wifi

There are 4 Ethernet port on my PC, port1 is the Proxmox VE console page, port2 idle. port3 and port4 for OPNSense. OPNsense uses port3 LAN, port4 WAN. The LAN is connected to the WiFi router, and all the WiFi devices able to access the internet. The problem is that only Proxmox VE cannot...

Hello, Please I need some help to connect my proxmox machine to my WiFi. This is my /etc/network/interface content: auto lo iface lo inet loopback # Wireless interface allow-hotplug wlo1 iface wlp1s0 inet static address 192.168.1.30/24 #IP of my WiFi card gateway 192.168.1.254...

Hi, When trying to setup a Wireless Bridge towards my VMs i first am trying to setup a Wifi connection. I found this user friendly wireless deamon written by intel iwd, but I can't get it to work. I follow the simple user guide, but get stuck at the point of connection. This are the networks...

Hi, I'm having a problem with Qualcomm Atheros QCA6174 802.11ac (M.2 2230) wireless NIC. I installed proxmox on a protectli device and it works fine except for this wifi card. The adapter doesn't show up in /etc/network/interfaces. I see this adapter only when I run the "lspci" command. What...

Hi experts, I have installed proxmox on my laptop and installed the kde-plasma-desktop environment and plasma-nm. My wifi module (intel 8265) is my primary network device and I have configured my network configuration as Masquerading (Nat) with ip tables as described in...

I just installed an OS on top of PVE (MacOS Big Sur to be precise). I have a Realtek WiFi dongle USB (RTL8188EU). I have configured my /etc/network/interfaces file with wlan interface set to dhcp with wpa-ssid and wpa-key enabled as well as using allow-hotplug. But if I started my VM, booting up...

Sorry for a sadly elementary question, but I'm stuck. I just finished Proxmox installation. The system rebooted. I'm at a text screen that says, I gather that, while the screen seems to be inviting me to log in, it's just kidding - I have to log in from a web browser on another machine. And I...

Hi, I'm Laurent new user of Proxmox in France. i would like to install Proxmox on a small HP Prodesk 600 G1 which includes a Wifi Board, 16Gb RAM and SSD as a home lab. i see during installation process that i can choose either Wifi connection or Ethernet connection. i want to have Wifi...

Tested on a Lenovo Thinkpad P1 gen2 with the Proxmox 7.1-2 iso. An ethernet connection to internet is required during the installation process (because iwd is not installed by default). 1. Plug the ethernet cable 2. Install Proxmox 3. Reboot and login with root 4. Update the Proxmox...

Hi is it possible to enable the wifi card MediaTek MT7921K on proxmox? I have a Minisforum HM90 with Proxmox 7.1-8 on Kernel 5.15.7-1 and i want to use my wifi network adapter which is not installed/listed under network. After i found out which wifi device i have, with: root@pve:~# lspci -nnk |...

so i think this may have been covered once or twice already, ive looked around and nothing ive seen has helped, i have a pc that i want to run proxmox on, it has a wifi adapter and the reason it has that is because the ethernet port is not working. ive been able to set up proxmox untill i get to...

Hi all, I'm trying use my old laptop as a proxmox testing server. I do not want it to be attached to ethernet and i want it to connect to my network via wifi. To configure it i'm connected via ethernet using ssh protocol. I did some research and found this wiki...

Hi. Can you please help to solve this problem. I tried to install proxmox ve on my laptop, no success. works fine only with ethernet cable and default config. can't get wifi working with vmbr0. any ideas why? also wpa_supplicant is super slow. ideally, i want a mobile workstation for proxmox...

Hello, I recently added a Wi-Fi adapter (Asus PCE-AC68) to my system. I first installed the drivers on Windows 10 VM and then added the "PCI Device" from "Hardware" settings. The adapter shows up when I run the lscpci 01:00.0 Network controller: Broadcom Limited BCM4360 802.11ac Wireless...

Hello community, I recently decided to move some "networking services" (dhcp, dns, firewall) from either virtual (within NAS) or physical (ISP box) to a physical "myself managed" box. So after a testing period of pfSense, I've chosen a minipc powerful enough to handle bandwidth (soon connected...

I added non-free to the end of the repository list so i could install my Atheros wifi with apt install firmware-atheros But when I do, it tries to remove proxmox-ve, pve-firmware and pve-kernel-5.4. Output: Reading package lists... Done Building dependency tree Reading state information... Done...

.

Hi, I am very new to proxmox. My PC's Ethernet is broken so i have to use WiFi. i am using a TP-link T2UH. I have installed proxmox. i can see the interface on "ip a". Please give me some light. Edit:- Since there is no internet i cant get "iw" tools as well.

I am virtualization Opnsense on Proxmox by passing through two ethernet ports as bridges to the guest VM. One port is configuered as WAN and the other an LAN. Everything is working as it should be. I have a second broadband connection that I want to incorporate as a failover, but no spare...

This card is transplanted from a desktop running Windows 10, have previously gotten speeds of ~150Mb/s. On Proxmox getting around 6Mb/s. Configured using the wpa_supplicant instructions on the wiki. Any ideas what could be causing this? Happy to post more information, just need to know what's...