pfsense

Hi there, I've been trying and researching this now for a good month and finally need some help. So, I've setup proxmox 6.1 and have 5 VM's, this server will be used in a small office environment. I have VM1 pfSense as firewall/gateway (not working) . VM2 Zentyal as Domain Controller (working)...

Currently, I have a PfSense VM running on Proxmox. I can access the internet and Proxmox through the LAN port, however, I can't access the internet from the Proxmox Host, or any VMs or containers. I am unsure if this is a problem with PfSense or Proxmox. I have two virtual switches that...

Hi, I have got 2 IP's from my colocation service provider: 39.xxx.xxx.210/32 and 39.xxx.xxx.211/32. NOTE: the gateway for both IP's are: 39.xxx.xxx.1. I can access proxmox fine with the .210 IP, but the .211 IP configured in pfsense does not work. I tested this at home with a 192.168.192.0/24...

Hello dear Community, I was wondering how do I set up it the Best Way. I have a simple 2 node test Lab. The Problem: I'm running on my first node a pf sense firewall which connects to WAN over vmbr0 and inject its "LAN" to vmbr100 So Basically every VM in vmbr100 is in the "LAN" Now I want to...

Guten Abend! Ich setze gerade einen neuen Proxmox Server auf und versuche, pfSense als Router zu virtualisieren. Leider funktioniert der Internetzugriff der virtualisierten Maschinen nicht, die echten Clients am Switch haben dagegen Zugriff. Bisher waren Proxmox und pfSense getrennte Maschinen...

I'm trying to figure out how I could install a pfSense VM and make it HA. I have a ceph cluster of 4 nodes (but there will be nodes added regularly), so I can give each node a public IP address on one of it's ethernet ports. Creating a bridge and adding that to the pfSense VM will give me a...

Hi all, As of today I'm running some Raspberry Pi's at home providing some services (nextcloud, mailserver etc.) for me and a few friends(we're running a "art/draw club"). Since I was able to get an old workstation from work and I didn't really cared about security back when I was setting the...

Hi This my situation : i have 2 public IP from OVH : 17.128.147.23 and 236.214.200.112 17.128.147.23 is used to manage proxmox server , 236.214.200.112 , as i know , is gateway or some else any way, i create 3 VM : Pfsense , windows server and centos server i configure pfsense as dhcp server to...

Hello, Recently, i migrate my server on proxmox to learn how it works and to see something other than Vmware. However, I've a connectivity problem on my pfsense LAN, OPT... Pfsense being a vm on my server without vlan settings into web interface My lan network can’t get out of pfsense. ping...

I can’t test this right now since everyone came home and they’re all using the internet but I just wanted to get an idea. I have a r720 running proxmox. Proxmox is running a pfsense VM. I have two bridges. Wan and lan. Modem is plugged into port 1. Wan bridge is set to port 1. Well I have...

Hi Everyone, I have a pair of pfSense firewalls running on the same Proxmox 6.0-6 VE node that seem to lose IPv6 multicast packets after a while. pfSense sends packets to ff02::12: that look like this: 06:48:29.896428 IP6 fe80::9c9f:5fff:fee0:8211 > ff02::12: ip-proto-112 36 06:48:30.164147...

Hi, I currently have a supermicro sc933 server with dual xenon x5650 that is used in unraid with 50tb of storage (with about 15tb used).I recently bought a supermicro sc836 with dual e5-2640v2 to do some learning about vms. I was thinking about running my docker container currently on unraid...

Hi All, I am sure I have done something silly but cant seem to fix it. Essentially, I run 1 proxmox hypervisor/host that includes a pfsense vm as the home router. The hypervisor has 2 nics, 1 for the WAN port and and for the local network pfSense has a physical nic dedicated to the WAN WAN >...

Please, please help if you can, I have spent hours and hours on this... watching videos, reading and trying but so far no joy. I have my Proxmox server in my garage, and DSL router in my house. There is a single CAT5 cable connecting the two. I am trying to use a VLAN to route my Internet...

Internet <---> host eno0 <---> vmbr0 <---> pfSense VM <---> vmbr1 <---> VM-A, B, C, ... Hello I am new to proxmox because I always worked with hyper-v but due to several differentials that I saw in proxmox I would like to adopt it. However due to a huge difficulty that I am encountering I...

I am running into performance issues and would like to have better throughput with my PFSense. I run my Proxmox in a colo location for a very decent price. It is a dual 2.6GHz E5-2650 with 40GB of RAM on an Intel S2600GZ motherboard For good security, I have all the traffic go through PFSense...

I am baffled by this one. I run a one machine PVE environment running OVS with everything going through PFSense via two vm bridges. Everything has been working great, but this morning something unusual happened. Network connectivity between my VMs and PVE were down. Connectivity between PFSense...

Hey, I have a PfSense VM running. Can I connect my other vms through a virtual network with PfSense, so that the traffic from all vms runs throught PfSense. Thanks. Paul

Greetings Forum: I'm new to PROXMOX. I have been experimenting with PROXMOX on a Dell R720xd, a H710 HBA flashed to IT mode, an internal PMR79 Dual SD Card module to store the OS, numerous 3TiB SAS drives, and 128GiB of ECC RAM. I run one QNAP NAS box for file storage, a media server (Plex...

Hi dear Proxmox users. I have rented a server at Hetzner and have an idea that it should be used for different applications, including web server, file server, web server and a server that runs Ubuntu. Therefore, I have installed Proxmox, as operating system to control VMs. Initially, my...