crash

Hi, Recently, I have my new rig with AMD 5800X and asus tuf x570 gaming plus wifi. The GPU is evga rtx3070 and ram is 16 gb. I have a nvme ssd pcie 4.0 512 gb and one 1 tb sata HDD. I tried to install latest proxmox on it. During setup, it stuck at the initial start up for a while. Finally, it...

Hello, I'm encountering this weird problem where my entire Proxmox host freezes shortly after I start the plexmediaserver Service inside a VM. (It's reproducible) Sometimes the host freezes after a few minutes, sometimes seconds thereafter. Without the plex service running, everything runs...

Hi, I tried to upgrade a 6 nodes pve7 cluster yesterday. We use Ceph and HA for all VMs. I was able to upgrade 4 nodes without issue. But on the fifth node, I lost the whole cluster. All nodes rebooted ! Syslogs for nodes 22 to 27 : update ok for nodes 22,23,24 and 27 upgrade of node 25...

Hardware: CPU AMD Ryzen 1700X GPU GeForce GTX 470 Software: Proxmox VE 7.0 Guest OS Ubuntu Desktop 20.04 Erfolgte GPU passthrough Einrichtung gemäß: https://pve.proxmox.com/wiki/Pci_passthrough GPU passthrough mit Ubuntu Desktop 20.04 funktioniert nicht und der Host stürzt ab / bleibt hängen...

After doing the initial install of proxmox 7 and setting up 3 VM's I noticed the server went offline over night. Turns out it had a kernel panic, I took a picture of it. My hardware: AMD Ryzen 7 2700X 4x Corsair CMK16GX4M2B3200C16 8GB (NOT using D.O.C.P/XMP) Asus PRIME-X470-PRO (Latest bios...

Hi all, after an upgrade (on Friday night) to Proxmox 7.x and Ceph 16.2, everything seemed to work perfectly. Sometime early morning today (sunday), the cluster crashed. 17 out of 24 OSDs will no longer start most of them will do a successful ceph-bluestore-tool fsck but some will have an...

Noticed a dstat crash while shutting down a VM. Just upgraded from Proxmox 6 to 7 yesterday, this was a fresh install of Proxmox 6 just a few days ago. No VM's had been made yet. Made a new VM today, Ubuntu Server 20.04. Used it for about an hour and then installed the qemu agent and did a...

To cut a long story short. My VM crashed, and became unusable, The OS support couldn't get it to function properly and their efforts resulted in it failing to boot with a catologue of errors. Before the failed attempt to reboot, it was clear that the data I need from it (website domain files...

Proxmox installed and was working properly. I started to add VMs and about once a day it will have a kernel panic and i will have to hard reboot it. It seems to be an issue when the VMs start to do some actual processing of any kind. It has a Ryzen 5 3600 cpu. I am not running server grade...

Hi, I have a VM that crashes every 10 days or so. I initially attributed the issue to something in Windows Server 2012R2. I wrote a little script to check status on this VM every 30 seconds, and restart it (and email me) if it crashes. The script just uses this: qm list|grep $VM_NAME |grep...

Hello, We experienced three kernel crashes during guests backup of two distinct Proxmox VE fully-updated 6.4 hosts running on 5.4.114-1-pve Linux kernel. Backups are using the stop mode and a NFS mount. Other hosts running Proxmox VE 6.3 on Linux 5.4.106-1-pve did not triggered the problem...

Hi my Proxmox hard crashes, no recovery, has to be powered off. It was OK for the first month, I put it in late March, it was a new hardware build. Towards the end of April however i got intermittent crashes. This morning I checked, it had crashed overnight, I restarted it, it crashed in a few...

I am attempting to pass through my main gpu (GTX 760) on an B550 Aorus Master MB with an amd 5900x processor. (I do not need the GPU on my system and am perfectly comfortable managing things through ssh and the web interface.) I have followed the guides and my GPU IOMMU group seems to be...

One of my Promox servers running on an old HP Proliant G6 DL380 has a problem, the storage part of the server died yesterday, it is a hardware raid setup. So the server or system refuses to start without it, is there a way to force start Proxmox and ignoring the missing raid array?

We have a Proxmox set-up of three nodes sharing some 15 VMs. The nodes and VMs are behind an actual router. This has been happily running for a couple of years now without much trouble, until recently. I wanted to update a box from Debian 9 to 10, and during the `apt upgrade` (which would...

Hello everyone! I have an issue where I can't boot up a Windows server 2012 R2 setup ISO. It loads the files (the white bar part), then it goes to the loading screen (spinning circle), and then the VM just shuts off. I have tried the Windows 2012 R2 best practice list without success. Also I...

Hello together, I just want to share an experience with migration of one of our servers which resulted in bsod right just before login screen appears. First of all, thanks for proxmox and its availability. We started with multiple test VMs and productive VMs being itself part of a testsytem...

Hi I have been struggling with this for weeks now, my Proxmox host crashes usually about 18 to 24 hours after a start, sometimes sooner. I am not finding anything specific in kern or messages logs, at least as far as I can tell by googling the errors. The most likely is a line that says this...

Hi all! I have been trying to fire up my VM for pfsense firewall(v2.5 community edition). That requires me to assign two network interfaces to the VM. I bought 4 port NIC card (Intel PRO/1000 PT EXPI9404PTG2L20 LP Quad Port Adapter 10/100/1000Base-T PCI-E). When I go into VM>Hardware the setup...

Trying to install Proxmox VE 6.3 on my good 'ol i5-2500 (Sandy Bridge) machine. Thing is, the built-in graphics have been badly supported by the Linux kernel since the dawn of time, causing the installer to freeze since it's trying to run in 'full' graphics mode. This is not ProxMox' fault, I...