nic

Hi all, As the title states, I have a 2nd NIC on my HP ProLiant DL360p Gen8 server (The first NIC is a quad 1Gbps NIC). Upon getting my hands on the NIC, I installed Proxmox 7.1-7 and ran the following script I wrote: #!/bin/bash # Configure apt sources and install necessary packages...

Hi everyone, i've been facing a rather bizzare issue on PVE6.4-15 I have a small 2-node cluster and everytime i migrate a VM to the other node, it doesn't have network connectivity anymore. In order to solve the issue i have to remove the NICs and re-add them. Afterwards i have to modify...

Hallo Leute, ich freu mich hier sein zu dürfen und habe, wer hätts gedacht, auch gleich ein erstes Anliegen in Petto. Ich bin absoluter Proxmox Neuling und beiße mir gerade noch übelst die Zähne daran aus. In der Hoffnung Ihr könntet vielleicht helfen habe ich mich angemeldet und erzähle...

Good morning, while expanding monitoring of my PVE systems I am stumbling over a (for me) problematic detail: the reported speed of a virtual NIC is always "10", which means 10 MBit/s. Specifically the host tells me this for any VM: root@pm1:~# cat /sys/class/net/tap110i0/speed 10 Just for...

Hey all - I found this thread: https://forum.proxmox.com/threads/intel-pro-1000-pt-quad-network-controller-not-working.94302/ which is basically exactly my problem. I'm working (home, lab, funsies...) with an Avanti (Value-Added Retailer/custom server assembler) 2U server, Asus z10pr-d16...

Greetings friends, im here for some help with my ProxmoxVe installation. I had my server DL360E G8, and this had a 4 NIC (1gb each) and i installed another PCI with 2x1GB. Im trying to get more bandwith with LACP. so my configuration is here I already installed iperf to check bandwith...

Abend zusammen, Wie „sicher“ ist eigentlich PCI-Passthrough? Ich bin aktuell am überlegen folgende Konstellation zu bauen: 1 Host mit einer zusätzlichen Netzwerkkarte. Die Karte hat 2x 10G. Die beiden Ports sollen per PCI-Passthrough an eine Virtuelle OPNsense weiter gereicht werden. Hinter...

Hi there, m wondering if anyone have tried swapping NIC's on a running proxmox datacenter host machine ? if so do you then know if it's possible to "just change the names" in /etc/networking/interfaces? and then restart the network service? This is on a running environment and people depend...

Hi, I have installed a Turnkey-fileserver (LXC) to create SMB/CIFS and NFS-shares with low resources and fast disk I/O instead of having to create a VM (also because I've read it's a bad idea to install those things directly on the host). The problem is that after a few days, I usually cannot...

I attached a Plugable 2.5Gbe USB adapter to my Proxmox install, my goal is to assign it to VMs and get the higher throughput and also to use it for backups/restores to my NAS. They are attached to a 2.5Gbe switch. I can't seem to get the drivers working on Ubuntu, I installed the Realtek 2.5Gbe...

Hi, I'm having trouble making two subnets use the same NIC and being able to pass to the cluster nodes scenery: - 1 node with two NICs (one exclusively for public IPs - untagged; and another for private ips - tagged) - 5 node with one NIC (tagged) ** I don't have direct access to the switch...

Hello, I have rented a dedicated server. I have proxmox installed on it. Now I want to use pfSense as firewall and for internal routing of the other VMs. My goal is to: - An IPv4 for the host on which proxmox runs and is callable on the internet over it. - An IPv4 for the VM of pfSense, so...

Hello, I have 3 servers pve1 running a Xeon 2670v3 X99(C612) platform and a realtek nic lspci 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller and 2 more (pve2 and pve3) running a pentium just for ceph nodes However the...

Hey all, I'm the proud owner of a B550 F Strix Gaming board with a faulty I225-V Intel chip. I've purchased a PCI Intel 82574L Gigabit card and installed it into a PCI slot on the board as to make the faulty onboard chip redundant. It's worth noting that I'm very newish to all this so I...

Hi, I have two Internet with different ISP. First is connected through a router and another one is plugged in directly. Since I cannot use vmbr1 with another gateway, network is unreachable with any VM I assign it with. Q1. How do I set up up the network in my node to have access to the...

We have proxmox ve version 7.1 installed in a 3 node cluster... We have now very slow network and transfer speeds. 50MB/s on a 1GB connectiion. We have 3 node cluster, on the test node the config as follow. All the servers are version 7.1... all updates installed. 2 NIC, linux bond...

Hello, ProxMox community, The problem I have recently purchased a Converged Network Adapter (NIC) Intel 82576, and I am having problems setting this up. When I start up Proxmox, the computer isn't connecting to the internet. When I am in the BIOS, the NIC lights up as it's receiving data but...

Hi all iv been learning as I go iv managed to get multiple vms running including load balancing all just for the sake of learning but iv finally hit a wall im a little scared to chance. If got my pfsense iso ready to go and im ready to pass through a Nic for the Wan but im scared if I pass the...

Dear All, I have recently bought 6 Dell R820. On all I have installed Proxmox. On 4 of these, when the NIC cards (2) are connected the servers cannot start. Following the initial server bootup, and the message "Starting Grub" a text screen (I have never seen it before) which says: An error...

Hi! I am using Proxmox for some time now, but still a noob trying to learn the basics. But now i am at a point where i can not proceed without help, and it concerns my PCIe NIC: It is an Intel PRO/1000 PT Quad NIC, an ultra common one i guess everyone here should know and should be supported by...