windows 11

Hi I used gui option to increase disk space which was 75gb I increased it to 200gb. It was successfully done https://pve.proxmox.com/wiki/Resize_disks Issue is inside vm windows 11 still c drive is 75gb and not 200gb. How to access this space? How do I add drives partition inside vm windows?

Hi I have convert Windows 11 from HyperV to ProxMox. Windows wont start. What is wrong ? I have: SCSI Controller: VirtIO SCSI Single Disk: SCSI Disk Format: RAW please help Sokoban3

I have a PVE 8 running. One of the VM's is my 'daily driver'. A Nvidia dGPU is passed trough to that VM, along with USB hosts, and I'm running a dual monitor setup and the needed USB devices. Runs Win11. Works great for many months now. However, I'm looking to experiment with fedora as my...

Hello, I recently added a NVIDIA Quadro P400 as a 2nd GPU to my Proxmox Node for plex transcoding and PiKVM. My Hardware thus consists of ASRock x570 Steel Legend AMD Ryzen 7 5800x NVIDIA RTX 3060 NVIDIA Quadro P400 2x M.2 Samsung 980 Pro 1TB PCIE 4.0 ssd 2x sata 3 ssd's a bunch of sata hdd's...

Hello there, I'm new here and I start off with something that I haven't managed to find, but maybe I just can't search good enough. For a few weeks, I've been haunted by strange Win11 VM freezes, what happens is the most awkward OS freeze I've ever seen. The sound just stops to silence, no...

Hallo, I were introduced to proxmox by a friend and I like it alot but I am kinda of noob. I am a software developper that likes AI and games and to create things and I also like gaming so my goals come from that. I like that I can make my computer into several VMs and CT so I can develop...

When I enable wsl2 through windows platform, win11 vm immediately starts to boot into advanced recovery console. Any advice? I run Windows 11 as vm inside of proxmox 8. I successfully set gpu passthrough, and I am able to run Nvidia GPU inside of Win11. I can run games, furmark etc. But when I...

Im trying to passthrough my goxlr to my windows 11 gaming vm. I select the usbport that it is on but the VM doesnt see the go xlr please help

Hello everyone, I've ran onto this issue where I cannot seem to add any more USB devices to my VM, nor EFI Disks nor TPM states as the UI has them greyed out. Has anyone run onto this issue and can provide some input on how to address it? I'm on Proxmox 8.0.4 Thanks in advance!

Hello everyone, I am trying to enable secure boot on a Windows 10 pro VM in order to upgrade it to Windows 11 (requierement of PC health check app for the upgrade). This is what I am doing : - Adding a EFI Disk (efitype=4m, pre-enrolled-keys)1, size=1M) to the VM. - Changing the BIOS...

New Proxmox user here. I have a TrueNAS Core 13.0-U5.2 VM. It is installed in a WD Blue SSD named VMs_CT_Main. I have passed through a Dell H310 HBA to it with 8 HDDs attached. Below is the config of the TrueNAS VM. kristian@pve:~$ sudo qm config 100 [sudo] password for kristian: agent: 1...

Hello, i am doing a migration from PVE7.1 with LVM to PVE8.0 with ZFS using fresh hardware. So far 4 linux migrations went flawless: Create a backup, transfer the backup file and the configuration. Do the restore on the new host. But then there is also a W11 VM and this ends in a Bluescreen...

Is there a way to install Windows 11 on Proxmox 6.3-2?

Hello everyone! I'm experiencing high IO delays (18% - 30% and sometimes higher) when I start a Windows 11 Pro VM on Proxmox VE 7.4-13. I suspect it might be caused by running everything on a ZFS RAID 1 storage but then again I do not experience high IO delays when I run a Linux VM...it's only...

Hello everyone! I am having an issue with my windows 11 vm on proxmox. I am trying to set the CPU type to host but windows 11 stuck and get into automatic repair screen. If I set the CPU type to qemu64, windows boot normally. I would like to run hyper-v but I can't do that if I don't set the...

Hello, I'm new to PROXMOX, I installed and now I want to use MAC OS and Windows 11 with GPU Pass Through, I followed almost many tutorial, But I'm failed. When I try to check after following IOMMU enable guides it still shows like this : AMD-Vi: AMD IOMMUv2 functionality not available on this...

Hello everyone! I would like to ask your help for a very strange behavior that I'm seeing. I have several Windows and Linux machines running on Proxmox. Every machine is working great, with the exception of one. Already tried to delete it and recreate a lot of times but the issue persists. Also...

Hi guys, I'm trying to run Windows 11 Guest with WSL2. My config is the following: i5 12400 Proxmox 7.4-3 Kernel 5.15.104-1 Windows 11 Guest - CPU type is Host Nested Virtualization is enabled (Checked with cat /sys/module/kvm_intel/parameters/nested) When booting into Windows 11, Task manager...

I would like to setup my geust machine (Windoes 11) to sleep after some time. It helps to save energy. However, after going to sleep, it doesn't log in anymore via consoles or RDP. I use SPICE on Proxmox 7.3-4

Hi, My environment is a PVE7.1 & X86_64 architecture server; I want to install two test environments on it: Arm Linux and Arm Windows 11. I found a tutorial online: https://i12bretro.github.io/tutorials/0661.html And successfully installed Arm Debian; Here is my successfully Arm Debian VM...