Hi, I am fairly new to proxmox and servers in general. I was gaming on a Win 10 VM (w/ 3070 ti passthrough) when the server completely shut off. I turned it back on and was able to get back into the VM before the server turned off again after ~15 seconds. After another start I was shown the...
Hello. New to Proxmox and LXC in general, so this is probably just some stupid user issue but after updating from v6 to v7 I've found that with any container I create, there are strange errors getting their services up. So far tried debian-10-turnkey-zoneminder_16.1-1_amd64 and the default...
Hello all.
I am not new to virtualization, but I am new to proxmox. I am trying to build my first homelab on a Dell Poweredge r710. So far, I have a pfSense gateway router installed and working normally.
Here's the issue:
When I tried to create a Debian VM, it took a really long time to...
Leider bootet mein Proxmox seit einiger Zeit nicht mehr wirklich.
Das einzige was ich sehe, wenn ich mich mit einem Bildschirm direkt drauf schalte ist:
/dev/mapper/pve-root: clean files ****/***** blocks ****/*****
Auch nach 30min warten passiert nichts.
Hat jemand eine Idee wie ich das lösen...
Hi,
New to proxmox and trying to run VE on an old Dell Inspiron tower.
Having basically spent 3 days turning the machine off and on again I've finally been able to get proxmox to boot.
It will only boot after I've gone into the BIOS settings and pressed 'save and reset'. I dont have to change...
Hi!
After successful upgrading the server from the latest version 6.x to version 7.0-10 Cloud-Init stopped working. VMs with Cloud-Init cannot boot anymore.
I tried to setup a new VM following by the instructions on https://pve.proxmox.com/wiki/Cloud-Init_Support but the result the same.
Can...
I have a TrueNAS VM on one of my hosts that I've passed some HDDs through to. After I upgraded to v7 this VM won't boot because it can't find: /dev/disk/by-id/scsi-35000cca260de7ef3. If I look in that directory I see there are no drives with scsi- name so I'm guessing Bullseye or Prox has...
Dear Proxmox Community,
last night I had to migrate a Physical Windows Server 2012 R2 x64 UEFI/GPT Server to Proxmxo VE 7 (for a customer, we already use Proxmox VE Enterprise).
I tried many different things but in the end the virtual Windows did not start.
Here's what I tried
Installed...
Topic title pretty much sums it up
I have two NVMe (wd/hgst sn200) drives in a zfs mirror and the server no longer boots correctly after a pve-efiboot-tool refresh.
If I select either UEFI OS or Linux Boot Manager it just goes back into the uefi setup screen without booting.
However, if I go...
I had to do a reboot of a new proxmox server this morning and got dropped into the emergency shell.
I'm seeing the following.
zfs-import-cache.service - Import ZFS pools by cache file
Loaded: loaded (/lib/systemd/system/zfs-import-cache.service; enabled; vendor pres
Active: failed...
Liebe Proxmox-Community,
seit heute habe ich ein massives Problem mit meinem Proxmox-Server. Als erstes merkte ich, dass die Weboberfläche unter https://server-ip:8006 nicht mehr erreichbar war. Ich konnte ich mich noch per SSH mit meinem Server verbinden. Allerdings musste ich feststellen...
Hi everyone,
I have my PROXMOX server installed on a intel nuc10i5 8gb ram and two ssds
On one Home assistant VM, pihole in a CT and in the second ssd a Ubuntu VM with zoenminder.
I tried to passthrough the GPU but when i restarted proxmox, now it's stuck whitout GUI and terminal.
Here two...
Hello, community!
I am in trouble. And at the mercy of some smart people in this forum.
Here is the situation:
Server was working fine Monday morning. 2h later - everything dead. Connected a monitor to the server and was greeted by the grub rescure prompt.
"Error: attempt to read or write...
Hello,
I've had problems to make an old linux (Ubuntu 6.10, Linux 2.6.17) boot. I p2ved the physical machine (that is on an old HP ML350G5 with a raid array) using CloneZilla. I then tried to restore this machine on a virtual disk. The thing is, with the RAID array, the root filesystem is on...
Hi all,
Is there something I need to do to make this card work with Proxmox? I have just flashed the firmware on the SAS card to the latest (16.00.10). It's running in IT mode. At the moment, I have inserted 8x SATA drives and if I boot into the SAS configuration utility it sees all the drives...
hi everyone, this evening I took off my Proxmox server to install an additional fan. once plugged back it started the boot process as usual and after 1 minute it was off again.
Connected ipmi remote screen and nothing seems strange, it just shuts down suddenly after the line "reading all...
Hello, everyone!
I have recently moved my Proxmox PC from the office where I've made the setup. As a consequence, the network where it was connected is no longer available.
Today I tried to start the PC, without a network cable attached to it; the result - the boot process got stuck somewhere...
last night I have upgraded my standalone Proxmox installation to 6 and rebooting ended up in emergency shell.
I found that what prevent booting is the lvm volume I had in fstab, after commenting it, proxmox booted.
I tried nearly all formats of mount in fstab and non of them worked.
I tried...
I am in desperate need, I have messed up..
I had an issue with a new m.2 SSD not showing up so I decided that updating my bios might be a solution.
However after I updated the bios all the settings changed to default and I had to redo them.
After redoing the settings as I remember them...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.