ssd

Hi there, i am about to make my first server and i will use it for production use / website hosting. I have decided to buy either Dell R630 or Dell R730. So about the drives i am thinking to use an nvme card with 2 Samsung 970 Pro in raid1. All VMs will live in the nvme’s and i will add at...

Hello Proxmox Forum, I have since I installed proxmox permanently problems that after x amount of days apparently my ssds are offline or abort the connection and thus my complete proxmox setup crashes. I have installed the ssds normally and direct on the sata ports in the server where proxmox...

moin, ich habe eigentlich schon viel länger vor, meinen Host mit einem fx8320 durch etwas neueres abzulösen. Da mir allerdings immer wieder etwas dazwischen gekommen ist, ich jetzt aber noch einen i5 6600k hier rumliegen habe, dachte ich mir, ich benutze vielleicht einfach den und spar mir das...

Hallo! Wir haben einen Ceph-Cluster mit 2 Pools ( SSDs und NVMe's ). In einem Rados benchmark Test ist wie zu erwarten der NVME Pool viel schneller als der SSD Pool . NVMe Pool: Schreiben: BW 900 MB/s IOPS: 220 Lesen: BW 1400 MB/s IOPS: 350 SSD Pool: Schreiben: BW 190 MB/s IOPS: 50...

My main Proxmox disc (where Proxmox is installed) consist of 2 SSD which i configured as a mirror in Proxmox. I want to change these 2 discs with 2 bigger ones but i don't want to ruin my Proxmox installation. The first 2 disc has a capacity of 120GB. I want to change them for disc with a...

How important is it to turn on the "Discard" option for VMs when using an SSD drive for storage? - Eric

Hello! Title says it all, but here a details: Host: Proxmox VE 6.3-6 Guest: Ubuntu Server 18.04.2 LTS SSD: ADATA XPG SX8200 Pro 2 TB (two in ZFS mirror) ZVOL: 90GB, thin-provised, sync=disabled Then i benchmarking this ZVOL directly on the Host i get almost maximum performance that this SSD...

Hi guys, I recently bought a server on which I run Proxmox for virtualization. First I installed Proxmox directly on my 1TB SSD, but then realized that I was losing almost 100GB for the "local" partition, but I wanted to use the fast SSD storage for the "local-lvm", i.e. the VMs themselves...

Hi zusammen, seit heute habe ich nach Empfehlung einiger Personen Proxmox auf meinem kleinen Heimserver laufen. Es handelt sich um einen Intel NUC 8 mit Core i5, 16GB RAM und einer 1TB WD Black M.2 SSD. Bisher habe ich immer Linux direkt darauf installiert und alle Dienste auf demselben...

I have 3 machines actually with 2 m.2 NVME disks (256GB) and 2 internals SSD medium endurance (480GB). I have for now installed the system on a raid1 on m.2 disks. I am looking to optmize this installation. Is there anything I could do with such install?

I am running proxmox on a Dell R210 II, which I recently upgraded to use four Kingston A400 SSDs running in RAID 10 using the H200 RAID controller. After this machine ran for a few hours, it encountered an error and fell back into a read-only root filesystem (I've seen some answers that suggest...

Hello, I'm trying to replace HDD to SSD. As my understanding, I let a target osd out and wait to become HEALTH_OK and destroy it to remove the current HDD physically. but after the osd out operation , HEALTH_WARN never ends. How can I fix it? My version is Virtual Environment 5.4-15 Satoshi

I acquired a Tiny/Mini/Micro PC to be my starter homelab, nothing fancy just a 4-core i5 from 2012 and 16gb non-ecc ddr3 with a 1TB SATA SSD (The SSD cost almost as much as the PC itself). Goal is for this to be various things including PiHole, backup of other devices, log collection and...

Hi, Im new to Proxmox. I've read alot about the possibilites with ZFS and SSD caching with Proxmox. I would like to get some advice/configuration tips/howto about the following: Server 1: 1x SSD 120GB (/dev/sda) using dedicated for Proxmox installation to run and containing some iso files...

Please help me figure out, what's wrong. I have a SSD with 220GB parition (created on this way: "Last sector, +sectors or +size{K,M,G,T,P} (4096-784932712, default 784932712): +220G"), formatted as Linux LVM. I have a volume group, including only this SSD, no more. I have a storage with 220GB...

Hallo liebes Proxmox Forum! Meine Konfiguration: - Ryzen 7 1700X (8C/16T) - 32GB 3000MHz CL16 DDR4 - 2x 4TB SMR 5400RPM HDD (zfs mirror) - (bald) 2x 1TB Crucial MX500 TBW 360TB 95K IOPS (zfs mirror) - 750W Marken Netzteil Ich frage mich aktuell ob es ein tool gibt um zu sehen wieviel ich auf...

Hey everyone thanks for the quick help. I have my current host on an r610 with the perc6i doing the raids. I have a raid1 boot with 2x 120gb ssds. And a raid 1 3x 500gb hdds, and another single 500gb hdd. However, i now want to do it right and get an HBA and finally have smart info. My plan is...

Hi i’m new add proxmox. I have a nuci5 with a 500 gb ssd disk and will install proxmox on the ssd disk. But how can i set that i use 100 gb of that disk for the proxmox and the rest for vm storage?

Hi guys, although my server configuration is very "homy" I have a questions regarding SSD. Yes, it's a consumer SSD, we're a small company in Argentina, USD dollars scarce here, we buy the stuff we can afford. The thing is that my disk have the "wear out" parameter in 10%, which means the SSD...

Hello, I am preparing to order hardware for a 3-node hyper-converged cluster. I won't bore you with exact configuration details but I would be thankful for some general advice on this point. To optimise performance with a limited budget (all SSD storage is not an option) i have read that it...