crash

Hello, I'm completely new to PVE and have started using/learning it since 2 weeks ago. Yesterday I was able to configure an LXC appliance like I wanted and left it to download something over night. When I came home an hour ago, I noticed that my samba share (installed directly onto the PVE) has...

Used Hardware: Intel Core i5-10400 6x 2.9GHz MSI H510M-A PRO 32GB RAM (2x 16GB) Corsair Vegeance LPX black DDR4-2666MHz be quiet! Cooler Pure Rock Slim 2 400W Power Supply 250GB M2 SSD (Proxmox Install) 2x 250GB SSD (configured as zfs raid 1)...

Hello All, I'm relatively new to Proxmox and have been using it for the past 6 months without issue. I currently have a HP DL380P Gen8 server that is using a P420 RAID controller card in HBA Passthrough mode with 8 1TB Samsung QVO SSDs for storage. I've been using it in ZFS for quite some...

Hi everyone I have 4 nodes running 7.1-10 with each node having 5 x SSD's. I have set up CEPH and created monitors, managers and metadata servers on all of the nodes. I know that not all nodes need to have these set up but the plan is to expand this cluster in future. I've created OSD's for all...

Hi, ich habe in den Vergangenen Zeit immer wieder das Problem gehabt, dass mein System einfach stehen bleibt. Es reagiert nicht mehr über das Webinterface oder über SSH. Auch die VMs/CTs sind nicht zu erreichen. Wie kann ich eine Lösung für dieses Problem finden? Hier der Syslog für die...

Hey, since Friday my PBS crashes when backing up. Here are the last lines of syslog before I have to hard reset the server, because it becomes completely unresponsive. No Web interface, no pings. Feb 14 00:33:48 backup proxmox-backup-proxy[1842]: vm/107/2022-02-04T23:00:42Z remove Feb 14...

Hi, I notice an error inside my ceph-mgr log. 2022-02-02T15:51:21.405+0100 7f13aaf3e700 0 [pg_autoscaler ERROR root] pool 13 has overlapping roots: {-2, -1} 2022-02-02T15:52:21.413+0100 7f13aaf3e700 0 [pg_autoscaler ERROR root] pool 13 has overlapping roots: {-2, -1}...

Proxmox VE will randomly be totally non responsive. Looking at the latest syslog it appears that it encountered error and attempted to reboot but was not able to. Below are excerpts from syslog. Jan 16 02:12:18 UIG-VM kernel: x86/split lock detection: #AC: kvm/1095 took a split_lock trap at...

Good day all, I've found that my PVE has crashed tonight. I've lost all monitoring at 0150, and the host has been in limbo since. Not only that, but I had run apt upgrade yesterday, so this might be related. SSH isn't working, nor is the GUI. I can log in to the console, but I cannot get a...

this is more than 6 months since I have had this issue, proxmox server crashing randomly. and the only thing I can do is reboot the system by pressing "Reset Button" the output of "pveversion -v" proxmox-ve: 6.4-1 (running kernel: 5.4.157-1-pve) pve-manager: 6.4-13 (running version...

Hello, Periodically my proxmox server will crash, and the tasks at the bottom will show that "Update package database" was started, then the system is booting and starting VM's. I am able to trigger crashes by navigating to updates for the node, and running "refresh" a few times until it...

For some reason most of the cluster is crashed (servers rebooted) it became stable after the reboot but there was a small downtime . i tried to find the reason in the loges but i could not understand what caused it here are the logs of the cluster from one of the nodes that was not rebooted (on...

Hi, guys! I have a physical server colocated somewhere in Romania, an HP Cloudline CL3100 G3. It has 2x new SSD disks on RAID1 and 4x refurbished SATA disks on RAIDZ-2, promoxmox installed on RAID1. I use this system linked with whmcs module and in both situations, host node got frozen...

Hi, Recently, I have my new rig with AMD 5800X and asus tuf x570 gaming plus wifi. The GPU is evga rtx3070 and ram is 16 gb. I have a nvme ssd pcie 4.0 512 gb and one 1 tb sata HDD. I tried to install latest proxmox on it. During setup, it stuck at the initial start up for a while. Finally, it...

Hello, I'm encountering this weird problem where my entire Proxmox host freezes shortly after I start the plexmediaserver Service inside a VM. (It's reproducible) Sometimes the host freezes after a few minutes, sometimes seconds thereafter. Without the plex service running, everything runs...

Hi, I tried to upgrade a 6 nodes pve7 cluster yesterday. We use Ceph and HA for all VMs. I was able to upgrade 4 nodes without issue. But on the fifth node, I lost the whole cluster. All nodes rebooted ! Syslogs for nodes 22 to 27 : update ok for nodes 22,23,24 and 27 upgrade of node 25...

Hardware: CPU AMD Ryzen 1700X GPU GeForce GTX 470 Software: Proxmox VE 7.0 Guest OS Ubuntu Desktop 20.04 Erfolgte GPU passthrough Einrichtung gemäß: https://pve.proxmox.com/wiki/Pci_passthrough GPU passthrough mit Ubuntu Desktop 20.04 funktioniert nicht und der Host stürzt ab / bleibt hängen...

After doing the initial install of proxmox 7 and setting up 3 VM's I noticed the server went offline over night. Turns out it had a kernel panic, I took a picture of it. My hardware: AMD Ryzen 7 2700X 4x Corsair CMK16GX4M2B3200C16 8GB (NOT using D.O.C.P/XMP) Asus PRIME-X470-PRO (Latest bios...

Hi all, after an upgrade (on Friday night) to Proxmox 7.x and Ceph 16.2, everything seemed to work perfectly. Sometime early morning today (sunday), the cluster crashed. 17 out of 24 OSDs will no longer start most of them will do a successful ceph-bluestore-tool fsck but some will have an...

Noticed a dstat crash while shutting down a VM. Just upgraded from Proxmox 6 to 7 yesterday, this was a fresh install of Proxmox 6 just a few days ago. No VM's had been made yet. Made a new VM today, Ubuntu Server 20.04. Used it for about an hour and then installed the qemu agent and did a...