passthrough

Hi there, my hardware is as follows, The system is ASROCK J3455-itx with HD500 as the IGD 8G of RAM, 256G SSD The SSD is ngff to USB3 interface as system drive, so I can passthrough both SATA controllers onboard to my guest systems. After reading numerous articles and tips online, I was...

I just finished install the newly released ProxmoxVE 6.2 due to a inadvertent resize of the / which had led to my computer crumbled down. After a series of settings to enable pci-e passthrough, a few issues appeared as below: pveproxy webUI reports "No IOMMU detected, please activate it.See...

Hello, I'm assessing Proxmox at the moment and trying to passthrough a PCIe USB3 card but it's not working correctly. I have blacklisted the driver and created a modprobe .conf file to tell virtio to grab the card, however the driver is still reported as xhci_hcd I read another post who had...

I am trying to dial PPPoE from a guest VM, but I don't see the concentrator when using the bridged setup?? The only thing that works for me is to passthrough a real NIC to the VM. Doesn't matter which VM OS I use (tried linux, windows, and mikrotik), or virtual NIC type (tried E1000 and Realtek)...

Dear community, i am new to this forum and to Proxmox. I have started to use Proxmox some weeks ago, comming from a simple Raspberry installation for my home automation and some other apps. I have setup a VM for my FHEM home automation with two USB devices (CUL and Homematic HM-CFG-USB). Further...

Hello, So I was testing with disk passthrough with my 60tb raid 5 storage on dell 720 server and turns I can pass through the same disk on multiple vms at the same time! I can do r/w on both vms at the same time. I mean is it normal? I tried searching on google but couldn't find any similar...

Hi everyone, On my home server I'm trying to pass through a SATA HDD to a VM (Debian/Openmediavault) via a cheap 2-port PCIe SATA controller (ASM1062). I followed the PCI passthrough instructions on the wiki (https://pve.proxmox.com/wiki/Pci_passthrough). Now every time I start up the VM with...

Yes I know, another GPU passthrough post...;) Well, hello everyone, first time with proxmox, I'm trying to setup GPU passthrough on an AMD platform and following multiple guides/video/wiki I still cannot manage to make it work... Server detail : AMD Ryzen Threadripper 1920x (AMD-v and AMD-vi...

I have successfully managed to pass through my P4600 IGD to a VM. However I could only get it working up to a machine of pc-i440fx-2.2. The error given with pc-i440fx > 2.2 was that the address 1f.0 was in use by another device and the vfio legacy IGD passthrough requires this address to be...

Hi, I'm trying to get PCI-Passthrough, following the guide here: proxmox.com Running Proxmox 6.1-7. Kernal version 5.3.18-2. Running a Ryzen 2600, on an ASRock B450M Pro4. Using a GTX 1070 and GT 710 as GPUs. I have set the required parameter in /etc/default/grub, and added the modules in...

Hi there, I've used Proxmox for years on an old HP DL380 G6 which needs a patch to disable IOMMU RMRR checking and allow unsafe interrupts in order to passthrough GPU's to VM's. This combination has worked all that time with some rewrites of my patch whenever another kernel is used in Proxmox...

Here are some relevant specs for my machine: Motherboard: Gigabyte ga-z170x-ud5 CPU: Intel Core i7-6700K GPU: GTX 980 Ti I've tried following this tutorial EXACTLY but just ended up with a machine giving me error 43...

Hello everyone! I want to output via HDMI a VM that passthrough my igpu. For other machines I succesfully passthrough pice gpu but now that I'm doing it with igpus I just can't do it and I don't know what I'm doing it wrong so this is my last hope :v After follow a lot of guides I can't make...

edit: to put it simple Which one (see title) is better and more stable for a workstation usage (I swithch many VMs)??? Time to change... Currently I'm having my old AMD FX9590 w 990FXA board,obviously no ECC, fine IMMO grouping etc... by the way none of VMs are booting after new year holydays...

Hello, I am willing to use the new pve 6.x but it seems, that my pcie passthrough igpu to windows VM is not working correctly. If you know what might be happening, to solve this, I will switch to proxmox VE 6.x, but until I have the stability to do it, I won't. I have tried all guides I could...

Hey everyone, can someone tell me if this will work how i think: Ryzen 3 3200G for example has integrated graphics (APU), is it possible with proxmox to passthrough the APU to a win10 VM or does grapics passthrough only work with real GPUs? If APU passthrough is possible: Will the APU part of...

I'm attempting to create a Freenas VM by passing through two HBAs. One is a flashed H200 (9211-8i) and one is a used 9200-16e. Only issue is, my boot controller is an identical flashed H200. I followed the guide for PCI-E passthrough here however when I get to the host configuration step, the...

I wrote an article on how to do GPU passthrough on the latest version of Proxmox VE, 6.0. Hopefully someone else will find the information valuable. I'd really appreciate feedback on the content of the article, thanks. :) https://lunar.computer/posts/gpu-passthrough-proxmox-60/

High, I've been going at the machine for almost a week now because i have certain requirments. I need hyperv nested VMS and a graphics card passthrough, I spent more than i should on different gpus trying to make it work. In order to get hyperv working i need the 440fx chipset and that doesn't...

Hello Dear Forum, i am still very new here and have only lurked before, but now i have encountered a problem that i can't seem to solve. I plan to build a server with Proxmox as a main OS and OMV (openmediavault) as a NAS VM. (specs if this is relevant that i want to use: 8GB RAM, 250GB m.2...