usb

Hello, I know there's a lot of these out there, and I swear I've read through the first page or two of google results. I've been trying to set up a kodi container for a day or two. Amusingly enough, the complicated parts all went without a hitch, but I can not get the container to recognize my...

Hello, I am trying to connect a USB speakerphone to my HASSIO running in a VM in my Promox 8.2.4. However, it could not be detected as it is not appearing in the dropdown of the hardware of the VM. It is also not detected in lsusb Does anybody know what could be missing here?

Amigos presento problema con una caja de discos Orico de 4 Discos, conectada a proxmox por USB la cual a su vez va conectada a una maquina virtual con openmediavault. Mi servidor proxmox presenta el siguiente log el cual me reinicia la conexión USB y la máquina virtual pierde la comunicación...

Long story, short: how can I boot from a USB key using the GRUB bootloader that Proxmox VE installs? (I'm running on an Apple Mac Mini) More detailed version: I installed Proxmox VE v8.1 on an old Apple Mac Mini a few months ago. I've since realised I don't need Proxmox, so I want to wipe the...

solo10gsfp+ was working fine until recent update. Output from dmesg [ 1424.374480] thunderbolt 0-2: new device found, vendor=0x8 device=0x36 [ 1424.374486] thunderbolt 0-2: Sonnet Technologies, Inc Solo 10G SFP+ Thunderbolt 3 Edition Output from journal -b -r pve kernel: thunderbolt...

...

Hi all. I'm currently using the backup mechanism of VE to backup my containers and vms to a NAS and to my Proxmox backup server. I was wondering if there is a (simple) way to also backup to a pool of USB connected drives. In detail this means, that I could have, let's say 5, USB drives and every...

https://github.com/raspberrypi/bookworm-feedback/issues/239#issuecomment-2162166863 See links off to red hat developers. I spoke to Startech not their error. They will try to assist on kernel fix. I later tried to report on Debian. Awful process for first time.

Hello, first time posting here after a few years of getting valuable information from this forum. After updating my old hardware (MSI 970A-G45) to PVE8.2 my Coral TPU stopped working. I've narrowed the problem down to USB2 not working from kernel 6.1.10-1-pve onwards [EDIT: 5.19.7-1-pve...

Hi guys I have been trying to install Proxmox VE 8.2 on my vintage Dell R810 using a bootable USB stick made with Rufus 4-4 off the official 8.2 ISO. I have checked the SHA256sum of my downloaded ISO and my ISO is binary exact and correct according to the site's posted SHA256 checksum after...

I have a question very similar to this one: Pass USB Device to LXC I have my externel disk enclosure that is plugged in USB on host: root@pve:~# lsusb Bus 004 Device 006: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge...

This is my first message - hello everyone. I have encountered a problem and I have no clue what caused it or how to prevent it happening. Let me describe the situation in details. Given: Dell 3020 box, 16GB RAM, 250GB SSD. Running Proxmox 8.1 without subscribtion. Under Proxmox is a single...

Hi, I have a monitor that has several built-in hubs (and a loudspeaker). I connect the monitor using a USB-B 3.0 cable to my Proxmox machine (latest version). I want to passthrough everything the monitor has to offer with regards to USB connectivity. This is the lsusb -tvv output of the...

Hello, for a few hours I am trying to passthrough my 3D Printer to my Octoprint Container. But I can't get it to work - the main Problem is that after adding this to my container config in Proxmox: lxc.cgroup2.devices.allow: c 189:* rwm lxc.mount.entry: /dev/bus/usb/002/008 dev/bus/usb/002/008...

Hi, I have several proxmox nodes that are working well. I am using a Wifi USB Stick to temorary passthrough to defined VMs for installing updates over the internet. This concept works also quite well for me. However, lately I took an old Fujitsu Siemens Machine, also with Proxmox to be used...

Hello, I have the project to create HA with 3 hypervisors Proxmox. I want to install CEPH to dot that thing. i also want to install some paquets on my VM. I don't have access to internet via a switch, and my hypervisors doesn't have internal wifi card. I want to create a router on a Zorin VM...

Hi, I'm trying to bind mount an exFAT 5 To Western Digital Essentials Drive which i previously use for my Mac and Windows PC so I have a lot of data on it. I just noticed that the new Western Digital HDDs are soldered to the USB port. What a hell ! Because i don't have a lot of money for the...

I'm new to proxmox and I've installed it onto a machine with only one drive for boot (small SSD) and then separate storage disks. I was wondering if there is an easy way to backup the current set-up to a USB disk so that it boots up proxmox exactly the same in case of boot disk failure?

I have a proxmox container running Fhem (to control my thermostat valves). U used this: https://tteck.github.io/Proxmox/ (Fhem) The container is Privileged and the connected usb device is found (to control the thermostats) When i type in this command, i get the following result: ls -l...

Just written down for your amusement, on a lazy, dark and rainy Sunday afternoon: Someone (me) might try to extend a Ceph cluster by adding NVMe (or other SSDs) via USB3 Adapters. For a small homelab this should be feasable, isn't it? My three PVE nodes already run a single Ceph OSD on an...