boot

Was doing a "routine" update to the system after having not updated things for a few months, but am on PVE 7.3-3. Hit the following message: For searchability, here's the body of text: Configuring grub-pc: GRUB failed to install to the following devices: /dev/sda /dev/sdb /dev/sdc /dev/sdd...

Hi Everyone, I just installed the latest Proxmox VE onto a DellR730 with a PERC H730 running in HBA mode with 4 SSD's. I set up the SSD's as a ZFS and it was showing 2 partitions. One named local and the other named local-ZFS and from what I understand the local partition was where the boot...

Hi guys! I have a nextcloud in one of my containers, but since 2 days ago, this container won't start. I am a little noob in all of this and from Argentina, my English is rusty, so be patient. My tasklog My syslog I think it is a corrupt block on the HDD and if I'm right, how can I fix it...

Hello! Help, please. Debian starts automatically and everything is fine. When I start trisquel, I get a black screen, but by press "ctrl + alt + del", and click "Esc" for choose disk boot, click 1 disk, I have grub and normal start OS, but requires such a start-up every time. How to fix it? I...

I have been running 5.15.74-1-pve just fine, and am able to boot this kernel release without any problems. 5.15.83-1-pve will hang and require a power cycle to get back into the boot prompt to select another kernel. I have already tried 'update-initramfs -k all -u' and 'pve-efiboot-tool...

I have a dell PowerEdge r620 2x E5-2680 v2, 128Gb RAM, Proxmox is installed on a 220GB SSD. I have searched hard and I can't find a way to fix the problem :/

I've put a bash script at /etc/init.d, changed in to executable but Proxmox doesn't execute it when it boots. How can I add a command script to execute when Proxmox boots?

Hello, I am new to proxmox and LXCs. One of my LXCs suddenly won't boot anymore. Three others are working fine. I did some research on my own and found two possibilities: ZFS problems or a kernel update. But I'm using ext4, so maybe it's the problem of an "apt full-upgrade"? The error message...

Hi everyone, We are having a wierd issue, we have proxmox set up on a seperate ssd which works fine, another drive (m2) that contained a VM, has run out of buffer threshold and has gone to read only. That is all fine, we have recoved the data, and have the VM's running again from a new ssd...

So i recently acquired an old Lenovo M series SFF pc and wanted to use it for my Proxmox install. I had a a PCie m.2 adapter that i put a WD 256gb m.2 nvme drive on and was able to install proxmox on it. However when the system reboot I realized that it wasn't seeing the nvme drive. After...

Hello everyone, im trying to install Proxmox 7.2 VE on my HP ProLiant DL380 G6. I get into the Bootloader and after booting the Kernel i see the initsystem Output. But at the Point where Xorg with the Installation starts, my Monitor (FullHD 60Hz) goes blank and shows an "Signal out of range...

Hello! I have a Proxmox host here which had a problem with one of 4 HDDs. This HDD has now been replaced, since then the host boots into grub rescue mode with "checksum verification failed", before the replacement the boot HDD was the (hd0), since replacement it is the (hd3,gpt3). After...

Hey guys! I'm just a guy who has Proxmox to run a server at home. After running the server 24/7 for months, I cannot boot Proxmox anymore :(. I tried to fix the boot running the setup but I didn't fix it. I install a new version in a USB and I can see the SSD in Disks, but usage is 'NO', GPT...

Hallo, nach einem Umzug meines rpools von zwei Hdd auf zwei nvme habe ich auch gleich auf uefi gewechselt. Aber ich habe wohl etwas falsch gemacht. Jedenfals bekomme ich nach dem "sonst erfolgreichen" Umzug jetzt bei apt installs oder apt autoremove folgende fehlerhinweise: root@pve:~# apt...

Hi, I am witnessing an issue with LXC containers in PE 7.2 with different containers, based on different templates (Debian 11 and Ubuntu 22.04) and now even different nodes. When I set up a container and install Docker with Portainer or AdGuard (which then would be the only service for the...

I have a Dell H310 Server with 8 1TB disks. I created one virtual disk with disk 1 and disk 2 with raid0 configuration. The other 6 disks are set to Non-RAID mode. Then I installed proxmox on the 6 disks with zfs raid10 configuration. The virtual disk will be used for backup storage. Now, in...

After performing some upgrades, I noticed that the server didn't came back online. I was abroad at that time. Now I see via the iDRAC console that I have a ACPI error: No handler for Region[SYSI] 00000000f42c25ab [IPMI. I found a similar thread here which let me go a little bit further. It...

Liebes Forum, wenn der Host kein UEFI BIOS hat, sprich im Legacy Mode gebooted worden ist, gibt es dann die Moeglichkeit den Gast im PROXMOX mit UEFI zu booten? Mir ist aufgefallen, dass bei qemu die Moeglichkeit besteht, den Gast mit dem Parameter '-bios /usr/share/ovmf/OVMF.fd' zu starten...

Hallo zusammen, wir haben zum wiederholten Male ein recht unangenehmes Phänomen beobachtet: Proxmox1 wird gebootet, was bei Proxmox2 dazu führt, dass es einen kurzen Netzwerkunterbruch gibt. Gibt es hier bekannte ähnliche Fälle? Was genau tut ein Proxmox wenn er bootet, was so ein Verhalten...

Hi everyone! Another post in the saga of upgrading my Proxmox node from PVE 6 to 7. This time I'm trying to switch my legacy boot system to the Proxmox Boot Tool. For reference I've been following this guide on the wiki and am currently using RAID-Z1 with two disks. When I run lsblk to find...