I want to move Proxmox Virtual Environment 5.4-13 from a hard disk to a slightly larger SSD.
I tried booting into a live cd and using dd to copy the entire disk / block device to the other disk.
dd if=/dev/sda of=/dev/sdb bs=64M
This seems to work okay. All the partitions enumerate correctly...
New to Linux so forgive my ignorance about anything. Hoping to switch off of HyperV. I setup a single 120GB SSD non-UEFI computer with the storage defaults (Not ZFS). I customized a great many things and then used a HDD duplicator to clone to a 250GB destination disk. To my surprise the cloned...
Hello everyone,
After a power outage, my home Proxmox 5.2 server won't boot anymore. I end up in GRUB rescue saying :
As I asked my good friend Google, I tried different things, here in order :
1) On GRUB rescue, using "insmod zfs", that brings up the same error.
2) Booting from a Proxmox...
I am running version 6.1-7 on a 2+1 node setup. After I ran updates on both nodes, it gave me a message that a new kernel was installed so I rebooted one server after migrating the active VMs to the other.
I waited a little over 10 minutes for the server to come back up and nothing. I...
Guten Abend,
Ich habe mir am Gestrigen Morgen drei mal einen ProxMox install USB-Stick erstellt.
Doch bei jedem mal, wenn ich in den installer booten möchte, werde ich in den GRUB RESCUE-Mode versetzt
und mir folgendes angezeigt :
00...
I have recently installed PVE 6 on a HP proliant DL360e Gen8, 2 Drives with a ZFS pool. Multiple reboots worked fine and the server would restart correctly then I upgraded it to 6.1 after the upgrade the server would not boot - the error
"
error: no such device: (hex)
error: unknown...
I installed OS and Proxmox on ZFS raid1z on two USB sticks. Then I migrated them to two new SAS15K drive for more performance.
It's been working for one year and had many maintenance reboots. but this time it doesn't boot after a reboot and shows:
Trying to boot from USB DRIVE (C:\)
checksum...
I recently rebooted a proxmox 4.5 machine after having it running a rather long time and it is now stuck in grub rescue. It uses root on zfs.
error: no such device: c747d64b46956a22
error: unknown filesystem.
Entering rescue mode...
grub rescue> ls
(hd0) (hd0, gpt3) ... [all disks and...
Hello everyone,
It's been 5 days that I try to install Ubuntu 18.04.2 and it always fails; The installation itself goes well but when I remove the installation drive (iso image) and reboot it, the VM remains stuck at the boot from "HD drive" or at the " grub rescue";
I tried changing the...
Hallo Proxmox-Team,
ich habe ein Problem und hoffe, dass ihr mir helfen könnt. Ich habe proxmox
5.3-11 Linux PVE 4.15.18-10 64bit mit Software-Raid für einen Kunden auf einer HP-Workstation mit 2 x 4TB HDDs mit zwei laufenden Ubuntu-VMs installiert.
jetzt zeigt die Workstation beim Start an...
Hello,
I have been installing Proxmox for a week, after restarting Proxmox it remains stuck on the grub at startup, see screenshot added.
====================================================================
Error message : "error: checksum verification failed...
Dear gurus!
I am running a ML380 G9 server with SATA drives and Proxmox VE 5.1 and love the performance and reliability.
Recently we got a new HP DL380 G9 server with integrated HW RAID Smart Array P440 and 6 SAS 15k drives.
I want to move my setup to this more equipped server, but I am...
Hello!
About a month ago I've decided to give Proxmox-VE a try. The installation and the creation of a few test VMs went without hitches. Everything was working smooth (reboots also) until yesterday when I performed dist-upgrade to version 5.1.42. After the upgrade I had to reboot because of...
As @guletz stated at https://forum.proxmox.com/threads/crashes-with-zfs-root-and-stuck-on-grub-rescue-prompt.34172/page-2#post-168936, I am also getting only the grub boot prompt in a machine WITHOUT hw RAID with zfsroot running proxmox 4.4 which crashed without a reason.
grub > insmod zfs...
Hello!
I recently had 2 servers crash - both had been used in a PVE v3 cluster for a few years and never had an issue, but after a clean wipe and fresh install of PVE v4, both have experienced crashes, most likely under high I/O workloads. They have a HW RAID-6 with a ZFS raid-0 install as the...
I have a Proxmox system where I built:
1 Mirrored Vdev
1 Mirrored Vdev
1 Mirrored Vdev
1 Mirrored Vdev
With the OS installed across all of them, After an apt-get dist-upgrade, the system boots to a grub recovery screen.
Any clue what is wrong with it?
Hello,
after recent upgrade from GUI I can't boot the system (ZFS root on RAID1) anymore:
error: no such device: 1d54.....
error: unknown filesystem
Entering rescue mode
grub rescue>
Rebooting via install disk in rescue mode didn't help.
Rebooting via install disk in Install (Debug) mode...
Hello again,
after my first adventures with Proxmox, ZFS and Grub I can't start it again.
At boot I get the message:
error: not a directory
Entering rescure mode...
grub rescue>
I already boot with a live-cd to check if the pool is ok, and: It is ok!
If i type set I'll get the following...
Hey folks,
I installed Proxmox today (downloaded yesterday).
It was success full installed (ZFS) and created some vms. Everything was fine and reboot was all ok.
Then I performed an update (without any errors). After this reboot, the system does no longer boot. To be precise, the server boots...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.