boot

Why Hello There! This evening I performed a regular upgrade to a client's long-standing (~2 years) hyperconverged PVE cluster. This cluster has some history but for the most part has been trouble free. The cluster is made up of homogeneous hardware, all Gen8 HPE Proliant servers with one node...

I use Virtual Environment 5.4-13 My problem is with a guest machine with CloudLinux. My server crashed and when I opened the console it appeared: After resetting the system, I encountered this and it froze: Reset did not solve the problem: Finally, when booting, I changed the kernel...

Hallo zusammen, mein Server (HP Proliant 360 gen8) bootet nicht von seinen Festplatten, wenn der RAID-Controller im "HBA-Modus" betrieben wird. Sprich : ich kann nicht von Festplatte booten, wenn ich aus dem "RAID-Modus" raus bin.. Nun zu meiner Frage: Der Server bootet aber von USB/bzw...

Hola, I am running 200+ vm's on 5 node cluster with 3 node Ceph strorage. Mainly W2019 and about a dozen W2016. 1 W2016 machine running SQL has a strange phenomenon. When i do a restart the following happens: Bios screen Proxmox shows shortly. Than the machine hangs for about 30 minutes...

So my setup is I installed a version prior to Proxmox VE 6.4 on my server and recently updated everything to VE 7.1. Since the installation was done in legacy mode I switched to the "Proxmox Boot Tool" which was recommended because of problems with GRUB and ZFS. So I used this tutorial...

Wir möchten gerne unseren Proxmox Server von Version 6.4 auf 7.0 (oder auch 7.1) upgraden. Da unser Server nicht mit UEFI installiert wurde habe ich gelesen das ich zu dem "Proxmox Legacy Boot" switchen soll, da GRUB Probleme hat wenn ZFS auf der Root Partition läuft. Dafür sollen die vfat...

Hallo zusammen, Ich betreibe Proxmox in der aktuellen Version mit u.a. einer Windows 11 VM. Der im Host eingesteckte bootfähige USB-Stick wird erkannt und richtig in die VM durchgereicht. Der Stick bootet in eine physischen PC einwandfrei, in der VM jedoch nicht, weil er im Bootvorgang nicht...

Hello, We are in the process of installing and configuring 4 clusters of 3 nodes and automating templates creation using Packer. We have a strange behaviour where for some clusters Packer template creation works fine and for others we are faced with a bug during the boot process. First, some...

Hi. I don´t know if this is a dumb question but i am trying to install proxmox on an old laptop with broken screen. I am installing from USB and would like to disable the built in display in grub boot menu as the screen is extended and i can only see the blank extended part on my second...

Hi, I'm pretty new to proxmox, we set up proxmox server for testing and as we were using xen hypervisor before, we are trying to migrate our VMs we can copy all the data using rsync (the xen hypervisor had partition images rather than disk images) and everything seems working fine I boot LiveCD...

Hallo, seit einiger Kernelversionen startet Proxmox nicht mehr und bleibt mit der Meldung: snd_hda_intel 0000:00:1b.0: no codecs found! stehen. Nur ein Boot im Recovery-Modus ist dann noch möglich. Früher lief Proxmox auf der selben Kiste ohne Probleme: Version: pve-manager/6.4-13/9f411e79...

Dear proxmox community, I have proxmox (pve-manager/6.4-6/be2fa32c (running kernel: 5.13.0-19-generic)) installed on a ZFS root file system that is mirrored across two SSDs (sda and sdb). Recently, I had to successively replace both SSDs due to disk failure in the process of which I think I lost...

Hi guys, I'm facing a strange issue after a simple reboot. The network is not coming up properly. systemctl status networking shows: root@pve:~# systemctl status networking * networking.service - Network initialization Loaded: loaded (/lib/systemd/system/networking.service; enabled...

Hi, With LXC, I can have : Host : /data/vm/rootfs And the LXC VM boot on /data/vm/rootfs, which is a simple directory on the host. How to do the same thing under Promox ? I can create a raw file to become the rootfs then add with : pct set <id> -mp0 /data/vm/rootfs/home,mp=/home,backup=0 But...

Hi, I can't seem to boot after creating a zfs pool of 5 drives after rebooting for the first time. I remembered adding the pool at /zfs as a directory (to add CT images and ISOs and all) but it's basically empty. Don't mind destroying and recreating the pool if it means I can reboot and not...

I've just vzdump and restore the VMs and change the storage to ZFS, after that, I 've tried to boot VM, but found I have these issues sometimes on some VM: IO wait / resource usage is normal. pveversion: root@cn-hk1:~# pveversion -v proxmox-ve: 7.0-2 (running kernel: 5.13.5-1-edge)...

Hello, For reference I believe this started after upgrading to 7 (I also replaced my PSU at the time but not sure if that would cause the issue) but before I upgraded, it took a few minutes for my 2 HDDs to activate on boot. Now I have to manually deactivate using lvchange -an HDD-#/HDD-#_tmeta...

Hi guys, Nowadays I usually boot with CSM (Compatibility Support Module) on via Legacy mode. However I would like to boot using UEFI mode so when I turn of CSM and boot it will throw me into initramfs and throw me an error. The error is "Cannot import 'rpool' unsupported version or feature"...

Hello everyone, I couldn't find an answer to this problem. Let's say I have several OS VMs like Win, MacOS, Linux Desktops. To save power consumption and resources it would be a cool feature to boot up a VM when a thin client boots up itself. Can I trigger a boot command in an easy way? Thanks...

Hi Having updated through the GUI one of my cluster servers now fails to boot, stuck at this prompt. "Found vol group 'pve' using meta data lvm2". Does not progress from this prompt, I have left it for over an hour. Haven't tried the other server. Regressing to 5.4.78-2 works. I have...