hdd

Hello, My servers with Proxmox-ve 6.2-1 not see all hdd's (8x hdd) but only 4 or 5 disks? In my last installed version Proxmox-ve_6.0-1 I saw all disks and datasore. Where is the problem now? root@pve208:~# pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created. root@pve208:~#...

Hello, today I restarted my server and get an error message on my zfs hdd. I dont know whats the reason, but today i changed 2 settings. I changed the IP, therefore I restarted the server and I executed the following commands: apt-get install zfs-fuse /etc/init.d/zfs-fuse start zfs-fuse import...

https://pve.proxmox.com/wiki/Linux_Container#pct_settings a bit down on "Mount Points" Hmmm..... könnte Ihr mir das mal übersetzen :) Ich möchte meine Window 10 VMs in Rente schicken, bei mir liegen die Serien und Filme alle auf NTFS HDDs und diese habe ich mit folgenden Befehl an die VM...

Hi everyone ! I made a fresh Proxmox install yesterday. The system is installed on a SSD, no issue here. After that i created a mirrored Zpool (Raid1) with 2x 1To HDD (a Toshiba and a brand new WD). When creating the zpool, it failed and the error ata6: COMRESET failed (errno=-16) appears. The...

When trying to patch a kernel an error message always comes up saying root partition is out of space. Is there a way to safely recover space by clearing any unneeded files? Up until now I have always deleted the default lvm and extended the root partition but I’m wondering if there is a more...

Hey! So I have a MegaRAID controller in my server, and I have several disks attached. All of them configured to its individual RAID0. I used this command: -CfgEachDskRaid0 -aAll After that, I used this link to passthrough my HDD to my Lubuntu kvm. However, I cannot mount the HDD, I get the...

So I'm trying to mount two old HDD's which used to sit in my old Proxmox v3 node so I can extract some files that one VM had on it. The first HDD went fine, I used # kpartx -a /dev/MediaAux/vm-210-disk-1 to map it then I did # mount /dev/mapper/MediaAux-vm--210--disk--1p1 /mnt/oldnfs/ to mount...

So my purple western digital 2TB hard drive decided to die last week good thing I was able to still recover the data because I converted the thin volume(1.7TB of it) as an ext4 partition where I can store all my files, and the root fs took only less than 100GB where the boot partition resides ...

Hello, I'm trying out cloudinit to deploy our VMs and so far everything is working fine. I've followed the tutorial in the doc to create the template which worked fine. The template had a 3GB HDD (scsi0). I wanted to extend the disk of another VM and by accident I extended the disk of the...

Perhaps this is already old or known news for several people but I thought I should share this news, as I now that many people are using WD Red drives for data storage in Proxmox. I also know that it's mostly related to the consumer line, but still. As mentioned in the bug report from...

Hello, So I was testing with disk passthrough with my 60tb raid 5 storage on dell 720 server and turns I can pass through the same disk on multiple vms at the same time! I can do r/w on both vms at the same time. I mean is it normal? I tried searching on google but couldn't find any similar...

Hi everyone, On my home server I'm trying to pass through a SATA HDD to a VM (Debian/Openmediavault) via a cheap 2-port PCIe SATA controller (ASM1062). I followed the PCI passthrough instructions on the wiki (https://pve.proxmox.com/wiki/Pci_passthrough). Now every time I start up the VM with...

Hi guys, I have installed Proxmox on my dell 720xd and used an ssd drive for installation. Now I have 12*6tb drive on my server and already setup hardware raid5 now how do I use the HDD on Proxmox? I want to create a KVM VM which will be used to host big files such as videos. I tried making the...

Hello, fellow proxmox users, this is my first thread. I hope you guys are doing well in this pandemic. So I bought this Dell 720xd 2u 72tb+320gb server last month and decided to configure this week and chosen proxmox. I configured everything and added the raid 5 storage to the proxmox. Now I...

I recently added a VM that mounts a hard drive, and then has all of my home media services running (Deluge downloading and seeding, Sonarr and Radarr for library management and SMB server for network access to the hard drive). After adding this my host started crashing randomly and pretty often...

Hallo, ich bin absolut neu in diesem Thema und frage mich wie ich mein RAID am besten löse. Ich habe in einigen Videos gesehen das man bei mit Proxmox selbst ein RAID aus den verschiedenen Platten erstellen kann. Jetzt meine Frage: Ist es sinnvoll das RAID über Proxmox zu machen, oder soll...

I'm fairly new to proxmox and linux partitions/volumes in general, so there probably is a very simple solution to this that I am missing. My server has 1x 250GB SSD and 1x 1T HDD. I installed proxmox on the SDD and I'm guessing during installation it created following: LV...

I have a 5 node cluster, each node has 250GB NVMe drives which is fine for everything I do so far. I have a single CIFS for ISOs and backups. So far this all seems to work well for me. I now want to add a Shinobi.video VM to one of the nodes (IP camera recording software). That node happens to...

Hi, i have right now old two 500gb HDDs (raid 1 setup) and i think later to replace then with two or three ssd as raid 1 also. How i can do it, for system is understand that replaced one for system to mirror and not as a free memory.

Hello, I'm new to proxmox and virtualization in general. Currently i have two containers running one of which I'd like to use as a NAS with ZFS and RAIDZ5. However I have run into a problem with disks. At first I assumed I should just try to pass the physical drives to the Nas Container for...