passthrough

I am new to Proxmox, have been using it for few weeks. The problem is that the web UI is not reachable, when using command line I see the network interface eno1 has an IP butI can't ping other devices in the network neither I can ping Proxmox machine from other devices. I suspect what heppened...

Hello everyone, I've been fighting this issue for the last day with no success. I've tried all of the methods I found in threads on this forum with no advances. I'm trying to pass an LSI SAS9201-8i card to a FreeNAS VM. I've set the VM to q35 mode, the card to pcie, and tried all combinations...

Recently I installed a QLogic BCM57840 10 Gigabit Network Adapter on my AMD EPYC server and try to pass it through to a VM. Before this, a Intel I350 network card was successfully passed through to this VM. I am trying to replace the old Intel card with this QLogic card. When the system was...

I've looked through a number of posts here on passthrough. Most mention nvidia but a few go through the integrated graphics. Some of the settings I have used caused crashes and non-boots, others have brought up the the brink of success halted by the "code 43" error. I have followed the wiki...

i successfully passed through my AMD Radeon 7700 and it works flawless if its the only pcie device that is passed through, when i reboot the guest after a successfull boot with two pcie devices, the gpu is not initialized and generates code 12 in windows device manager, usb controller on the...

I've looked through a number of posts here on passthrough. Most mention nvidia but a few go through the integrated graphics. Some of the settings I have used caused crashes and non-boots, others have brought up the the brink of success halted by the "code 43" error. I have followed the wiki...

Hello all, I can’t seem to find the answer to this so I will ask here. Does connecting drives via USB (in a multi-drive device) affect the ability to get S.M.A.R.T data from the drives? Does it depend on the device? I want to know if I would be able to attach a non-RAID enclosure and still...

Hey! So I have a MegaRAID controller in my server, and I have several disks attached. All of them configured to its individual RAID0. I used this command: -CfgEachDskRaid0 -aAll After that, I used this link to passthrough my HDD to my Lubuntu kvm. However, I cannot mount the HDD, I get the...

Hello all, I’m new around here and new to Proxmox. Fantastic work by all those involved, keep it up! I have been scouring the Internet and in particular this forum and the Proxmox subreddit, but cannot find a definitive answer on how or if PCIe passthrough works on the HP Gen8 MicroServer. I...

Good morning, I would like to use my Nvidia GTX 1660 GPU on the Windows 10 VM for video editing with Adobe Premiere Pro CC 2020, I managed to integrate the GPU in passthrough and Premiere Pro sees it, makes me select it in the project, only that it tells me that it is not compatible to do...

I am running Proxmox version 6.2-6 on my Intel NUC (https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc8i3beh.html). One of my virtual machines is running home assistant for home automation (https://www.home-assistant.io/). I use a specific usb stick...

Hi there, my hardware is as follows, The system is ASROCK J3455-itx with HD500 as the IGD 8G of RAM, 256G SSD The SSD is ngff to USB3 interface as system drive, so I can passthrough both SATA controllers onboard to my guest systems. After reading numerous articles and tips online, I was...

I just finished install the newly released ProxmoxVE 6.2 due to a inadvertent resize of the / which had led to my computer crumbled down. After a series of settings to enable pci-e passthrough, a few issues appeared as below: pveproxy webUI reports "No IOMMU detected, please activate it.See...

Hello, I'm assessing Proxmox at the moment and trying to passthrough a PCIe USB3 card but it's not working correctly. I have blacklisted the driver and created a modprobe .conf file to tell virtio to grab the card, however the driver is still reported as xhci_hcd I read another post who had...

I am trying to dial PPPoE from a guest VM, but I don't see the concentrator when using the bridged setup?? The only thing that works for me is to passthrough a real NIC to the VM. Doesn't matter which VM OS I use (tried linux, windows, and mikrotik), or virtual NIC type (tried E1000 and Realtek)...

Dear community, i am new to this forum and to Proxmox. I have started to use Proxmox some weeks ago, comming from a simple Raspberry installation for my home automation and some other apps. I have setup a VM for my FHEM home automation with two USB devices (CUL and Homematic HM-CFG-USB). Further...

Hello, So I was testing with disk passthrough with my 60tb raid 5 storage on dell 720 server and turns I can pass through the same disk on multiple vms at the same time! I can do r/w on both vms at the same time. I mean is it normal? I tried searching on google but couldn't find any similar...

Hi everyone, On my home server I'm trying to pass through a SATA HDD to a VM (Debian/Openmediavault) via a cheap 2-port PCIe SATA controller (ASM1062). I followed the PCI passthrough instructions on the wiki (https://pve.proxmox.com/wiki/Pci_passthrough). Now every time I start up the VM with...

Yes I know, another GPU passthrough post...;) Well, hello everyone, first time with proxmox, I'm trying to setup GPU passthrough on an AMD platform and following multiple guides/video/wiki I still cannot manage to make it work... Server detail : AMD Ryzen Threadripper 1920x (AMD-v and AMD-vi...

I have successfully managed to pass through my P4600 IGD to a VM. However I could only get it working up to a machine of pc-i440fx-2.2. The error given with pc-i440fx > 2.2 was that the address 1f.0 was in use by another device and the vfio legacy IGD passthrough requires this address to be...