hdd

Hi guys, I am absolutely new to Proxmox and also have never installed/configured a virtualisation server for hosting several VMs. So, I heard and thought, Proxmox seems a good idea for that, especially, as I like Debian a lot. The system will be: Ryzen 7 3700X, 32 GB RAM, Gigabyte Mainboard, 1...

Hallo Zusammen, Wir haben ein Problem beim Migrieren einer VM vom einen Node auf den anderen. Die zu transferierende VM hat 2 Festplatten eingebunden. Eine im local-lvm und eine auf einem Remote Synology Server. Dieser Synology Server ist bei beiden Nodes über NFS unter demselben namen...

Hello, I installed the latest version of proxmox ve. All is ok. I created a first vm kmv (ubuntu srv) I selected HDD 40GB but, the file created is less than 40GB. I understand the virtual HDD will grow up with what I will fill. But, I would like provisioning this size on the host HDD. How can I...

Hi, I have a Proxmox server (5.2.1) with the config below : - Xeon E5 2650 V2 - 16Gb Ram ECC - 120 GB SSD (KINGSTON SV300S3) - 2x2To HDD (Hitachi HUS72403 and TOSHIBA DT01ACA3) The proxmox server is intalled on the SSD, the containers too. My two hard-drives are configured in RAID 1 with this...

Hallo, ich habe mich jetzt seit 3 Tragen in Proxmox eingearbeitet. Ich habe noch einen alten Tower hier rumliegen und habe mich dazu entschieden, mich in das Thema Proxmox einzuarbeiten. Im Moment laufen auch zwei VM's (Win7 und DebianStretch). Ich möchte nun ein Festplatte welche als NTFS...

I can get a 4TB Skyhawk Surveillance grade HDD cheaper than its Ironwolf sibling, will this have a negative impact on my virtual environment? Seeing that their main difference is Skyhawk is designed for like, depending on who you ask, 75% write and 25% read or 90% write and 10% read while...

Hello there, I want to install Proxmox on three x3650s. I've tried to install the VE 5.3, but it has Problems to mount the drives (6x300 GB 10k rpm SAS). I know that Proxmox want to configure the RAID on its own, so you have to turn off the RAID-Controller on "normal PCs". But in this case I...

Right now Im using proxmox on single intel nuc with wd red hdd. Fine. Im thinking about install proxmox to SSD hdd and running all vm from usb 3.0 wd red hdd. is it possible?

Hallo zusammen, ich habe aktuell folgendes Festplatten-Setup: 2 x 2,5TB HDD Da ich einige VMs habe, die mir leider zu langsam laufen, würde ich mir bei meinem Hoster eine 500GB SSD einbauen lassen. Würde es sich lohnen, das komplette Hostsystem auf die neue SSD zu legen oder kann ich Proxmox...

Good afternoon, colleagues! I have a problem with the implementation of Ceph storage. My configuration: There is a Supermicro Superblade chassis, which has 20 physical servers. Each server has 2 processors, 64 GB of RAM, 1xSDD 32GB for OS, 1xSSD and 1xHDD for Ceph There is a desire to collect...

I have a small server with little RAM (not enough for ZFS) and with two disks. One 256GB SSD and another 4TB HDD. I installed proxmox on the SSD. NAME MAJ: MIN RM SIZE RO TYPE MOUNTPOINT sda 8: 0 0 232.9G 0 disk ├─sda1 8: 1 0 1M 0 part ├─sda2 8: 2 0 256M 0 part / boot / efi └─sda3 8: 3 0...

Hello, I have a cluster with 3 PCs, each having 3 osd's. It works great so far, but over time (after a few hours / days) the osd's start to go down. The cluster has been in use for about 4 weeks and roughly I lose one osd per day. After it's down it cannot be restarted via ceph commands. Even...

Hello together, i am running a Debian Jessie Server with two 2 TB HDDs. So far my containers are on ADA and i struggle getting my second HDD mounted to proxmox. Is it even possible to move already created VMs to another HDD ? Thanks

Hallo zusammen, versuche schon den halben Tag eine HDD bzw. deren Partition sdb1 in einen Container durchzureichen. Und zwar handelt es sich beim Container um den TurnkeyMediaserver und auf der Platte befinden sich lediglich Filme und Serien. Alle meine Versuche die /var/lib/lxc/xxx/config zu...

Hello everyone, I came across this error on one of my Proxmox installations and although replacing the bad HDD would more than likely fix the problem I was concerned that the output of zpool status -v is saying the failed disk was the same device name as the online disk. Shouldn't the device...

Hallo Leute, ich bin im bereich Proxmox neu und versuche mich zuwar viel selber einzulesen und zu probieren aber nun muss ich euch leider mal mit ein paar fragen nerven. Mein Plan ist Proxmox auf einer 120GB SSD laufen zu lassen und dann weitere HDD's als Raid usw. hinzuzufügen. Aber jetzt mal...

Hello, I've got an Archival HDD installed in my system, additionally to a RAID Z-1 out of 4x 500 GB SSDs. The only issue is that the Archival HDD keeps getting waken up by pvestatd, when stopping the service it usally stays in sleep mode. Any ideas how to fix this issue? spyfly

Hi Our Server has 4 no's of 10TB HDD and with RAID1 so 2 drives My question is about creating the Storage for the VMs, i have installed Proxmox in drive 1, which has local and local-lvm storage where local is given 100GB and 9.9TB for the local-lvm, where we keep VM's right now. i need to add...

Hello Tom! I have a big problem. A partition was removed from a VM. I restored it but i cannot seem to mount it back to the VM? How do i do that, i only get "thats not a mount point" I tried Mount /dev/pve/vm-105-disk-1 /105 Mount /dev/pve/vm-105-disk-1 /XXXXXXX6(machine name) Mount...

Hi Guys, I have an HP ML10v2 which i want to use as an all in one server (hypervisor, fileserver, LXC). I have installed Proxmox (choose ZFS RAID 0 during install) on the internal HDD 500GB 7200RPM seagate. after that i installed samba and did the following: zfs sharesmb=yes rpool/DATA While...