proxmox 8

Hello everyone, After my first installation of promox I have this Warning: "nvme 0000:01:00.0: AER: Error of this Agent is reported first" My computer Model: HP Z640 Processor: Intel Xeon 1640 V4 RAM: 4*16GB DDR4 2400 MHz ECC NVME: PCIe Samsung MZVKW512HMJP-000H1-HP I have 2 other computers...

Dear Proxmoy-Experts, Since some days now, the performance of every machine and container in my cluster is extremely slow. Here some general Info of my setup I am running a 3 node proxmox-cluster with up-to-date packages. All three cluster nodes are almost identical in heir hardware specs...

I was unable to see any of the 4 ethernet ports I have (eno1-4) using `ip link show` after upgrading to Proxmox 8. When choosing to boot from the earlier kernel, it immediately shows up. Is my NIC no longer supported? Included in this category because it is a kernel-level issue. Thank y'all...

Hi! There is a Netflow/IPFIX package for iptables in the base Debian12, but not compatible with the pve8 kernel 6.x Is there any way to make it to work? https://bugs.launchpad.net/ubuntu/+source/iptables-netflow/+bug/2023306 $> aptitude search netflow p iptables-netflow-dkms...

Good Evening Proxmox Support, I have a 1 TB Samsung 970 SSD and a 2 TB Samsung 870 SSD. I Freshly reinstalled Proxmox VE 8 (Graphical) and setup the drives as ZFS (RAID0). After the install was finished it says the total amount of space that my ZFS Storage pool is 5.7 TiB. now, I am...

Das Backup wurde bereits genutzt und auch für den restore, ich habe nun aber seit neuerem (genauer Zeitpunkt unbekannt) folgenden Fehler beim File restore: drive-scsi 1&2 sind beides identische Festplattenkonfigurationen mit NTFS Diek 2 funktioniert einwandfrei, bei Disk1 erhalte ich...

Hello, I have changed IP Addres room of my network (before: 192.168.178.0, now 192.168.173.0). My PVE (Single node) had the static IP 192.168.178.34. now of course I can't access the web interface. How can I change the IP manually via cmd (to 192.168.173.34)? Hopefully someone can help me.

When I enable wsl2 through windows platform, win11 vm immediately starts to boot into advanced recovery console. Any advice? I run Windows 11 as vm inside of proxmox 8. I successfully set gpu passthrough, and I am able to run Nvidia GPU inside of Win11. I can run games, furmark etc. But when I...

So i am installing proxmox 8 and it is frozen at 70% (extracting pve-kernel-6.2.16-3-pve6.216-3_amd64.deb) its been stuck for over 30 minutes.

I'm still kind of new to proxmox. I paused and shut down my VMs, click "shut down node" and then moved my hardware. When I turned it back on, I got the above error, as well as [ TIME ] Timed out waiting for device dev-sdb.device - /dev/sdb [DEPEND] Dependency failed for mnt-vmstorage.mount -...

Hello, I just upgraded from PVE 7 to 8 following the doc, the check list has no errors nor warnings. However, when rebooting after the upgrade, I tried to login physically, I didn't have time to finish writing the password and it rebooted by itself. Second boot I wrote the password and it...

I just bought a HP Proliant DL360 G9 with the following config BIOS P89 v242 (04/25/2017) 2x Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz 2x DIMM DDR4 16384 MB 2133 MHz Smart array P440ar Boot mode UEFI 2x Samsung OVO 870GB SSD 1 array of RAID 1 is created on the smart array The ISO is...

I'm facing the following issue on pve-manager/8.0.4/d258a813cfa6b390 (running kernel: 6.2.16-8-pve) that i can't edit files in /etc/pve due of permisson errors. root has only read-only rights on this config files. But i has to edit those files as root, due of issues with the otp auth...

Hello I'm new to proxmox, I had installed and could not access the web gui, when trying to fix it could not update, when pinging google got name resolution, but when pinging 1.1.1.1 got results. I also discover that I don't have these files /etc/pve/dhcpd.conf, /etc/dnsmasq.conf...

Hi there, I've tried to do as much reading up as I could on this before posting. I got the main takeaway that for debian 12 the AX210 was included so some of the issues I read for earlier versions don't apply now. I've struggling to get the interface to work with similar messages from...

Hello everyone, I have some interesting times lately. We had no problems with Proxmox 7 and everything was working and so we wanted to try new version 8. Installation went ok, both network ports were working during installation and data were flowing, but right after the restart after successful...

Hello, I did an upgrade to PVE 8 and after that I started receiving errors on all NVMe drives I have in cluster (3 node cluster). There are informations of my NVMes (6 same disks - 2 per node) # smartctl -a /dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.16-4-pve] (local build)...

Moin, wenn ich meine Proxmox VE (8) Instanz aus dem Web her aufrufen möchte erscheint mir ein schwarzer Bildschirm (Keine Fehlermeldung, nichts) d. H. ich komme auf den Server drauf (Sehe Logo in der adressleiste und das es ein ungültiges Zertifikat ist was eigentlich Standard ist) drum wollte...

Hello, I just upgraded from 7.4 to 8, everything went ok until now. I have 2 nodes at home, which I use in a cluster. The node I am having trouble with is the one I upgraded (both are, but the other one I had to do a fresh install). I followed every step on the wiki and it all went fine, just a...

I am trying to install Linux x64 (AMD64/EM64T) Display Driver Version: 390.157 (the last supported by my video card) on my freshly installed pve-manager/8.0.3/bbf3993334bfa916 (running kernel: 6.2.16-3-pve) in order to do GPU passthrough to my LXC container. Installed all kernel headers...