Hi,
I added NFS with the GUI and it works, if I switch off or restart or unplug/plug again the network cable of the NAS , proxmox (4.4.19-1-pve) is not able to remount automatically the NFS and I need to do manually .
So I get this messagge on the log :
mount.nfs: Stale file handle
or the gui...
Hello,
For remember : https://forum.proxmox.com/threads/proxmox4-lxc-bind-mounts-read-only.25995/
The option "ro" on lxc mount it's ready, now update the documentation (https://pve.proxmox.com/wiki/LXC_Bind_Mounts) for support option (ro=1)
Exemple : mp0:/host-target,mp=/guest-target,ro=1
Thanx
I'm experiencing the following problem.
Node1 - normal node, uses NFS storage for VM images
Node2 - has the NFS storage as local disks, one is a ZFS array, the other is an fstab ext4 disk
Shutting down Node1 while Node2 is running works fine. System powers off.
Shutting down Node2 waits for 90...
After looking around for suitable answers to this particular question I decided to put some of the advice to the test and figure out what the procedure would be in the event my boot drive (ssd) decided to pack it in.
General consensus online and on these forums state that by simply backing up...
Is there a way to mount zfs directories recursively?
It currently does not mount nested ZFS datasets, only the parent dataset, and the manual doesn't have that option
https://pve.proxmox.com/wiki/LXC_Bind_Mounts
pct set 100 -mp0 mp=/target,/target/test
Hi, there!
I am Cristina. I have a Linux LVM(1.7T) with RAID5. Now I want to mount a ssd(SATA) to one of my pve node(VM ID=700).
----------------------------
Device Start End Sectors Size Type
/dev/sda1 34 2047 2014 1007K BIOS boot
/dev/sda2 2048...
I understand the way to get the entire Proxmox server working on an encrypted host is to build a Debian encrypted system using LUKS and then manually pull down proxmox. My question is how do folks get this to securely and automatically mount so you don't need to manually enter the password each...
Hi Everyone,
My LXC Container have 1000 GB but I only need 150 GB. How can I shrink the storage?
I used this pct resize 101 rootfs 150
unable to shrink disk size
Can anyone explain me how can I shrink the LXC Container to only 150 GB.
Best regards and thanks for help,
Oliver
Hello,
It this possible to create a mount between the host and a guest by editing the lxc configuration file.
cat "mp0: /srv/directory,mp=/srv/directory" >> /etc/pve/lxc/<id>.conf
it seems to be called a bind mount reading the page https://pve.proxmox.com/wiki/LXC_Bind_Mounts
Since 4.2 it is...
Hi,
I would like to change some settings in some /etc/pve/* files on my physical Proxmox hosts but I'm not able to create or modify files in this directory :
# touch /etc/pve/test.file
touch: impossible de faire un touch « /etc/pve/test.file »: Périphérique ou ressource occupé
# mount | grep...
Hi There
Thanks for any help in advance, I am trying to setup a backup pool in a Proxmox 4.1 cluster (all hypervisors are running 4.1), when I create the pool I set the only content to be VZDump backup file (even though I am using Vms rather than CTs) and when I try and run a backup I get...
Hi everyone,
I am running several Proxmox 2 and 3 hosts and a Proxmox 4 host.
All of them declare a local storage and 2 nfs storages in /etc/pve/storage.cfg like this :
# cat /etc/pve/storage.cfg
nfs: share-online
path /mnt/pve/share-online
server server1.domain.com
export /srv/vzshare...
Hello,
In Proxmox 4, they are two method to mount a directory in a container "lxc.mount.entry" and "mpX" (https://pve.proxmox.com/wiki/LXC_Bind_Mounts).
My problem :
-mpX : Method doesn't support read only.
-lxc.mount.entry : Method can only be used one time and it's doesn't recommanded option...
Hi All,
I'm currently evaluating ProxMox and love what I see so far.
I've got a couple of questions though.
Am I correct in my understanding that Ceph cannot be mounted like a normal drive or NFS? It can't be RSYNC'd to and from directly from a host node? (Why would I want to? I like the...
I am currently testing the installation on a DELL t-630 server. PVE is installed with root-ZFS on SD card modules (16gb size, dual-cards, hardware mirrored). I am trying to move the /var folder to another ZFS file system with regular sas hdds.
The root is on rpool on the SDcard.
var is on...
Hi.
I've several machines with proxmox.
Latest installed with 4.1-4 has a problem: not mount NFS storage for backups.
cat /etc/pve/storage.cfg
...
nfs: backup
path /mnt/pve/backup
export /srv/backup/pro11
server 5.XX.XX.XX
options vers=3
maxfiles 3
content backup
This work fine...
Hi!
i read some years this forum, but register only for subscribe my problem =(
search on google and forum - do not help
i try reinstall - but problem goin again
i setup proxmox in test usage on usb flash drive over clean debian 8.2 setup by manual on wiki...
Hi,
I want to mount qcow2 image file, but get this error:
mount: you must specify the filesystem type
I follow the steps provided in Debian Wiki:
modprobe nbd
qemu-nbd --connect=/dev/nbd0 imagename.qcow2
The image is loaded correctly, but I cannot mount it.
fdisk -l /dev/nbd0
WARNING: GPT...
Hi
I've installed Proxmox 4.1 with 2 disks in a ZFS mirror configuration.
After rebooting the server Proxmox can't mount the pool 'rpool'.
I tried to mount the pool with 'zpool -R /root -N rpool ' as said in the displayed hint and 'zpool import'.
Both give me the that the 'pool is not found' or...
How i mount lvm disk used by VM on host machine, so i can copy files.
I have some network issue in the VM, can't get eth0 working. The VM use LVM disk image.
root@server1:~# parted /dev/pve/vm-104-disk-1 print
Model: Linux device-mapper (linear) (dm)
Disk /dev/dm-5: 34.4GB
Sector size...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.