bonding

Hi! I have a small cluster of Proxmox machines, and I am in the process of upgrading them to 5.0 from 4.4. The two that I have converted have this problem of every few reboots, the network simply doesn't work. I can log in via the console and run /etc/init.d/networking restart and that makes...

I am installing Proxmox on an HP DL360p Gen9 with a 2 port 10G nic that has a trunked LACP config on the switch side and have the below as my /etc/network/interfaces file: auto lo iface lo inet loopback iface eth0 inet manual iface eth1 inet manual auto bond0 iface bond0 inet manual...

Hello, I'm testing Proxmox and bumped into to small problem. I have 3 servers with 4 cards each connected to single switch. I have created bond0 and bond1 interface with 2 interfaces in each bond. Then I have assigned vmbr0 to bond0 and vmbr1 to bond1. Vmbr1 have IP in same network: vmbr0...

This configuration (perhaps you'll call it a work-around) took me a while to sort out, so hopefully it will save you some time. The problem: When you bond 2 interfaces and then want to make a "vmbr" (for example vmbr0) over them, you'll find that the moment a VM starts with the same vlan tag as...