create fs in RAM
copy from usb to RAM
work on fs in RAM
write back all content to usb on shutdown...
I'm trying to install Proxmox VE on my IBM System x3650 with a USB stick. I've put Proxmox installer on the USB stick with dd.
When I boot the stick, the installer runs, I choose the default option, then a black screen appears, then a white screen with a mouse, then a black screen again...
so, i have an hp 8200 elite small form factor. i5's. 500gb hd. 16gb ram.
i was trying to virtualize os x 10.10 on it, then a friend of mine said that the hardware won't support a type 1 hypervisor. is this true?
so, then i went back to reinstall...
auf dieser Webseite wird erläutert, wie ein virtueller USB-Stick an eine VM angeschlossen werden kann.
Scheinbar funktioniert das Verfahren nur in Proxmox 3.x .
Weiß jemand, ob das Verfahren auch in Proxmox 4.x möglich ist?
I have an external USB DAC connected to my host and I want to hear the sound of all my guests over my hosts DAC.
Instead of passing through the whole DAC to a single guest I want to create something like virtual sound devices, which send the audio directly to my host where it gets mixed...
I installed ProxMox on my NUC5i7RYH all is working fine so far.
However, I am unable to add USB devices to virtual machines, they don't show up in the virtual machine at all.
What I have tried so far:
- Checked BIOS/UEFI settings and enabled virtualization technology.
Hello! Recently i have updated my PVE to 4.1 and now i'm trying to use LXC containers. I have 3 HASP keys which were forwarded to 3 different KVM VMs before i went to containers. How am i supposed to forward them to 3 different containers? I have found that i need to add lxc.cgroup.devices.allow...
I have passthrough working with my GPU. I've passed my usb keyboard and mouse through to the vm using usb#: host=xxxx:xxxx. There is no issue with them working in the vm. The issue is with the host.
When I start the vm from the host machine I lose all usb devices plugged into the host. Is there...