nvme

Hi, I have MicroBlade MBI-6219G-T8HX node I added to this node additional M.2 Drive Samsung 970 EVO NVMe M.2 2TB but I don't see this new Drive, not in fdisk and not in Disks list on Proxmox GUI if I boot from Installation CD, I can see this new drive on installation Drives list any suggestion...

Hello! I have two SSD M.2 ADATA 512GB SX6000 LITE (ASX6000LNP-512GT-C), but only one of them detected in linux. Dmesg log [ 0.720367] nvme nvme0: pci function 0000:01:00.0 [ 0.720415] nvme nvme1: pci function 0000:1f:00.0 [ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn...

Hi. I'm trying to install Proxmox 5.4 on RAIDZ-1 on 3 NVMe drives, but I'm receiving the error "unable to create zfs root pool". NVMe are correctly recognised and I can configure RAIDZ-1 on them: But I'm receiving the following error: Could you help me please?

Hallo zusammen, ich teste gerade eine Konfiguration mit Proxmox VE 5.3-8 und habe ein Problen mit zwei NVME SSDs. Die Grundinstallation hängt an zwei SATA SSD Platten auf denen ich zuerst die virtuellen Maschinen getestet habe. Hierbei gibt es auch keine Probleme - jetzt wollte ich noch zwei...

Ok, I have read probably 30 posts now about Proxmox and NVMe + UEFI, so I do apologize for this post, it is absolutely a duplicate of the many, however, I don't seem to see a clear answer for my setup in any of those posts, and my head is spinning trying to figure this all out, so I figured, I...

It should be possible to set a virtual disk drive to be backed by an SSD/Flash device. Virtio SCSI with SCSI, VirtIO and SATA drives should support this. Virtual box supports this since 2014, when can we expect this to happen in PVE? According to the upstream sources this should be possible...

Hi all, I've got a couple of Proxmox servers (single no HA) with SATA drives and getting a backup is a real pain. It takes 50 minutes or so to get a 60-70GB of backup. I'm planning to migrate a few of these servers into one new much more powerful server with the following drives/setup: 4 x...

Good day all, Hardware Specs: Dell PowerEdge R630, Dual (2) Intel Xeon 8 Core E5-2667 v3 CPUs, 3.2 Ghz, 256 Gigabytes Memory, 2x Intel S3610 SSD fo Proxmox OS (raid 1 over PERC H330 SAS RAID Controller), 4x Intel P4510 series 1 Terabyte U.2 format NVMe SSD (VM storage), front 4 bays configured...

Preface: I have a hybrid Ceph environment using 16 SATA spinners and 2 Intel Optane NVMe PCIe cards (intended for DB and WAL). Because of enumeration issues on reboot, the NVMe cards can flip their /dev/{names}. This will cause a full cluster re balance if the /dev/{names} flip. The...

Hello! I've read a lot of threads about people trying to get full speed from their nvme drives. So i'm wondering how does nvme tuning looks on zfs? I have several PVE appliances with nvme mirrors and now i suspect that they don't reach full speeds.

Running recent & updated proxmox 5.2. It was installed on SATA drive, but now I want to move it to NVMe drives. MB has the support for UEFI boot from NVMe. So I've created a GPT partition on NVMe. 512Mb FAT32 partition with ESP flag, and rest are for linux RAID partition where LVM volume will...

Summary: Use next platform Supermicro A+ Server 2123BT-HNC0R with per node configuration: NVME: 4x 2.5" U.2 Intel Optane 900P 280GB 1x M.2 Samsung SM961 256GB (NVMe) SM961 SAS: 2x 2'5" SSD Samsung PM1633a 7.68TB FC: QLogic QLE8362 (attache to FC switch, for use exported...

After update to Proxmox 5.2 with kernel 4.15.18-1 machine not show NVME disk (partition root) But if boot machine with kernel rescue hay see perfectly disk and partitions Only can see machine in remote console, and very dificulta work with this. Apreciate help or experiences.

I am up in the air on which platform to go with - Dell or Quanta. I have done some limited ZFS installs to date so I know my way around it for the most part, but never anything big. I need at least 16TB of fast space, with room to grow later. So typically my go-to is a Dell R730xd 26x 2.5...

Hi, I am considering adding some NVME devices to a new installation of Proxmox, but cannot really see on the forums which devices are compatible, or even which are incompatible. Does anyone know where I can find a list of compatible and working NVME's? I want to use an NVME as ZFS or even LVM...

Hi Guys, Do I need to install/configure anything special for Proxmox 5.0 to see a PCI NVME disk? I can't see any kernel modules activated for nvme or the actual disk itself. Any hints? root@bruce:~# modinfo nvme modinfo: ERROR: Module nvme not found. root@bruce:~# root@bruce:~# lsmod | grep...

Hello! I'm trying to install Proxmox on Raid-10 of 6 SSDs Pci-ex. Proxmox gui installer can't create pool during installation. If i install proxmox on Data SSD and then create ZFS storage from my nvme ssds - everything work fine. I tried to install Debian Jessie on ZFS Raid-10 root (6 NVME...

Hello, I recently installed Proxmox 4 on a personal device at home to play with some VMs. The device uses a NVMe SSD, Intel 600P Series M.2 to be precise. And it looks like the kernel is losing the device randomly. I manage to gather some logs. The file system becomes read-only with most...

What is the best setup for Windows Server 2012 R2/2016 using NVMe SSD ? Is VIRTIO or SCSI the way to go ? I installed both to test and I cannot tell a difference, So I just want to ask is there any difference ? It also looks like the random (16.0) Read speeds are really slow for both ...

I have a Samsung 950 PRO PCIe NVMe 512gb M.2. I just installed Proxmox to test-out Windows Server 2016 in it. I went with viostor because that's the only driver during the install windows accepted, expect for SATA and IDE but they are too slow. Super fast read speeds!!! 6,550 MB/s. But crazy...