ssd

Hi, I installed Proxmox 7, and I am trying to create a new ZFS using two 1TB NVME drives via the GUI. However, I get the below error: command '/sbin/zpool create -o 'ashift=12' nvme mirror /dev/disk/by-id/nvme-Sabrent_1765071310FD00048263...

Hallo, dank einem Beitrag habe auf eine Frage von mir habe ich nun meinen Server auf ZFS umgestellt. Nun stellt sich mir die Frage: XFS oder ext4 als Gast FS? Bisher war ich immer ein Freund von XFS: - defrag online möglich (auch unter Linux relevant; ggf. weniger/gar nicht bei SSD?) - stabil...

Hi, I am currently switching to a new personal home server, using Proxmox VE, v7, with several VMs/CTs in the future. Hardware: Barebone, 16GB RAM, and one 2TB SSD (and no other drives). This is how the disk looks like: root@pve:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE...

Hallo liebes Proxmox Forum. Ich würde gerne meine 2x 1TB SATA SSD in einem "RAID0" als mirror mit meiner 1x 2TB NVME SSD in einem mirror Verbinden. So das ich 2TB SSD Speicher habe. So das entweder die NVME oder eine der SATA SSDs kaputt gehen kann. Vielen dank schon mal für die Info.

So, I'm trying to plan out a new Proxmox server (or two) using a bunch of spare parts that are lying around. Whether I go with a single or two Proxmox servers (it's deciding whether or not to have an Internal server, for Media, Backups, Git/Jenkins, and a separate External Server for Web, DBs...

I have recently installed four NVMe SSDs in a Proxmox 6 server as a RAIDZ array, only to discover that according to the web interface two of the drives exhibit huge wearout only after a few weeks of use: Since these are among the highest endurance consumer SSDs with 1665 TBW warranty for a...

Hi there, i am about to make my first server and i will use it for production use / website hosting. I have decided to buy either Dell R630 or Dell R730. So about the drives i am thinking to use an nvme card with 2 Samsung 970 Pro in raid1. All VMs will live in the nvme’s and i will add at...

Hello Proxmox Forum, I have since I installed proxmox permanently problems that after x amount of days apparently my ssds are offline or abort the connection and thus my complete proxmox setup crashes. I have installed the ssds normally and direct on the sata ports in the server where proxmox...

moin, ich habe eigentlich schon viel länger vor, meinen Host mit einem fx8320 durch etwas neueres abzulösen. Da mir allerdings immer wieder etwas dazwischen gekommen ist, ich jetzt aber noch einen i5 6600k hier rumliegen habe, dachte ich mir, ich benutze vielleicht einfach den und spar mir das...

Hallo! Wir haben einen Ceph-Cluster mit 2 Pools ( SSDs und NVMe's ). In einem Rados benchmark Test ist wie zu erwarten der NVME Pool viel schneller als der SSD Pool . NVMe Pool: Schreiben: BW 900 MB/s IOPS: 220 Lesen: BW 1400 MB/s IOPS: 350 SSD Pool: Schreiben: BW 190 MB/s IOPS: 50...

My main Proxmox disc (where Proxmox is installed) consist of 2 SSD which i configured as a mirror in Proxmox. I want to change these 2 discs with 2 bigger ones but i don't want to ruin my Proxmox installation. The first 2 disc has a capacity of 120GB. I want to change them for disc with a...

How important is it to turn on the "Discard" option for VMs when using an SSD drive for storage? - Eric

Hello! Title says it all, but here a details: Host: Proxmox VE 6.3-6 Guest: Ubuntu Server 18.04.2 LTS SSD: ADATA XPG SX8200 Pro 2 TB (two in ZFS mirror) ZVOL: 90GB, thin-provised, sync=disabled Then i benchmarking this ZVOL directly on the Host i get almost maximum performance that this SSD...

Hi guys, I recently bought a server on which I run Proxmox for virtualization. First I installed Proxmox directly on my 1TB SSD, but then realized that I was losing almost 100GB for the "local" partition, but I wanted to use the fast SSD storage for the "local-lvm", i.e. the VMs themselves...

Hi zusammen, seit heute habe ich nach Empfehlung einiger Personen Proxmox auf meinem kleinen Heimserver laufen. Es handelt sich um einen Intel NUC 8 mit Core i5, 16GB RAM und einer 1TB WD Black M.2 SSD. Bisher habe ich immer Linux direkt darauf installiert und alle Dienste auf demselben...

I have 3 machines actually with 2 m.2 NVME disks (256GB) and 2 internals SSD medium endurance (480GB). I have for now installed the system on a raid1 on m.2 disks. I am looking to optmize this installation. Is there anything I could do with such install?

I am running proxmox on a Dell R210 II, which I recently upgraded to use four Kingston A400 SSDs running in RAID 10 using the H200 RAID controller. After this machine ran for a few hours, it encountered an error and fell back into a read-only root filesystem (I've seen some answers that suggest...

Hello, I'm trying to replace HDD to SSD. As my understanding, I let a target osd out and wait to become HEALTH_OK and destroy it to remove the current HDD physically. but after the osd out operation , HEALTH_WARN never ends. How can I fix it? My version is Virtual Environment 5.4-15 Satoshi

I acquired a Tiny/Mini/Micro PC to be my starter homelab, nothing fancy just a 4-core i5 from 2012 and 16gb non-ecc ddr3 with a 1TB SATA SSD (The SSD cost almost as much as the PC itself). Goal is for this to be various things including PiHole, backup of other devices, log collection and...

Hi, Im new to Proxmox. I've read alot about the possibilites with ZFS and SSD caching with Proxmox. I would like to get some advice/configuration tips/howto about the following: Server 1: 1x SSD 120GB (/dev/sda) using dedicated for Proxmox installation to run and containing some iso files...