Hi.
I was trying to change the hostname, by editing /etc/hostname and /etc/hosts following the guide from the wiki.
It didn't work as I found 2 different nodes into the Web UI, then I moved all the content from the old node folder in /etc/pve/nodes to the new one (this includes lxc, qemu-server...
I recently got a great deal on a used Dell OptiPlex 7040 SFF that I plan to run PVE 6.3 on. The system has a single M.2 NVME slot and only uses a single SATA power cable coming from the motherboard that splits out to a standard sized SATA power and a slimline SATA power that connects to the...
Hey Guys I am really new to proxmox.
And trying to figure all out.
My plan is to install some lxc on my Intel nuc for my home needs.
I've got a Intel nuc with 2x 250GB SSD inside.
How do I get the most of it ?
Ext4 will use only one disk?
Xfs with raid 0 ? (I know if one disk fail all is...
Preface: I am not a linux/unix guru, but I can figure things out and googlefoo for the most part... I've only added the components of my network that are valid for this post.
Configuration:
*Server 00
2x Xeon E5-2678V3, 256GB ram, Intel 540-T2 10 GbE, Intel I350 2x 1GbE and onboard 540-T2 GbE...
Hi all,
Extremely new to proxmox and have never really used Linux before.
I've got two physical machines that I've put together in a cluster, although when configuring them I've accidentally put one on ZFS storage and one to whatever the default is.
I've been able to setup vms on my server...
So I have 3 separate Proxmox hosts in a cluster that I'm trying to get communicating together on a separate network. Each host has the main NIC, and a dual-NIC add-in card. Using the dual interface cards, each host is directly connected via one port to the other two hosts. I've been searching...
SOLVED:
Forgot to set default gateway in container settings. It didn't carry over from vmbridge.
I'm new to this forum and PVE, sorry if this is in the wrong place. I noticed the problem when trying to download java from default repo and it wasn't connecting to archive.ubuntu.com and I also...
Like the title, i cannot access the web gui with the given (https ip 8006) to gain the password to login in the command prompt. i am booting from a bootable usb with balena. i tried it on all 3 different web browser in the same network but failed. During the installation process, i am required...
Hello guys, I decided to open this thread because I'm not finding a good solution to my problem.
First of all, I have installed proxmox VE 6.2 on a dedicated server of Hetzner trought installimage (Debian Buster) .
I have
1 dedicated ip ( 144.76.195.169 )
and a subnet /29 with 8 ips
What is my...
Hello,
I have an OPNsense VM running with a dedicated WAN interface (vmbr1) and the default Proxmox Linux bridge (vmbr0) for LAN. I'm trying to segregate my network like so:
WAN -> My public IP
VLAN 100 -> 10.10.100.0
LAN -> 10.10.1.0
I only have 2 NICs and I am trying to pass the VLAN using...
Good morning all,
I am posting here because there is something that I have never seen and that I cannot understand. I have a VM with an 800 GB virtual disk, however, when I make a "df -h" in the Vm, there is 800 GB available but only 265 GB used. But when I make a backup of this VM or I do a...
Hallo,
ich habe gerade einen Proxmox Server installiert.
Ich kann über das Webinterface nicht auf dessen Konsole zugreifen.
Fehler:
timed out waiting for client
TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/Proxmox --perm Sys.Console -- /bin/login -f root' failed: exit code 4...
I have a proxmox setup with 4 nics.
1 is currently the management interface. ( connected to enp2s0f0 )
2 are bonded to a vmbr = LAN, ( connected to ens1 and ens2 )
1 vmbr = WAN, ( connected to enp2s0f1, which is connected into my homenetwork for now, later on will become dmz. ( 129.168.178.x )...
The same problem occurred during the previous upgrade of 5.3.13-2. After reducing the pve of the two pass-through node machines to 5.3.13-1, the database speed in the VM returned to normal.
After upgrading to 5.3.18-1 this time, I have reduced the kernel to 5.3.13-1. The problem remains...
To preface this I am very new to Proxmox and I don't have a lot of Linux knowledge :confused:
I have been using Proxmox without issue since late last year with standard 1Gb networking from my freeNAS box. I bought a pair of these cards after seeing that some folks had been using SolarFlare...
Hello,
I am trying to setup Plex on a CentOS 8 VM in Proxmox. If I SSH into the server and go onto localhost I can view that the server is up and have already had files play perfectly. The problem occurs when I am using the native app. I was asking for this on the Plex forum, but they say that...
Hello everyone. I am a bit new to the Proxmox community so please pardon me should I miss something regarding forum or community etiquette/decorum.
A Proxmox Cluster setup I have been charged with supporting has developed a strange and unexplained issue that I have been unable to find a...
Hello,
I am pretty new here, not sure if this is the proper way to ask for support, I am trying to install Proxmox VE on a pretty old but decent machine.
i5-4440
8 DDR3 ram
mobo:GA-H97N-WIFI
right after the installation finishes and my pc reboot, I am taken to this error screen
Anyone has...
I dont have any internet on my VM at all.
If someone gonna ask for like configs etc give the command line too
Brand new to the OS and ned to linux. ofc i know some basic stuff but it depends on what i need to do.
Hallo zusammen,
ich habe 3 Node Cluster mit je 3 OSD in jedem dieser Nodes.
Meine Ceph Version ist: 14.2.1 (9257126ffb439de1652793b3e29f4c0b97a47b47) nautilus (stable).
Der Pool hat Replica 3/2 mit 128pg. Sobald ich eine VM aus einem Backup, das auf einem NFS Share liegt, herstelle zeigt der...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.