passthrough

I've successfully recognized my host device in correct /dev path. evtest showed it works. However, I wanna passthrough it to a guest. For general qemu, it will work like this, https://passthroughpo.st/using-evdev-passthrough-seamless-vm-input/ How can I make it using PVE?

Hello, as the title already says, I would like to reinstall my Proxmox environment, as the current one has already been messed up a bit and partly serves as a playground. Among other things, this was there to gain experience with it. Now the question is, how do I best build the construct...

Hey I'm trying to pass the GPU to a vm which I am using for my TV. It works after a complete reboot of the server, but my weekly backup (stop) prevents the GPU from passing through again afterwards. Does anyone has this already running?

EDIT + SOLUTION: if you are having trouble with PCI passthrough on your system and know/believe it should work, be sure to know if you are using GRUB or Systemd-boot first. If you are using UEFI you are probably on Systemd-boot and need to edit /etc/kernel/cmdline and issue pve-efiboot-tool...

Running OpenMediaVault (OMV) through an LXC would be quite useful and it appears there is a desire to do this. Can storage device (eg block storage) be passed through to LXC containers for direct hardware access? Here is a thread expressing such interest...

Liebe Proxmox-Fans, ich habe eine VM für die ich über Hardwarebereich, PCI(e) einen HBA (host bus adapter) von LSI geteilt habe. So konnte ich sauber und vollumfänglich an eine VM 4 Stück HDD teilen. Ich denke das könnte ein "Passthrough" heißen, bin mir aber nicht sicher. Was mich aber unruhig...

大家好，首先，英語不是我的母語，但我會盡力描述我將要做的事情，所以如果有任何不清楚的地方，請告訴我，我會盡力解釋。 我有一台安裝了 PVE 的服務器，它可以識別 ConnectX-3 並且工作正常，但是當我嘗試將它傳遞到我的 TrueNAS VM 時，出現以下錯誤 kvm: -device vfio-pci,host=0000:01:00.0,id=hostpci0,bus=pci.0,addr=0x10: vfio 0000:01:00.0: 未能為中斷 INTX-0 設置 TRIGGER eventfd 信號： VFIO_DEVICE_SET_IRQS 失敗：設備或資源繁忙...

Hello. i have a problems with USB devices in container. All devices works perfectly by passthrough to container. Udev rules are written e.g. /dev/1wire From time to time i must do a manually reconnect of a device. After reconnect the USB device is not responsible in container. Rebooting...

I am doing audio passthrough. 00:1f.3 is the audio device I want to passthrough to my Windows 10 VM. /sys/kernel/iommu_groups/13/devices/0000:00:1f.0 /sys/kernel/iommu_groups/13/devices/0000:00:1f.5 /sys/kernel/iommu_groups/13/devices/0000:00:1f.3...

After spending the last 2 weeks gouging my eyes out trying to make this work, I am finally asking for help. I have a ASRock B560M Pro 4 with a Core i9 10900(non k). The IGP on comet lake barely works on linux requiring the use of this https://patchwork.freedesktop.org/patch/412664/ kernel...

Hi there, new to ProxMox and looking for help on a Passthrough issue with a DAC I am currently assessing whether I can have one server to rule them all. With LXC instances for diverse purposes, including a mediaserver for Roon. The idea was to connect a USB DAC (NAD D3045) directly to the...

I am using Remmina on a Linux laptop to access a remote Windows VM via RDP. Would like to redirect my laptop webcam into the remote windows VM. Is this possible?

Hi, I've been stuck on this for almost an entire day now... The documentation in regards to GVT-g isn't that abundant. I expected to be able to use at least two i915-GVTg_V5_4 vGPUs. Instead, I'm only able to use 1 V5_4 or 2 V5_8. The resulting performance in my two VMs is thus absolutely...

Hello Everyone So I just installed Proxmox on my Proliant dl380e G8 with the following specs: 2x Xeon E5 2420 6 Core 1.9GHz 64 DDR3 RAM I have Proxmox installed on 2 SATA HDDs Raid1 with a SATA Controller. I want to virtualise TrueNAS and passthrough the P420 card. First thing I did was...

Hi guys, I would like to know if it's possible to assign more than one phisycal SSD to VM (Debian in my case) with /dev/disk/by-id/ command. I want to passthrough two SSD disk and create a mdadm Raid 1 beetween them to increase read performance and reliability of VM's data (xfs partition on SSD...

Hi, i've camed in another thread to the Problem, that there is no easy way to bind vfio-pci to a bus device. This is neccessary if you can't do it with vendor:device id, because you have multiple devices and you need them on your host too. For example, if you want to passthrough one of four nic...

My goal: (pass and) let 1 Windows VM and 1 Ubuntu/Debian VM use my hosts Intel Quick Sync Video at the same time for video encoding/decoding/transcoding. I do not need display output for the VM('s), it would be nice but I like having VGA access to the console better. Environment (that matters...

Hello there, I am trying to passthrough my motherboard onboard audio to a Windows 10 guest, but every time it boots it crashes on blue screen; the lspci --nnk output for the audio card I want to passthrough is 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio...

Hi, I just did my first install of PVE on an old PC with one HDD. I understand that's not the recommended config but that's all i have for now. I created a couple VMs fine. Now i have in another multiboot PC a SATA SSD from which i boot Kubuntu. And i would like to take that SSD and install it...

Hi, I've got 3 disks currently passed through to a VM using the instructions here: Passthrough Physical Disk to Virtual Machine (VM) - Proxmox VE I created 1 partition per disk, each formatted as ext4 using fdisk/mkfs.ext4 from within the VM and this has been working fine for a while. I'm now...