usb

  1. Emergency Mode - USB-HDD richtig einbinden?

    Hallo zusammen, nachdem mein PVE nach einem Neustart nicht mehr hochgefahren ist, habe ich den Monitor angeklemmt und gesehen, dass ich im "Emergency Modus" bin. Nach kurzer Recherche bin ich auf dieser italienischen Seite gelandet und habe mir den Text übersetzt...
  2. USB Device won't be mounted until VM restarts

    Hello everyone; I using the proxmox 7.0-11. I created a VM (Windows 10) on my proxmox, and everything works fine. But I have problems using USB devices on my VM. Every time that I connect a new USB device to my machine (Portable Storage, Flash Drive, Wireless NIC and etc...) It won't be mounted...
  3. jonasl

    [SOLVED] Slow performance on USB ports

    I'm having really poor performance when copying data from one physical USB-C disk to another physical USB-A disk plugged into the same Proxmox VE-system. The rsync below is only at 0.85kB/s. Filesystems are both ext4 and the disks are created as VM-disks: directories and raw. In the VM doing...
  4. [SOLVED] USB Pass through Failing in LXC Ubuntu 20.04

    Hi, I am running a Ubuntu 20.04 LXC on top of PVE 6.4 I am trying to access an HSM module USB from LXC. contents of lsusb: Bus 001 Device 016: ID 1050:0030 Yubico.com Using the lsusb details, I have trying mounting the below directory where My USB is mounted in the PVE Node...
  5. [SOLVED] Problem with USB HDD in read only mode at LXC after upgrade 5.x to 7.x

    I did in place upgrade from 5.x to 7 and after that my HDD on LXC bind as mp became suddenly read only. On host I can access mounted UBS drive and write to it as root. On LXCs (priviliged) mp setup did not changed from 5.x, they have no "extra" options added from my end but they suddenly...
  6. USB Passthrough to LXC Plex

    So I started recently with VE 7.0, created LXC and installed ubuntu + Plex. Idea is to use a USB drive connected to the machine to read media files through to Plex For USB passthrough I followed this guide here Then followed this guide to change cgroup What I cannot figure out, is when I go...
  7. USB sharing problems

    This is my first post on this forum. I have a strange problem with the USB2 device. When it is connected to an ARM Raspberry Pi 4B system it is working without problems. I have a DELL 7010 with an i5-3570S computer, when I'm connecting the device to this computer the DVB-S2 USB tuner is not...
  8. USB audio passthrough with no sound

    Just pass through USB device and Windows 10 guest os can see it but with no sound Another HDMI audio works well lspci output 02:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset USB 3.1 XHCI Controller (rev 01) (prog-if 30 [XHCI]) Subsystem: ASMedia...
  9. USB disconnects all the time

    Hi guys Recently I started using USB for the first time on my system, I want to use a zigbee USB stick which doesn't go well at all. The plan was to use a LXC for this but couldn't get it to work after a lot of trying I have discovered something strange. In the BIOS, I have disabled USB 3.0...
  10. USB reconnect in container won´t work

    Hello. i have a problems with USB devices in container. All devices works perfectly by passthrough to container. Udev rules are written e.g. /dev/1wire From time to time i must do a manually reconnect of a device. After reconnect the USB device is not responsible in container. Rebooting...
  11. How to assigning a flash memory to a live VM

    Hi, have a nice day How to assigning a flash memory to a live VM? I read this document USB Devices in Virtual Machines but it's need reboot the vm!! Is there no way not to reboot the VM?
  12. Host USB ports assigned to guest

    Hi all. I need to assign some USB ports to one of the guests. This is to allow unknown USB device to be "seen" by the guest when inserted in those specific ports. I am reading this guide but I am not sure to fully understand it. I would expect to only make some actions on the host. I cannot...
  13. Unexpected behaviour, USB device apperars in all LXC machines

    Hello, I am trying to redirect an USB Zwave stick to one of the LXC machines, but to my surprise as soon as I plug the USB device it is available through "lsusb" in all the LXC machines, even I do not need to restart all of them. If I run the "lsusb" command in each machine, I get the same...
  14. Backup on another Node

    Hi Guys, I have a few VMs running on my main server that I would like to back up. For this I got a second, weaker Intel NUC, on which I also installed Proxmox and connected an external USB hard drive for backups. This NUC should only serve as storage space a small NAS that I need for other...
  15. [SOLVED] USB Serial Device in LXC Container

    I am struggling to get a USB infrared serial device to work with an unprivileged LXC container running TurnKey GNU/Linux 16.1 (Debian 10/Buster). The device is an infrared serial converter - the only relevant info is propably that it uses an FT232 chip. lsusb Bus 001 Device 002: ID 0403:6001...
  16. Supermicro H11Dsi USB Ports not working with Proxmox

    Hello, my Server has following Hardware: 2x AMD EPYC 7301 Processor (2,20 GHz, 64 MB Cache, 16 Cores, 32 Threads) 64 GB DDR4-2666 RAM (4x DIMM 16 GB PC4-21300 ECC Reg.) SuperMicro H11DSi (on Board: VGA, 2x 1 Gbit-LAN (Intel i350-AM2), 1x M.2, 2x U.2, 10x S-ATA 6Gb/s; Remote Management (IPMI...
  17. Use Api-token for adding/removing usb devices

    Cause of corona our Developers are working at home, but as we need to work with limited number of embedded hardware devices we are currently preparing a "Remote Lab" infrastructure. We run a cluster with three nodes. One of them is used to run personal vms for developers, which should be easily...
  18. usb microphone on Windows server 2019 VM?

    Good morning, I am passing a microphone via usb to my Windows Server 2019 VM, I need it temporarily to make video calls until the pc arrives, only that the microphone sees it, but the audio does not pass, how do I solve?
  19. USB between VMs

    I'm looking into using virtual machines to test/develop against virtual android machines. One of the methods requires a USB connection between the Windows/Linux box running a tool called the Android Debug Bridge (adb) which connects via a USB connection. Is there a way to connect two virtual...
  20. DrillSgtErnst

    [SOLVED] changing USB Drives to same mountpoint

    HI, unfortunately I have found no matching Post in this Forum, if you may provide a link to a thread I will dig in it myself. Till then. I want to backup my Proxmox offsite via usb Disk. I have a G-Dock ev Solo (see also Manufacturer Description) Now I have 7 2TB HDD drives. Monday-Friday, one...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!