crash

Hello everyone, Today i'm co-fronting a issue, i have followed the tutorial like step by step but i can use my Nvidia Geforce on the VM with x-vga i don't know why my configs, vm103.conf dmesg | grep ecap to be sure than remaping is supported/or not supported my...

Hi everyone. As I user, I would like to thank you for this great product you are sharing with this community. Unfortunately, I'm not only here to thank you.. I recently started to have problems with some of the virtual machines in my installation. My hardware is a ryzon 5 2600 with 16 ecc gb...

Hello Everybody, I have some serious problems regarding some Windows VMs (Server 2016 and 2012r2), which are stopping without any reason or trace to any log (either /var/log/syslog or (after vm reboot within Windows Eventviewer)). The Server 2016 is running as MS AD DC, the 2012R2 Server is...

Hey, im new with proxmox and i used it for a while but it crashed yesterday. 1. I couldnt start my containers. 2. I tried to update proxmox to 5. 3. My proxmox now seems not running. the qm command is not working and pct also. I installed proxmox via the iso installer. I do not know what i...

Hi, After a big storm my two SSD RAID 1 crash (one dead ans one with too many bad sector) ... I'm not realy lucky ... I have replace the both SSD and re install proxmox RAID 1. My raid 5 is OK and after install mdadm all my VG/LV are ok and active. My question : How I could retore my VM with...

Hallo zusammen, gestern Abend meinen PVE Host aktualisiert. Alle VMs fein säuberlich heruntergefahren die Repositories aktualisiert, Upgrade, Host Neustart, super. Nach dem Neustart scheint alles wie immer. Alle VMs starten außer eine. Diese hat einen SATA Controller durchgereicht bekommen...

Hi all, One of my nodes crashed. Is there a place where I can post crashlogs? Cheers, Sp proxmox-ve: 5.2-2 (running kernel: 4.15.17-1-pve) pve-manager: 5.2-6 (running version: 5.2-6/bcd5f008) pve-kernel-4.15: 5.2-1 pve-kernel-4.15.17-1-pve: 4.15.17-9 ceph: 12.2.7-pve1 corosync: 2.4.2-pve5...

I have been having regular crashes for the past few months now. Sometimes my Proxmox box can't even manage to run for a week. The symptoms are usually as follows: one of my VM's goes to 100% CPU load and the Proxmox web interface shows a (?) for all servers. I'm not sure in which order this...

Hi all, we had a major outage of our cluster consisting of 3 PVE Host which servers Containers and VMs. In addition there are 3 Proxmox based Ceph servers. I was in the preperation to switch from running 4.4 to 5.x. 1. ceph 3 didn't come up after reboot. It turned out that the HBA controller...

Hey peeps, Tried to google this but not sure on exactly what to look for so if this has been mentioned please help me find it. Setup: Huawei 10G switch Supermicro Pfsense firewall Supermicro CTO Super Server (4 servers in 1 chassie) one 2x10G card in use on each server (only 1 10g link on each...

Since upgrading to 5.2, I've been getting VM crashes intermittently. They don't seem to be related to any one hypervisor and I can't actually tell what's wrong from the console message (below). Anyone have any ideas where to look for the problem? Seems like we used to get these years ago when...

Hello all, I'm having some issues with my Proxmox host. Sometimes it will randomly lockup and freeze everything. The consol will still apear but won't accept any entered keys, SSH and the GUI also don't work. I am passing through a Nivdia GT710 to a Windows 10 Client. I thought this was the...

Version: pve-manager/5.2-5/eb24855a (running kernel: 4.15.18-1-pve) /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on video=efifb=off" System Information: Gigabyte Z370 Aorus Gaming 3 Intel i7 8700k 16gb DDR4 SSD nvidia 1070GTX 8gb nvidia 710 1gb I run two virtual...

Hello, I've got a ready-to-use CentOS 7-based virtual appliance originally made for vmware and wanted to use it on PVE. It was quite easy to do so, just unpack the OVA, get the vmware disk images and dd them to my LVM partition, prepare a PVE guest for CentOS and then connect the LVM-based...

I installed a nvidia 1050 TI and passed it through to a windows guest, and that works great for gaming/streaming with a few cpu cores and some ram. But unfortunately it seems to reboot my physical server every time I shutdown or reboot the guest VM (since upgrading physical gpu) I'm not seeing...

We initially tried this with Ceph 12.2.4 and subsequently re-created the problem with 12.2.5. Using 'lz4' compression on a Ceph Luminous erasure coded pool causes OSD processes to crash. Changing the compressor to snappy results in the OSD being stable, when the crashed OSD starts thereafter...

Two issues - not sure if they are related: 1) I have promox setup to backup to NFS drive each night. The past few days the NFS drive was full, so the backup failed. However when the backup fails my VM becomes inaccessible via web. Pingdom reports sites down from 3:09 to 3:14 These are the...

Hello, I have installed Proxmox 5.1 (latest release) on my Supermicro server with an X10 board last week. Every 1-2 hours the server freezes and becomes unresponsive. Even typing in the IPMI KVM console doesn't work. Only when I do a hard hardware reset, the server reboots and boots proxmox...

Hello, I am completely new to Proxmox and have set it up on a Supermicro X9 motherboard with dual Xeon processors. I am using the Supermicro onboard intel gigabit LAN to connect the server to my router. I have something strange going on, when I start the server I can connect to Proxmox through...

Hi all, Recently updated my 3-node cluster as well as a standalone PVE host and after reboot I am having a specific problem with running Splunk Universal Forwarders, and it looks like a kernel panic. This is what I get when I try to start my Splunk Universal Forwarder: Any ideas? This...