usb

Hello, Report: https://marc.info/?l=linux-usb&m=152086500118605&w=2 Proxmox VE 5.1 dmesg: [ 202.138960] usb 1-1.2: clear tt 1 (0050) error -71 [ 202.146341] usb 1-1.2-port4: cannot reset (err = -71) [...] Linux version 4.13.13-2-pve Regards, -- Cristian Aravena Romero (caravena)

Hi, I'm trying to get my feet wet with proxmox, but so far fail even with the very first step of installing it from an USB stick, using the lastest ISO available (proxmox-ve_5.1-3.iso). No matter what I do, the installation process ends pretty early, just after the kernel has been booted...

Maybe someone could answer this question? I have been testing with the USB passthrough in Proxmox 5.1-42. After a cold boot it's working most of the time but after some hours the VM, which the USB device has been virtually attached to, is not responding anymore. After a reboot of the VM the...

Hey all, i'v found this old article: https://www.tobias-baeumer.de/virtueller-usb-stick-fuer-eine-kvm-in-proxmox/ -but this doesnt work on my setup. It just generates some install errors, when i try to install tails on disk virtual device I try to setup a disk image and want the guest to think...

Hi all, I'm using PVE 5.1-36 and i get some issues with usb hotpluging. Is there a way to hotplug an USB key to a VM without shutdown/reboot? I know that i had to add some config files on the node to enable hotplug RAM and hotplug CPU. Is this the same for usb hotplug? I tried different ways...

Hi, I would like to use a hardware protected software. I have installed this software on a VM windows server 2008 R2. I have done : qm monitor 102 qm> info usbhost Bus 5, Addr 86, Port 2, Speed 12 Mb/s Class ff: USB device 04b9:8000, Sentinel Hardware Key then I have done : # qm...

Hello there, I'm currently trying to passthrough a wireless usb keyboard + mouse set from microsoft. This set works flawless in Ubuntu VM. With Windows 7 and Windows 10 the devices seem to unplug themselves after some time. I can for example try a windows installation and press the "any" key...

Hi all, we installed Proxmox 4.4 using ZFS RAID 1 and 2 x 1.5TB HD. Then we created 2 VMs, one of these (201 VM) has a 230GB virtual HD (Virtio) and 2 USB key (passtrough mode) that Proxmox see as unused disk 0 and 1. The 2 pendrive are used from a software, into the 201 VM, to ckeck the...

The general consensus seems to be that reading and writing onto a USB often would wear down the flash drive quickly. However, I believe ESXi loads the hypervisor into memory on boot. What is stopping Proxmox from implementing a similar setup?

Hi there I have used proxmox for many years but one thing i have found is that its incredibly difficult to install from USB. please can proxmox design a user friendly way to install? like UUI? Tonight I have tried every single way possible to install to a usb finally resorting to a blank dvd...

Dear, I'm trying to install proxmox on a HP Proliant 360G5. When I start the installation, I am able to press enter to choose " Install Proxmox VE". But when i need to accept the "GNU AFFERO GENERAL PUBLIC LICENSE", the keyboard (and the pc mouse) stops working. I have tried a couple things...

I have an HP Proliant Gen7 Microserver with 8GB of RAM. I'm trying to install Proxmox from a 8GB USB 2.0 flash drive plugged into the internal USB port. The first time I tried to install Proxmox on it, the installer worked perfectly, but I changed my mind halfway through the installation...

Hello all. I have been playing around with proxmox and passing devices to vm's. For the most part this has worked very well. Graphics card no problem, sata controller no problem, usb3 controller ok. The worlds most simple usb device, the keyboard, big problem. If I connect it to one of the...

Hi all, this is my first post here, and I hope it's OK that I'm posting a generic request for advice instead of posting a specific problem. I'm not a Proxmox user yet, but it does sound like a good solution for my purposes based on what I have read so far. With AMD's Zen around the corner, I am...

Hi there, Is it possible to boot a proxmox installation (installed on a usb stick) and run it in RAM (ramdisk, tmpfs, etc.) like VMware ESXi does? I thought about something like: load from usb create fs in RAM copy from usb to RAM work on fs in RAM write back all content to usb on shutdown...

Hello, I'm trying to install Proxmox VE on my IBM System x3650 with a USB stick. I've put Proxmox installer on the USB stick with dd. When I boot the stick, the installer runs, I choose the default option, then a black screen appears, then a white screen with a mouse, then a black screen again...

hello everybody! so, i have an hp 8200 elite small form factor. i5's. 500gb hd. 16gb ram. question one: i was trying to virtualize os x 10.10 on it, then a friend of mine said that the hardware won't support a type 1 hypervisor. is this true? question two: so, then i went back to reinstall...

Hallo, auf dieser Webseite wird erläutert, wie ein virtueller USB-Stick an eine VM angeschlossen werden kann. Scheinbar funktioniert das Verfahren nur in Proxmox 3.x . Weiß jemand, ob das Verfahren auch in Proxmox 4.x möglich ist?

Hi, I have an external USB DAC connected to my host and I want to hear the sound of all my guests over my hosts DAC. Instead of passing through the whole DAC to a single guest I want to create something like virtual sound devices, which send the audio directly to my host where it gets mixed...

Hi Guys, I installed ProxMox on my NUC5i7RYH all is working fine so far. However, I am unable to add USB devices to virtual machines, they don't show up in the virtual machine at all. What I have tried so far: - Checked BIOS/UEFI settings and enabled virtualization technology. Screenshot...