boot

Hi, I have six Proxmox hypervisors (various licenses) running 5.4 which I began upgrading this week (to 6.2-4). I'm on the second machine today and running into the same problem that I had on my first upgrade. There is an LVM volume defined from the 5.4 Proxmox install which is tagged with...

Hi everyone, Proxmox and all it's VMs froze earlier today with no way to interact with the system (web interface said that a connection could not be established) so it was hard reset. There are no discernible error messages and it just stops at the end of the following (with a blinking...

I want to move Proxmox Virtual Environment 5.4-13 from a hard disk to a slightly larger SSD. I tried booting into a live cd and using dd to copy the entire disk / block device to the other disk. dd if=/dev/sda of=/dev/sdb bs=64M This seems to work okay. All the partitions enumerate correctly...

Hey, ProxMox ver: 6.0 Debian: 10.3 I have installed Proxmox on my server with Debian 10. I got no errors and after the reboot it did not boot into Proxmox kernel, but it booted in debian. Does anyone know a solution to that? grettings 0utplay SOLUTION: Reset the server and reinstall debian...

HI i have a strange problem, the boot worked like a charm since several month and now when I reboot the server don't load the service like apache2, cron, mysql etc... I need to enable them by hands. Could you please give me some info how I can find the problem Thanks a lot in advance! ps: if...

I just build a kernel with a few patches and modified EXTRAVERSION(5.3.13-1-navipve). However, I'm unable to add a boot entry for this kernel I also tried to add It manually with: pve-efiboot-tool kernel add 5.3.13-1-navipve It tells me to do a refresh and even then the kernel is not listed. Any...

Hi all, Recently my home PVE server has been unable to boot properly, hanging at 'Loading initial ramdisk...'. I've done some searches and followed what information I've been able to find, but as a rather inexperienced linux user, I'm at an impasse. It's been about a year since I set this...

I am trying to boot a compilation environment that we have and which was behaving quite well until we reached this problem… It simply refuses to boot ! The disk is located on an NFS v.4 mount (as all our disks). We have had no particular problem until this failure…...

Hello everybody! I had an strange situation this weekend and was wondering if there would be a "right" way to to what I did. I have an server with only one SSD as boot drive, which was installed with ZFS by the proxmox installer. This was arround 6 months ago. This weekend, I added an second...

Hello, I reinstalled proxmox recently(because I wanted to change from raidz-2 to raid10) - previously I was using all 5 disks, but with raid10 obviously I had to use 4, so I did(but 5th drive was still connected all the time) During installation I checked "--do not use--" on 5th drive, but after...

Hello, I'm wondering what the proxmox teams recommendations are for ZFS. I see proxmox now support UEFI boot and supposedly rpool supports all ZFS feature flags in this configuration. During installation of Proxmox the "rpool" is generated. The ROOT is there for booting. And rpool/data is...

Wir haben Proxmox mit ZFS für die Systemplatte aufgesetzt, hat bis jetzt auch reibungslos funktioniert, auch Neustarts. Nach dem letzten Kernelupdate hat der Node automatisch einen Neustart gemacht und landet jetzt immer nur noch im GRUB prompt. Versuche, den Resuce mode zu starten, scheitern...

Hi There, I currently have a 2-node PVE 6 cluster (and 3rd node QDevice), with the 2 nodes operating headless with PVE installed as ZFS on EFI (systemd-boot). If I want to test the new PVE Linux 5.3 kernel on one of the nodes, I understand that I just need to do: apt update && apt install...

I'm trying to install Proxmox on a new build PC via bootable USB and as soon as it hits "Starting Proxmox installation" the text garbles and becomes unreadable. Things I've tried so far: Ctrl + Alt + F(N) to switch to a different X window, all the same garbled mess. Booting with debug options...

Hi, I was getting this error in syslog: nf_conntrack: nf_conntrack: table full, dropping packet To solve this issue I found this: CONNTRACK_MAX = RAMSIZE (in bytes) / 16384 / (ARCH / 32) Having Mellanox NIC installed on my server I followed the recommendation to improve performance. This...

I have a system setup been working awesome for about a year now, yesterday I performed a shutdown correctly to install a power strip, when I turned it back on, the system went through all it's checks but would die when it came time to boot proxmox, I checked the server out, all checks said it...

Hi, I installed PVE 6 with ZFS on two SSD drives on an IBM x3650 M3 server with a H200 SAS controller cross-flashed to IT mode. The installation process ended correctly but after the reboot the server does not boot, nor in UEFI mode nor in legacy mode. If the USB drive is plugged into the server...

I need that VMs boot over network with UNDI PXE boot rom, not iPXE. How do I make this trik ?

Hello! We have a three node cluster, the storage for the vms is ceph. I have migrated lot of physical server to pve with clonezilla, i have also converted round about 15 vmware vms to pve. In the past without issues. Now we had the problem (the third problem/server after a while) - an ubuntu...

Hi, I've got a Proxmox installed on a ZFS RAID1. I've also noticed that the two root disks have 3 partitions: "BIOS boot", "EFI system" and "ZFS". I wonder what happens, when one of the root disks fails. For ZFS it should not be a problem, but what about booting the system? Are the first 2...