opnsense

After the prior post on FreeBSD (OPNSense and FreeNAS) failing to boot due to hotplug being enabled there remain issues. Both install just fine and boot just fine. It is only after a while they become unresponsive. I have yet to find an indication or metric to watch to understand what is going...

I am virtualization Opnsense on Proxmox by passing through two ethernet ports as bridges to the guest VM. One port is configuered as WAN and the other an LAN. Everything is working as it should be. I have a second broadband connection that I want to incorporate as a failover, but no spare...

My Firewall has 5 Interfaces: 3 Interfaces for WAN (External IPs) 1 Interface for LAN (10.0.0.10) 1 Interface for DMZ (192.168.0.10) The OpenVPN Server is listening on tcp Port 443 and udp Port 1194 (WAN Interface) My proxmox Server hast two Interfaces: 1 Interface for LAN (10.0.0.3) 1...

Hello, I have an OPNsense VM running with a dedicated WAN interface (vmbr1) and the default Proxmox Linux bridge (vmbr0) for LAN. I'm trying to segregate my network like so: WAN -> My public IP VLAN 100 -> 10.10.100.0 LAN -> 10.10.1.0 I only have 2 NICs and I am trying to pass the VLAN using...

I have a proxmox setup with 4 nics. 1 is currently the management interface. ( connected to enp2s0f0 ) 2 are bonded to a vmbr = LAN, ( connected to ens1 and ens2 ) 1 vmbr = WAN, ( connected to enp2s0f1, which is connected into my homenetwork for now, later on will become dmz. ( 129.168.178.x )...

by P.Steinberg WHY I DID THIS: Because in opnsense / FreeBSD Passthrough of USB3 ax88179_178a was a pain. Either only 100Mbit or not working at all. Figured out it must be a driver problem in PVE in connection with FreeBSD. THIS MOD works like the old driver in any Linux , but now also very...

Hello, I have a bare metal server at OVH with several FO IPs. I'm trying to change my current configuration of Proxmox to the following: - PVE admin : 1.2.3.4 - OPNsense : 4.5.6.7 - VM1 : 4.5.6.8 - VM2 : 4.5.6.9 I also want to have a private LAN for the VMs and set up a VPN for administration...

Hallo, wir betreiben auf einer Hardware mit 2 physischen NIC Karten proxmox v6.0-11 mit statischer IP Adresse als single node mit ZFS Storage, auf dieser läuft unter anderem OPNsense 19.7 als KVM. NIC Karte 1 = eno1 --> hier wurde eine Linux Bridge erstellt vmbr0 für LAN, (Default Netzwerk ID1)...

Internet <---> host eno0 <---> vmbr0 <---> pfSense VM <---> vmbr1 <---> VM-A, B, C, ... Hello I am new to proxmox because I always worked with hyper-v but due to several differentials that I saw in proxmox I would like to adopt it. However due to a huge difficulty that I am encountering I...

Greetings Forum: I'm new to PROXMOX. I have been experimenting with PROXMOX on a Dell R720xd, a H710 HBA flashed to IT mode, an internal PMR79 Dual SD Card module to store the OS, numerous 3TiB SAS drives, and 128GiB of ECC RAM. I run one QNAP NAS box for file storage, a media server (Plex...

Ì'm having some issues with macspoofing on Proxmox as my CARP Master/Backup VIP's are flapping in state between the servers and stay that way they are set. I have checked: Disable hardware checksum offload Disable hardware TCP segmentation offload Disable hardware large receive offload...

Hallo Zusammen Ich stehe auf dem Schlauch (oder stelle mich wohl zu dämlich an): Folgendes Szenario habe ich: Proxmox Server mit 2 NICs, mittels VLAN getrenntes Subnetz von der OPNsense FW (die läuft als Box separat, nicht auf dem Server und stellt auch für dieses Subnetz den DHCP Server zur...

Hello, Since our firewall change to opnsense the DNSBLs doesn't work. On opnsense we use unbound DNS as resolver. Where are the log-files for the DNSBL on the Proxmox Mail Gateway? Best regards PizzaTime

Hi guys ! i had a proxmox server with Ip failover 10.x.x.26 (example)and a mac address 56:65:34:54:E5:F0 2 interfaces on proxmox : On Lan enp0s20f1 And One Wan enp0s20f2(ip failover) and bridge : VMBR1, VMBR2 so i créate 2 interfaces on my VM opnsense FW one virt bridged on VMBR1 where i...

Hi, I am running OPNsense in Proxmox and I would like to get the balloon driver working properly so I can get correct memory readings in Proxmox. Right now for example Proxmox reports 3.35GB/4GB while OPNsense itself reports only 740MB is used. I have searched a lot online and found some...

Hi all, I've read that nic pass-though is the most secure way to virtualize a router/firewall. I followed this guide on the great proxmox wiki and was able to pass-thought a 4 port intel nic to a vm running opnsense (dell v pro 1000). It all works - in fact I'm typing up this post "through" the...