nic

Hey everyone, I'm currently building a "proof-of-concept" for work using Proxmox. I have a 4x1Gb LACP config (see below), but I get slow performance from my VMs. I'm using a 400MBps NAS storage that works perfectly when a 10Gb non-vm client is tested. On Proxmox I have 3, Win 2012 r2 VM's with...

Hi guys, I have minimal info right now and i know i should be better off writing this at home with full access to completely test as I've done before hand with the same end result. Here it goes, Not trying to reinvent the wheel here, most of this i am all very new to but i don't know how...

I have a weird issue that I'm not sure what to check anymore. First here's my pveversion: pve-manager/4.4-13/7ea56165 (running kernel: 4.4.62-1-pve) I have a LXC container that I've moved from another host and everything is fine except for one thing. I have severe packet lost when pinging both...

I have 3 network interfaces on a home system. One GB NIC on the motherboard and two in a dual port GB NIC. With Proxmox 3.2, the NIC names were as expexted: eth0, eth1 and eth2. In testing Proxmox 5 BETA, the interface names are now: enp4s0, enp3s0f0 and enp3s0f1. Is this expected/normal?

So I posted on here a while ago, here's the link: https://forum.proxmox.com/threads/linux-noob-can-only-ping-localhost-nic-problem.31415/ I left it for a while, not touching my VM PC for about 2 weeks, until now. I booted up the system and ran a ping <IP> -t from my PC, which, left over ~10...

Hello, everyone! I am having trouble getting my NIC drivers compiled and installed with proxmox. As you can see below, the card I'm trying to get working is a: 82571EB PRO/1000 AT Quad Port Bypass Adapter I have followed the directions at the following two links with no luck...

So before we start, let me say that when it comes to Linux I don't really know what I'm doing. I just followed the instructions to install ProxMox and that's it. I configured the network correctly, my default gateway and DNS is my router's IP, my subnet is /24, and my IP is 192.168.1.101. I...

Hi, I used to have my proxmox with one nic and a gateway to my ISP router (172.28.64.2) Nowadays, we have 2 internet providers, each with their own routers and different IP range. I added a second NIc to proxmox and what I want is to create some VM that will use this second nic and the second...

Trying to passthrough my nic with proxmox for a pfsense vm. I tried to follow this: https://pve.proxmox.com/wiki/Pci_passthrough But when i update grub with GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on" i get the error: "DMAR: Allocating domain for dcdbas failed" and i lose access to the...

Hi, I have a 3 nodes cluster with Proxmox 4.2. Each network card (eth0) of the hosts is in a dedicated VLAN used to sync the cluster. I also have a shared storage through NFS on a FreeNAS for the Promox backup on the same card and VLAN. VMs are on other cards and other VLANs. I have a...

Hello I'm running proxmox 3.4-6/102d4547 for about a year and so far I'm pretty satisfied. A few days ago I created a new virtual machine, to be used as an Ubuntu 16.04 x64 LTSP server. The hardest part about this is the pci passthrough. Since the ltsp server usually uses 2 NIC's, one for the...