bonding

We are using 2 bond interfaces for storage (2x10Gb) and a trunk for the VMs (2x10Gb). We want to split the trunk for the VM in VLAN bridges so we can assign them to our VMs. auto lo iface lo inet loopback auto eno1 iface eno1 inet static address XXX.XXX.XXX.XXX/XX gateway...

Greetings fellow Proxmox users and moderators. First I want to thank the Proxmox team and developers for creating an amazing product. I have been a Proxmox user for only about 2 years but a Linux admin for about 15 years. Regrettably I have not created a forum account until now, however I...

I thought I would post this to maybe assist anybody else that has a HP Procurve 2910al-24G network switch and using 'bridge-vlan-aware' parameter in their server interfaces. I have a 3 server cluster consisting of 2x Dell R420 and 1 x R710. I converted them all recently from Proxmox 5.4 to 6.1...

I am new to proxmox as of a few weeks ago, and am trying to replace VMware because I'd rather avoid paying VCenter pricing to save the department money. So all advice is welcome during their trial period. On our servers, we have dual NIC cards, after some time, I was able to get a continuous...

Hello. I'm looking to setup my Proxmox 5.4 cluster with 2 bonded ports for VMs/Management and 2 bonded ports for integrated CEPH storage. In looking over the Network Config docs there is a reference to running the cluster network from the bonded link requiring active-passive mode. Which one...

Hi, I am using Proxmox just for 2 or 3 Month now. I love it, its Open Source and uses ZFS. I've used ESXi for about 7 years before I moved to PVE. Everything was running fine. I wanted to care about networking performance and activate Bonding, wich I used all the time under Vmware. My old...

Hello, trying to setup Vlan on bond. Proxmox V5.3-11 My network setup is: auto lo iface lo inet loopback iface eth1 inet manual iface eth2 inet manual iface eth3 inet manual iface eth4 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 eth3 eth4 bond_miimon 100...

Hey people, I was testing bonding thingies with 4 port dell broadcom 5719 nics. There is something weird when I tried to bond 4 port nics in round robin mode. I want to share. Using 2 nics connected directly port to port with patch cables. 3 different server hardware and these kernels. Debian...

Hi I have a question about bonding and HA. I want to create a HA PVE cluster, but I am confused with the bonding and its mode. See this simplified picture. I have two switches (Mikrotik CRS317, not stackable) and multiple PVE nodes (just one signed). What should I configure to create a HA...

Greeting Got some interesting problem while configuring OVS. but, first, let me describe network 1) Two lan interfaces bonded property on switch 2) Single VLAN # 519 3) Proxmox 5.2, free edition :) Ok first i configure with linux bridges, config is follow auto lo iface lo inet loopback iface...

Hello, I've got a server with 4 network interfaces, bonded together with 802.3ad. To make that setup work, I had to remove the bridge, else every possible configuration I've tried failed. Now, my network configuration looks like this. With this setup, I've reached the internet by updating...

Hi all I have a question about creating a cluster. We use two servers, which have each four 1GB NICs. We work with local storage. The most importent VMs are Actice Directory und fileserver. These VMs are redundant. AD1 is on hypervisor1 and AD2 is on hypervisor2. Now I just wanted to make a...

I've configured my server with a bonded and bridged connection and seem to have gotten in a little over my head. Our networking group's switch configuration may also be involved. I have kernel logs going back to July 16th and since August 14th I keep periodically getting the following error...

So I got a new server for my Docker Plex environment, a beefy dual Xeon Dell Precision. I thought I would run a virtual lab environment on the same hardware so I installed Proxmox but I am struggling coming from more of a vmware background. I really like Plex on Docker for its community and...

I'm new to VM's, bridges and bonding. The network configuration page suggests some settings but leaves many things unclear to me. I want to bond two NICs, a 1G and a 10G, in active-backup mode with the 10G as primary. Then I want to use a bridge so that all my VM's use the 10G and failover to...

Hi, I'm currently setuping a Proxmox LAB at home and I'd like to have some guidances/recommendations. Here is my hardware : 2 HP Proliant Microserver Gen 8 : - 16 GB of RAM - 220 SSD - 2 Gigabit interfaces on each server - MicroSD port for Proxmox installation I would like to have an...

Bonding problems. LACP is selected and rebooted to take effect. WebGUI shows LACP but... cat /proc/net/bonding/bond0 shows "round robin" and I am getting errors on the switch and in Proxmox. I have no idea how to fix this without a reinstall. I have a Cisco Catalyst 3560G, I have the switch set...

Hey everyone, I'm currently building a "proof-of-concept" for work using Proxmox. I have a 4x1Gb LACP config (see below), but I get slow performance from my VMs. I'm using a 400MBps NAS storage that works perfectly when a 10Gb non-vm client is tested. On Proxmox I have 3, Win 2012 r2 VM's with...

Hi, Creating an environment here is the details. HP blade servers 3 node HA cluster SAN iSCSI multipath shared storage 2 10gb NIC making them bond my question is is it enough to create cluster bond (2 10gb NIC) or is there any recommendations to avoid bottleneck/latency issues. Thanks

Hi! I have a small cluster of Proxmox machines, and I am in the process of upgrading them to 5.0 from 4.4. The two that I have converted have this problem of every few reboots, the network simply doesn't work. I can log in via the console and run /etc/init.d/networking restart and that makes...