passthrough

CPU: i7 7500U iGPU: intel HD 620 PVE: 7.1 guestOS: windows 10 intel gpu driver installed in windows 10, gpu work fine, but cant control display brightness

Hi everyone, proxmox noob here. I have recently started working with proxmox. I have two graphic cards; primary one is [AMD/ATI] Lexa XT [Radeon PRO WX 2100], and secondary one is GP107GL [Quadro P400]. My processor is AMD Ryzen 9. I have installed proxmox on my computer, and I am using the...

I configured GPU passthrough in Proxmox, and a VM to use the PCIe GPU. The VM is set to boot at startup. I don’t want to access the VM remotely, and I was expecting to see the VM’s GPU output directly on the Proxmox monitor. It works but with an annoying workaround. The only way to achieve...

Hi, I'm running a pve 7.1-7 and have a vm which is openmediavault. I want to passthrough a nvme ssd by passing pcie. The ssd can be loaded normally if I do not passthrough it. But if I passthrough it, it can not be loaded by the vm. It can be seen in lspci but not in lsblk. Thank you for your...

Hallo, ich melde mich heute nach langer Zeit wieder und habe festgestellt, das ich das Problem früher hier schon mal beschrieben habe https://forum.proxmox.com/threads/usb-drucker-an-lxc-container-durchreichen.73780/#post-331273 Meine damalige Lösung war, das ich den Drucker an den USB Port...

Hi! I am using Proxmox for some time now, but still a noob trying to learn the basics. But now i am at a point where i can not proceed without help, and it concerns my PCIe NIC: It is an Intel PRO/1000 PT Quad NIC, an ultra common one i guess everyone here should know and should be supported by...

Hi All, Hoping someone can tell me the obvious thing that I'm missing! I'm running dual Chelsio T520-CRs in a Dell R620 with PVE 7.1. I have a pfSense VM on the host and am passing through the T520's. All works fine if I pass through the whole card, but if I pass through an SR-IOV VF...

Heya, I’m trying hard to get my conbee II zigbee stick working on my proxmox host :/ Right now I can’t find the issue with it. The stick itself can’t be the problem because switching the stick to my old server is working just as expected. lsusb just shows me the Dresden electronic conbee...

I want to make a VM on my Proxmox Server (Dell PowerEdge R720) that handles some CUDA computing pools that I participate in, and remote gaming when I am not home. I have managed to get the device passed through with everything working, however I have some problems so far. When using LatencyMon...

Hi, Hardware in question: HP ProLiant DL380p G8, Intel I340-T4 Quad port NIC It's been running perfectly fine for months, until I updated today. I carelessly updated the OS after I added the no-subscription repo (had no idea I missed that at setup, long time ago, so I sort of updated as a...

So I started recently with VE 7.0, created LXC and installed ubuntu + Plex. Idea is to use a USB drive connected to the machine to read media files through to Plex For USB passthrough I followed this guide here Then followed this guide to change cgroup What I cannot figure out, is when I go...

Hy people I ran into a problem. First of all, some information on the side: I know how PCI passthrough works under Proxmox. All parameters and modules that are required on my hardware are set and loaded. The device is already unmounted using a script and a cronjob during the start of Proxmox...

I just tried to update a standalone (non-cluster) Proxmox 6.4 with 2 GPUs (1080 and 2080 SUPER) which are both passed through to different VMs. Maybe worth to mention I also pass through some USB controllers directly to those VMs. The mainboard in use is a X570 AORUS Pro. I blacklist GPU drivers...

Hy Leute Bin auf ein Problem gestoßen. Erstmal gleich ein paar Infos am rande: Ich weiß über die Funktionsweise von PCI Passthrough unter Proxmox bescheid. Alle Parameter und Module die auf meiner Hardware benötigt werden sind gesetzt und eingeladen. Gerät wird anhand eines Skripts und eines...

Here's what I have: Proxmox installed on a very powerful machine (RAM/CPU-wise). I have granted generous amount of CPU + RAM to pfSense guest. Now I have a 10gb uplink 9000 MTU connection for WAN. It's fiber / SFP+. I am doing full PCIe passthrough. (all functions of card selected, PCIe...

I've successfully recognized my host device in correct /dev path. evtest showed it works. However, I wanna passthrough it to a guest. For general qemu, it will work like this, https://passthroughpo.st/using-evdev-passthrough-seamless-vm-input/ How can I make it using PVE?

Hello, as the title already says, I would like to reinstall my Proxmox environment, as the current one has already been messed up a bit and partly serves as a playground. Among other things, this was there to gain experience with it. Now the question is, how do I best build the construct...

Hey I'm trying to pass the GPU to a vm which I am using for my TV. It works after a complete reboot of the server, but my weekly backup (stop) prevents the GPU from passing through again afterwards. Does anyone has this already running?

EDIT + SOLUTION: if you are having trouble with PCI passthrough on your system and know/believe it should work, be sure to know if you are using GRUB or Systemd-boot first. If you are using UEFI you are probably on Systemd-boot and need to edit /etc/kernel/cmdline and issue pve-efiboot-tool...

Running OpenMediaVault (OMV) through an LXC would be quite useful and it appears there is a desire to do this. Can storage device (eg block storage) be passed through to LXC containers for direct hardware access? Here is a thread expressing such interest...