usb

Hallo, ich nutze jetzt zum ersten mal Proxmox und habe mir ein ZFS auf einem USB Stick angelegt. Anschließend habe ich ihm formatiert aber sehe immernoch unter Disks->ZFS das Laufwerk. Dort kann ich den Pool nicht löschen. Was kann ich dagegen machen?

Hey Folks, Long-ish thread, TLDR trying to pass through a USB audio device to an LXC container and am having a hard time with it. It might be a pulse audio issue but looking for advice. As to the inevitable WHY, well, because. Yes i know this is easier in a VM. I use nomachine to connect to it...

Hallo zusammen, nachdem mein PVE nach einem Neustart nicht mehr hochgefahren ist, habe ich den Monitor angeklemmt und gesehen, dass ich im "Emergency Modus" bin. Nach kurzer Recherche bin ich auf dieser italienischen Seite gelandet und habe mir den Text übersetzt...

Hello everyone; I using the proxmox 7.0-11. I created a VM (Windows 10) on my proxmox, and everything works fine. But I have problems using USB devices on my VM. Every time that I connect a new USB device to my machine (Portable Storage, Flash Drive, Wireless NIC and etc...) It won't be mounted...

I'm having really poor performance when copying data from one physical USB-C disk to another physical USB-A disk plugged into the same Proxmox VE-system. The rsync below is only at 0.85kB/s. Filesystems are both ext4 and the disks are created as VM-disks: directories and raw. In the VM doing...

Hi, I am running a Ubuntu 20.04 LXC on top of PVE 6.4 I am trying to access an HSM module USB from LXC. contents of lsusb: Bus 001 Device 016: ID 1050:0030 Yubico.com Using the lsusb details, I have trying mounting the below directory where My USB is mounted in the PVE Node...

I did in place upgrade from 5.x to 7 and after that my HDD on LXC bind as mp became suddenly read only. On host I can access mounted UBS drive and write to it as root. On LXCs (priviliged) mp setup did not changed from 5.x, they have no "extra" options added from my end but they suddenly...

So I started recently with VE 7.0, created LXC and installed ubuntu + Plex. Idea is to use a USB drive connected to the machine to read media files through to Plex For USB passthrough I followed this guide here Then followed this guide to change cgroup What I cannot figure out, is when I go...

This is my first post on this forum. I have a strange problem with the USB2 device. When it is connected to an ARM Raspberry Pi 4B system it is working without problems. I have a DELL 7010 with an i5-3570S computer, when I'm connecting the device to this computer the DVB-S2 USB tuner is not...

Just pass through USB device and Windows 10 guest os can see it but with no sound Another HDMI audio works well lspci output 02:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset USB 3.1 XHCI Controller (rev 01) (prog-if 30 [XHCI]) Subsystem: ASMedia...

Hi guys Recently I started using USB for the first time on my system, I want to use a zigbee USB stick which doesn't go well at all. The plan was to use a LXC for this but couldn't get it to work after a lot of trying I have discovered something strange. In the BIOS, I have disabled USB 3.0...

Hello. i have a problems with USB devices in container. All devices works perfectly by passthrough to container. Udev rules are written e.g. /dev/1wire From time to time i must do a manually reconnect of a device. After reconnect the USB device is not responsible in container. Rebooting...

Hi, have a nice day How to assigning a flash memory to a live VM? I read this document USB Devices in Virtual Machines but it's need reboot the vm!! Is there no way not to reboot the VM?

Hi all. I need to assign some USB ports to one of the guests. This is to allow unknown USB device to be "seen" by the guest when inserted in those specific ports. I am reading this guide but I am not sure to fully understand it. I would expect to only make some actions on the host. I cannot...

Hello, I am trying to redirect an USB Zwave stick to one of the LXC machines, but to my surprise as soon as I plug the USB device it is available through "lsusb" in all the LXC machines, even I do not need to restart all of them. If I run the "lsusb" command in each machine, I get the same...

Hi Guys, I have a few VMs running on my main server that I would like to back up. For this I got a second, weaker Intel NUC, on which I also installed Proxmox and connected an external USB hard drive for backups. This NUC should only serve as storage space a small NAS that I need for other...

I am struggling to get a USB infrared serial device to work with an unprivileged LXC container running TurnKey GNU/Linux 16.1 (Debian 10/Buster). The device is an infrared serial converter - the only relevant info is propably that it uses an FT232 chip. lsusb Bus 001 Device 002: ID 0403:6001...

Hello, my Server has following Hardware: 2x AMD EPYC 7301 Processor (2,20 GHz, 64 MB Cache, 16 Cores, 32 Threads) 64 GB DDR4-2666 RAM (4x DIMM 16 GB PC4-21300 ECC Reg.) SuperMicro H11DSi (on Board: VGA, 2x 1 Gbit-LAN (Intel i350-AM2), 1x M.2, 2x U.2, 10x S-ATA 6Gb/s; Remote Management (IPMI...

Cause of corona our Developers are working at home, but as we need to work with limited number of embedded hardware devices we are currently preparing a "Remote Lab" infrastructure. We run a cluster with three nodes. One of them is used to run personal vms for developers, which should be easily...

Good morning, I am passing a microphone via usb to my Windows Server 2019 VM, I need it temporarily to make video calls until the pc arrives, only that the microphone sees it, but the audio does not pass, how do I solve?