If you are trying out bcache in your VM's and are using LVM storage in Proxmox, you might want to blacklist the bcache module on your host.
I use LVM over iSCSI storage for my virtual machines. I was playing around with bcache in a VM. Worked great, until I destroyed the VM: I couldn't delete...
Hello all,
I've got a VM running on LVM storage. The storage is /dev/vmstorage/vm-102-disk-0. I want to convert this to vmdk for import to an ESXi 7.0U1 host. What/which commands can I use to get this done as fast as possible?
The VM is down, so there is no issue copying storage to vmdk...
Hi all,
I've been trying to figure out how to mount a backup snapshot of a server with multiple LVM drives.
A snapshot currently looks like this:
│ vm/119/2021-05-20T12:41:21Z │ 8.03 TiB │ client.log drive-virtio0.img drive-virtio1.img drive-virtio2.img index.json qemu-server.conf...
Dear All
Today I had some time to study and test LVM on my home server.
I did some changes, but now I cannot revert the server to original setup.
These are the tasks I did:
- I physically added a 250 Gb Sata SSD on /dev/sda device. It was from my RP4 old server, and, to blank it all, I dd'ed it...
New to ProxMox. Added unpartitioned disk to LVM accidentally, had to remove (had not added any data to it) and probably fucked it up. Disk now shows as [Unknown] and I cant figure out how to remove it from the LVM and get it back to working (none of my vms will boot as the lvm-thin they all...
Hi,
I'm trying to understand the following situation:
We created this setup of disks in our Dell R710 Server:
VD 0 = only one SSD 1TB
VD 1 = RAID 10 (4 x SAS 600GB)
VD 2 = RAID 1 (2 x SAS 600GB)
#
When I check proxmox about Disk details it shows me 7 disks instead of 3 virtual disks made...
Hello!
I bought a HP Proliant DL380e G8 server with 2xE5-2450L and 64GB of RAM. I have 4 x WD Red WD40EFAX 4TB HDDs and 2 x ADATA 240GB 2,5" SATA Ultimate SU630 SSDs. The server RAID battery has been refurbished.
Here are the RAID controllers on this machine:
[12:08:36][root@zoltan]:~# lspci...
I used raid0 and cache for lv:Raid0Lv,
LV is not automatically activated when a node is restarted
but I can manually to activate LV
Looks like some LV got activated first?
root@pve:~# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert...
I created a VM and installed Debian with LVM LUKS partition and booted into it with no problems. I then installed Proxmox over this as per wiki and booted into it with no problems BUT I cannot connect to the web interface. Proxmox is working and I can access the console. What am I doing wrong?
Hello,
Today I used CloneZilla to image my original 256GB NVMe disk onto a new 1 TB NVMe disk, with the option to resize the partitions proportionally. It looks like CloneZilla did what it is supposed to, the system boots up and if I go into the Disks view within Proxmox I see it now says...
Hi,
I am planning to set up a new proxmox VE on a stand alone HPE DL380 Gen9 that has a Smart-Array hardware RAID controller for storing the VMs. (no SAN or NAS storage)
I know I could set the controller to HBA mode, but I’d like to use the hardware raid features for easier raid management and...
I've been trying to wrap my head around this issue for awhile now. I have Proxmox hosted on a Dell R720 with various drives put together into virtual drives using Dell's RAID card. Everything works well except for an about 15 minute delay during booting. The console shows: Reading all physical...
Hi,
I'm struggling with multipath and lvm configuration. I know it is not directly related to PBS, but on this there runs PBS 1.0.11 (Enterprise subscription).
I want to use a SAN LUN (Multipath with 2 links) as a physical volume, to run LVM on that and use it as a Datastore for PBS.
Server...
Hello all,
We have a cluster with 3 nodes.
On one node hard disks have been added and configured as LVM.
The idea is to make this LVM also available on the other nodes.
Therefore, the other nodes were added to the LVM in the cluster administration and the checkboxes for "Activate" and...
Hi all,
I've read some information about multipath configuration and LVM over iSCSI in Proxmox VE.
But I have some questions is there possible configuration that can use built-in snapshot feature in HPE MSA fo backup proposes?
The goal would be if VM-storages can be mapped as separate volumes...
Hey all, I played around with proxmox a bit and originally had my 6 disks which range from 1tb to 2tb to 10tb directly connected to the motherboards sata ports, and I was able to create vg's with said disks, in the gui it says " vgcreate sda /dev/sda error: Run `vgcreate --help' for more...
Hallo zusammen,
wir haben ein Cluster mit 3 Nodes.
Auf einem Node wurden Festplatten hinzu gesteckt und als LVM konfiguriert.
Die Idee ist, dieses LVM auch auf den anderen Nodes zur Verfügung zu stellen.
Daher wurden auf der Cluster Verwaltung bei dem LVM die weiteren Knoten hinzugefügt und...
I have a second PVE server that also has PBS (1.0.8) installed. This second server shall backup the VMs/CTs from the first one.
Most of the disk space is in LVM-thin as this will be used for VMs.
Is it possible to use lvm-thin as a datastorage?
I don't know what kind of information would be...
We have a working 4 hosts PVE 6.3-3 cluster installed with ZFS. All those machine are enterprise gear on working condition. With those machine we archive, digitize and produce very large video files to different format. These are often intensive processes that require a lot of resources and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.