crash

I am attempting to pass through my main gpu (GTX 760) on an B550 Aorus Master MB with an amd 5900x processor. (I do not need the GPU on my system and am perfectly comfortable managing things through ssh and the web interface.) I have followed the guides and my GPU IOMMU group seems to be...

One of my Promox servers running on an old HP Proliant G6 DL380 has a problem, the storage part of the server died yesterday, it is a hardware raid setup. So the server or system refuses to start without it, is there a way to force start Proxmox and ignoring the missing raid array?

We have a Proxmox set-up of three nodes sharing some 15 VMs. The nodes and VMs are behind an actual router. This has been happily running for a couple of years now without much trouble, until recently. I wanted to update a box from Debian 9 to 10, and during the `apt upgrade` (which would...

Hello everyone! I have an issue where I can't boot up a Windows server 2012 R2 setup ISO. It loads the files (the white bar part), then it goes to the loading screen (spinning circle), and then the VM just shuts off. I have tried the Windows 2012 R2 best practice list without success. Also I...

Hello together, I just want to share an experience with migration of one of our servers which resulted in bsod right just before login screen appears. First of all, thanks for proxmox and its availability. We started with multiple test VMs and productive VMs being itself part of a testsytem...

Hi I have been struggling with this for weeks now, my Proxmox host crashes usually about 18 to 24 hours after a start, sometimes sooner. I am not finding anything specific in kern or messages logs, at least as far as I can tell by googling the errors. The most likely is a line that says this...

Hi all! I have been trying to fire up my VM for pfsense firewall(v2.5 community edition). That requires me to assign two network interfaces to the VM. I bought 4 port NIC card (Intel PRO/1000 PT EXPI9404PTG2L20 LP Quad Port Adapter 10/100/1000Base-T PCI-E). When I go into VM>Hardware the setup...

Trying to install Proxmox VE 6.3 on my good 'ol i5-2500 (Sandy Bridge) machine. Thing is, the built-in graphics have been badly supported by the Linux kernel since the dawn of time, causing the installer to freeze since it's trying to run in 'full' graphics mode. This is not ProxMox' fault, I...

I have installed proxmox 6.3 INTEL NUC10I7FNH (64GB RAM, 1 TB SSD) a week ago and added a Debian VM and it has been working fine. 3 days ago I added another Debian VM and then a Windows 10 VM. Ever since the guests have been halting and the host has been throwing Input/Output error to every...

Hey there, I encountered a strange problem the other day. So first let me describe our setup. We use proxmox for VM and container hosting. Up until now, we used local storage (ZFS) in each of our hypervisors. As you know there are many drawbacks with only local storage. We finally wanted to have...

Long story short, I successfully installed windows 10 with 6900xt gpu passthrough and macos bigsur with igpu gvt-d passthrough (using this https://github.com/patmagauran/i915ovmfPkg vbios compiled by myself, if I use the pre-compile one does not work) Unfortunately whenever I start the 2nd vm...

Dear all, I am currently dealing with a problem in a hyperconverged (ceph) where the whole cluster reboots seemingly at random. Every single one (of the total of seven) node resets at the same time. I am suspecting corosync to not be able to communicate properly. This problem has only popped up...

Hallo zusammen, seit einigen Monaten betreibe ich einen NUC mit Proxmox als Vorbereitung für meinen zukünftigen Homeserver. Es laufen 9 VMs davon 4 dauernd. Alle 2-3 Tage crashed das System und ist nicht mehr erreichbar. Welche Möglichkeiten habe ich einen Log auszulesen? Der Cluster Log läuft...

Hallo, ich habe aktuell das Problem das mein Proxmox Server nach wenigen Stunden abstützt. Über ein angeschlossenes Display werden einige dinge angezeigt womit ich nichts anfangen kann. Steht da irgendwo die Ursache des absturzes ? Was kann ich tun? Mein Plan wäre jetzt einfach Proxmox neu...

Hi, all! I have the problem with PCIe Passthrough to my Windows 10 VM via Proxmox. I tried to passthrough this device (audio card): 02:00.0 Multimedia audio controller: C-Media Electronics Inc CMI8738/CMI8768 PCI Audio (rev 10) Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio...

Hello, I recently installed Proxmox VE on a Hetzner server according to their tutorial. Now, after setting up everything and running just one Windows VM, I'm experiencing random hard crashes (faillog and lastlog full of NUL (^@) characters). I thought this might be a hardware fault, so I've let...

Greetings I am experimenting with proxmox to see if it can be an alternative/replacement for vmware and so far I am impressed with the features and have one thing that is weird. When I rsync a lot of files to a (ubuntu) vm with a disk that is formatted ZFS (single disk) the memory runs full in...

Proxmox died today and it didnt reboot. The server was still on, but proxmox wasn't active anymore(black screen) Here are the last syslogs: c 16 03:52:03 pve vzdump[16817]: INFO: Starting Backup of VM 140 (qemu) Dec 16 03:52:48 pve pvestatd[1453]: status update time (5.363 seconds) Dec 16...

I have twice today had my host totally crash, while a guest was busy compiling and installing a bunch of different software packages (that load-case may be unrelated to the actual problem). Before this started happening, I ran Proxmox updates and rebooted the host, which included an update...

Hi, have a strange problem with one PVE (V. 6.1) host and its Debian 8 (old version for technical reasons) Guest. The guest crashes every now and then with no apparent reason, sometimes runs fine for weeks. The PVE logs say out_of_memory : Dec 10 18:09:39 pve kernel...