gateway

Hello, today I've decide to update proxmox from 6.3 to 6.4 but i have discovered that one of my node can not access internet and can not ping the gateway. Ping result: ping 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. From 192.168.2.202 icmp_seq=1 Destination Host...

Hi everyone I'm trying to create a container with Ansible using proxmox API My LXC container network configuration looks like this when the container is created int /etc/pve/lxc/$vmid.conf : net0: name=eth0,bridge=vmbr0,gw=192.168.1.1,hwaddr=FA:6E:B3:F4:D6:61,ip=192.168.1.121/25,type=veth net1...

Hi there, We've been testing Proxmox Mail Gateway for a while and would like to promote them to production. We would like to change the hostname of the 2 Proxmox Mail Gateway nodes that conform the cluster. For non-clustered nodes we've found this...

Hi, I want to utilize IPs pointing to my server. Some of them are failover IPs, that are set to my server and can be redirected to other machines in case of dedicated machine failure. What I want to do is setting up IP address and gateway to my second Network Device, but I get default...

Hello, I have problems with pinging gateway from my two containers. It seems, that I changed something before, because it was working before from both machines. I am sorry, I am currently learning linux, so I need a little bit support. Proxmox network looks like this: vmbr0 is management...

I am currently having trouble setting up networking on my ubuntu server. The autoconfiguration by dhcp failed during installation, so I have to statically configure my network using netplan YAML files. I have two bridges setup, vmbr0, which is used by my main node, and vmbr1, which is used by...

It´s possible a bug in the network setting from proxmox to VMs with cloud-init and ubuntu. I have see many forum entries about the same problemas! The big problem is a wrong routing and only with a manual work arround the VMs will runs! That can been, that a routing with a gateway neer the same...

Hello, the vmbr0 is IP 192.168.100.* gateway 192.168.100.1 mask 255.255.255.0 i try to add vmbr1 using these ips( * bridge) try 192.168.101.* gateway 192.168.101.1 and try 10.10.10.10 gateway 10.10.10.1 but still get "Default gateway already exists on interface 'vmbr0'." so does there is bug as...

Hello, Since the last update, Proxmox Mail Gateway no longer boots up. When starting the server with the latest Linux available, 4.15.18-10-pve, the server will start and then freeze during the boot process. Console output attached. The server freezes here and becomes unresponsive. Starting the...

Ich hab schon mehrere threads zu dem Thema gefunden aber wußte nicht wo ich meine seltsame Beobachtung einbringen könnte die vielleicht zur Erhellung der verschiedenen beschriebenen Probleme beitragen könnte: Ich hab im Moment noch ein einfaches Cluster ohne extra Netz für die Synchronisation...

I would like to know if there is a way to only delete certain messages in a queue en mass. I have some messages building up in the queue but I don't necessarily want to delete them all, only the ones that I know are dead and will go no where. Is there anyway for me to granularly delete...

Hi there! I've installed successfully a fresh Proxmox (pve-manager: 5.2-9 kernel: 4.15.18-pve). I downloaded the ISO from the official website and installed it from a CD. THE PROBLEM: I'm not able to: Display the Admin-GUI via HTTPS <my-ip>:8006. (I get a "took too long to respond" message on...

Hello everyone !! I am in an end-of-career project. My project is about HA in virtualization, for this I chose PROXMOX. My project consists of the following: PROXMOX01 192.168.124.200/24 PROXMOX01 192.168.124.205/24 PROXMOX01 192.168.124.210/24 VM within Proxmox Zentyal. Although if the...

Dear Forum I have one VM running with vmbr0 (ip1, gw, eth1). I tried to add a second VM with vmbr1 (ip2, gw, eth1) but Proxmox says vmbr0 has already that Gateway (gw). How do I create the vmbr1 for the second VM ?

Hello, Here is what I am trying to do: Pfsense in front to handle all incomoing / outgoing traffic of my HA Cluster 3 Nodes in Cluster mode that will contains many VMs with different Vlans. Pfsense is NOT installed in the Proxmox Cluster, it is in separate physical machine. My Pfsense got...

Hello, I am new in the Proxmox World and I am trying to setup HA Cluster. I followed the documentation + some tutorials and I sucessfully install Proxmox in HA mode with Ceph Storage. I have : Prox1 4.4-1/eb2d6f1e with : - eth0 192.168.1.30 (for HA & internet access) - eth1...

Hey all, I'm pretty new to Proxmox and have a question possibly a little over my head, so please bear with me. Basically, I am using Proxmox to run a family of VM's and have them using ExpressVPN to connect to the internet via VPN. An ExpressVPN license gives me 4 simultaneous connections...

We have just about outgrown our dedicated server and need to purchase a larger one to accommodate our increasing VM growth. Rather than migrate from the old to the new server as this would require gateway changes which customers would not want to do - we have decided to add the second new server...

Brand new install of Proxmox VE 4.2 The issue is: unable to create new Linux/OVS Bridge, and throws error, "Default gateway already exists on interface 'vmbr0'" when the default gateways are _not_ the same. Existing gateway: 10.0.1.1 New bridge gateway: 10.240.0.1 How are they the same? Is it...

Hello! I have setup a network with 2 ISP, 2 gateways, 2 subnets (see attached graphic) on Proxmox VE host. ISP A is connected to Fritz!Box (router A), ISP B is connected to eth0 of Proxmox VE host (router B). Subnet A 192.168.178.0/24 with gateway 192.168.178.1 (= router A) is connected to...