space

  1. [SOLVED] how to wipe nvme

    Hi, I have the following 1TB nvme that I have setup as a LVM for the VMs: When I try to wipe the disk I get the following Error: The reason I wish to wipe it because I can see there are quite a few raw disks on this NVME and I want to remove them all to start over: I can't remove the...
  2. [SOLVED] Error writing [path] No space left on device

    Hi, im getting this error when i try to move a MV disk from one path to another. I think this have no sense because i think i have enough free space in my lvm, aprox 380GB in the local volume and 1.5Tb in the local-lvm. Im trying to execute this command. mv...
  3. [SOLVED] Synced datastores between servers discrepancy

    Hello, I have 2 PBS server with 2 datastores each. Every datastore is synced to the other server like so From my understanding, both servers should have the same used space since they both hold the same data ? Right now Server 1 is holding twice the amount of data than Server 2 Server 1...
  4. used space 100% (storage)

    How can this data be interpreted? In the LVM tab, I have information about the use of space in 100%, in the summary I have 1% use. What it comes from ? which value is correct?
  5. [SOLVED] windows 2016 Optimize-Volume ReTrim

    The Proxmox VE 6.3 (Hyper-converged Infrastructure) cluster has a virtual machine running MS Windows 2016. Characteristics of this virtual machine bootdisk: scsi0 ostype: win10 scsi0: rbd:vm-126-disk-0,discard=on,size=256G scsi1: rbd:vm-126-disk-1,discard=on,size=1000G scsihw: virtio-scsi-pci...
  6. Disk Full - Recovering Space on Root (Proxmox 6.2)

    When trying to patch a kernel an error message always comes up saying root partition is out of space. Is there a way to safely recover space by clearing any unneeded files? Up until now I have always deleted the default lvm and extended the root partition but I’m wondering if there is a more...
  7. No space

    Good night, I use the Proxmox VE in a laboratory for studies. I have 2 discs: * 1 SATA 6GBps 7200RPM 1TB HD * 1 6GB SATA 480GB SSD - HD is used only for software and files - The SSD I use only for the VM's systems The HD is 100% busy and that's correct because I have allocated it all to a...
  8. ZFS pool report wrong space usage on disk

    Hello every body! I'm very new to proxmox and facing a strange thing: I built a ZFS RAIDZ1 / RAID5 from 4 4TB drives for a total usable size of theorically 12 TB. Once formatted, there's 10.21 TB Usable for datas: Using Thick Provisionning - no snapshot running I have a VM with a virtual hard...
  9. Increase Windows disk space

    I need to increase the size of the disk at KVM Windows 10 machine. I'm using VirtIO drivers and qcow2 image format. I performed this steps: Shutdown the VM Resize the disk from Proxmox GUI. Restart VM I'm going to Windows Disk Manager and nothing changing. I can not see the unallocated new...
  10. Ceph raw usage grows by itself

    Hi, I have a new cluster of 4 nodes, 3 of them have ceph. root@pve3:~# pveversion -v proxmox-ve: 5.1-25 (running kernel: 4.13.4-1-pve) pve-manager: 5.1-35 (running version: 5.1-35/722cc488) pve-kernel-4.13.4-1-pve: 4.13.4-25 libpve-http-server-perl: 2.0-6 lvm2: 2.02.168-pve6 corosync...
  11. Making the PVE Storage Larger

    I have upgraded from a 1TB drive to a 2TB Drive and I have used CloneZilla to move Proxmox to the new drive and I am trying to Expand it to use the larger storage. I have Partition setup and expanded to 1.8T on the Linux LVM (/dev/sda3) but I when I go into the Proxmox interface and look in df-h...
  12. Raw disk size issue with passtrough usb key

    Hi all, we installed Proxmox 4.4 using ZFS RAID 1 and 2 x 1.5TB HD. Then we created 2 VMs, one of these (201 VM) has a 230GB virtual HD (Virtio) and 2 USB key (passtrough mode) that Proxmox see as unused disk 0 and 1. The 2 pendrive are used from a software, into the 201 VM, to ckeck the...
  13. How to Expand the Volume

    I had a 160 GB Harddrive in my Proxmox Machine and I filled it up. I decided to just Clone the Drive and Put 1TB Drive from one of my Older Server well its in BUT I am not a 24/7 linux user, So how do I expand the Volume for more VM Storage?
  14. Setup space for backups

    Hi! Great work on 4.3! :) Question is how do I setup more space for dump? df -h show only 95G on /dev/dm-0 that is local (pve) The rest of the disks space is not showing at all and I have 6TB in RAID10 local-lvm (pve) has more than enough space but I cannot use it for VZDump Is there a...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!