nic

Liebes Forum, ich habe aktuell folgendes Problem: Ich habe heute den Proxmox Server 7.1-12 neu gestartet und nach dem Neustart funktioniert keine Netzwerkkommunikation mehr, weder zum Node selbst (z.B. WebGUI) noch zu irgendeiner VM. Der Server wurde von mir vor Monaten von Proxmox 5 auf...

I am trying to get my 10G NIC to show on the PVE. however I only have one, the onboard 1G connection. root@pve:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet...

Hello all, I recently bought a Mellanox ConnectX-4 EN MCX415A-BCAT NIC card, and installed it into my Proxmox machine. I can see it among the network devices, I can query it`s speed and it displays the expected value, which is 40Gbits. So everything looks, and works as I expect, but then I...

I was unable to see any of the 4 ethernet ports I have (eno1-4) using `ip link show` after upgrading to Proxmox 8. When choosing to boot from the earlier kernel, it immediately shows up. Is my NIC no longer supported? Included in this category because it is a kernel-level issue. Thank y'all...

I'm trying to figure out the best way to ensure corosync has its own network. Please let me know if any of these points weren't ideal and why: I created a VLAN with no gateway (just a space on my switch with a unique subnet) 10.5.0.X and set all 8x of my nodes to addresses on that subnet. I...

Hello Everyone, I'm sweating my bal*s off right now, i've been searching for a definitive and working answer for days but nothing seems to work. To start i use the onboard motherboard NIC as the main one, which is on 172.168.1.0/24 LAN, which is also working fine as intended. As a second NIC i...

Hello, After a fresh install, Proxmox is loosing his connectivity and showing this on console: If hit the return key it ask me to login so the host is not frozen. The NIC is an Intel one. The issue wasn't happening before in previous versions of Proxmox VE. Thanks, Guillaume

Hi guys! I need some help with a 10G NIC. A client was running a new server and the 10G appears on the web interface, but in the console not. How can i try to "install" this NIC in this server?

I have an 12 node homelab that is regularly losing quorum. I think it might be due to a combination of high bandwidth activities (e.g. backups to a separate PBS server) and corosync being latency sensitive. The 12 nodes are almost all 1L PCs (e.g. Dell and Lenovo tiny/micro form factors). I...

Hello there! I just started using Proxmox VE 7.4 (6.2) as of last week with a Lenovo ThinkCentre M900 Tiny I got off Amazon Renewed, mainly for the purpose of running it as an OPNSense router and as a host for Home Assistant OS, plus a few Docker containers. So far, I've been able to install...

Hello, Please help understand the correct setup. Current config: PCI shelf with one installed G25A - EMBEDDED SINGLE BOARD COMPUTER. Two IPs are defined: 1.2.3.4/24 for eno1 I/F 3.4.5.101/26 for enp4s0f1 I/F #ip a (only relevant): 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc...

Hi Guys Been trying to pass the 12th generation iGPU on my LXC container for some time now. The problem is, according to this thread https://forum.proxmox.com/threads/13th-gen-intel-proxmox-truenas-plex-hardware-transcoding-guide.125404/page-2#post-550285 It requires the kernel version 6.2. But...

Hello, gurus!!! Please help me to understand if my required configuration is feasible. Current config: PCI shelf with one installed G25A - EMBEDDED SINGLE BOARD COMPUTER. According to G25A docs - there are 3 ETH ports on the front, indeed the LAN cable is connected to the upper ports and it's...

When trying to create a Linux Bridge I noticed that I am no longer able to view the interface names for my quad NIC. They used to be labeled enp4s0f0, enp4s0f1, enp5s0f0, and enp5s0f1 but no longer show up with ip a, ip link show, etc. I also receive an error stating that the bridge port does...

intel J1900 VT-x: enabled VT-d: unsupported virtual machine always see the connected network wire. The problem occurs when the lease or address changes DHCP.client. The virtual machine connects to the ISP and there are problems with the network connector, virtual machine may not be available...

Hello, Sorry to ask a daft question... I'm trying to set up pfSense for managing some devices (mainly scientific equipment) connected to a LAN but also requires access to the internet for initial set-up and updates etc. I'm using an old Supermicro server that has two NICs. One is attached...

So i have scoured the web for hours looking for my problem and i find things that are close but not clearly the same. Im seasoned in linux but its still a bit foreign to me so please forgive me. Anyway, as the title states, When I install my HBA (LSI 9210-8i with FW P20 IT), I lose integrated...

I am green as grass after a nice spring rain. I'd like to learn more about networking, and as the title suggests I'd like to create a system that ultimately has the WAN from my modem go through the Proxmox host (NIC 1) and out (NIC 2) to my WiFi router. I just need help being pointed in the...

Hello! I upgraded the kernel to 6.1. After installing a PTR-FU network card (RTL8125B) my main network card stops linking once the kernal boots and it is not reachable by the network, however it has the same IP as before. Any idea what it could be? Do you know if PTR-FU (RTL8125B) is compatible...

Good morning, I am looking for a network card to install to my proxmox server. After investigating, the realtek NICs give a lot of problems to install in proxmox, so I don't know what network cards I could install in my server. I currently have an AMD Ryzen 5 5600G processor, running...