hba

hello gentlemen, I have an SR650 V2 server connected via 2x SAS/HBA cables to each node of an IBM FlashSystem 5015. I do all the storage configuration, making the volumes available to the host (SR650), but it is showing duplicate volumes: What configuration should I perform to recognize in...

Hi, I'm running a single Proxmox server. It's a HP 380 Gen 9 with the latest BIOS. Now I got my hands on a NetApp shelf, with HBA and QSFP cables to hook it up. HOWEVER. Whenever I try to boot the server with the HBA installed, it goes no further then "initialising RAMdisk" The Server does go...

Hi all, I'm building my second (mini-ITX) node to replace my old NAS. But having a problem with the Gigabyte B550 Aorus elite ax v2 only recognising five of the ten Sata ports on my HBA, and oddly the onboard Sata is not seeing HDs also with the HBA installed. ELIATER PCIe SATA Card 10 Port...

Hello everyone, I am running Proxmox VE where I virtualized Ubuntu Server LTS 22.04 and TrueNAS Scale as VMs and everything was working fine. Recently, I have decided to add 4 more disks to my pool via HBA which is LSI SAS 9300-8i. After the upgrade, the boot load starts and gets stuck with...

Hi All, I have already resolved my issue but I am just doing this post to show how my mindset at the time steered me down a rabbit hole of brute-force clicking and how a simple command highlighted the problem TLDR; before rage-clicking firmware on your newly installed mystery HBA you got from...

Hello, I have a HP Proliant DL360 Gen9 with a HBA 240 card in HBA mode, with HP Enterprise SSD disks, but i dont get the S.M.A.R.T. options? anybody a idea?

So i have scoured the web for hours looking for my problem and i find things that are close but not clearly the same. Im seasoned in linux but its still a bit foreign to me so please forgive me. Anyway, as the title states, When I install my HBA (LSI 9210-8i with FW P20 IT), I lose integrated...

I have been trying the past week to move most of my VMs over to LXC since they all run Linux anyway. The only thing I'm struggling with is finding a easy solution to pass through my SAS expander or the block devices directly to the container so I can do all the mounting in there. Obviously with...

Hello, I am using Proxmox VE v7.2.3 and I want to passthrough a PCIe RAID Controller Card (LSI MegaRAID SATA-SAS 9260-8i is the card in question, to be exact) with two 12 GB Ironwolf NAS drives. When I tried to passthrough this card to my TrueNAS Core VM, the whole Proxmox froze and went...

My Truenas core vm is crashing when I try to pass my HBA to it. Both Intel Virtualization Technology and VT-d is enabled in the bios. I've gone through all the whole of 10.9: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#qm_pci_passthrough root@BarryProxmox:~# pveversion -v proxmox-ve...

I have a PowerVault MD1200 array that I would like to use with ZFS. Host is a PowerEdge R710. Is PERC H200e (also known as Dell 6Gbps SAS HBA Adapter) suitable for this task?

This has probably been gone over one million times already but time for another round. I did a quick search for the title but didn't find anything that makes much sense for my application in the first 5 threads. I currently have two HP DL380 G7 machines with X5675's 128Gb Ram and consumer drive...

Hello, I’m using proxmox remotely because of my military service. I installed H240 on the server when I went on vacation while serving. It seems working well at first. But it wasn’t. It seems like because bad hard drive. But I can’t plug out that disk while I’m here (the army). H240 (hba...

Hi Ive been trying to install Proxmox on a HP Gen 8 with its 420i in HBA mode and a ZFS Raid 1 Mirror on two 146 SAS Drives. Obviously I cant/wont get it to boot. Ive got a 4Gb SD card installed and trying to move the boot partition to it following various howtos on Proxmox forum and from the...

Hey all, I played around with proxmox a bit and originally had my 6 disks which range from 1tb to 2tb to 10tb directly connected to the motherboards sata ports, and I was able to create vg's with said disks, in the gui it says " vgcreate sda /dev/sda error: Run `vgcreate --help' for more...

Hello, it is possible without RAID Controller in IT Mode several SATA hard drives to a VM like Openmediavault? Would this work with a SATA adapter?

Hello everyone, I've been fighting this issue for the last day with no success. I've tried all of the methods I found in threads on this forum with no advances. I'm trying to pass an LSI SAS9201-8i card to a FreeNAS VM. I've set the VM to q35 mode, the card to pcie, and tried all combinations...

Hello all, I’m new around here and new to Proxmox. Fantastic work by all those involved, keep it up! I have been scouring the Internet and in particular this forum and the Proxmox subreddit, but cannot find a definitive answer on how or if PCIe passthrough works on the HP Gen8 MicroServer. I...

Ich möchte bei meinem System vom Onboard SATA Controller auf zwei H310 im IT-Mode wechseln. Ich habe zwei RAIDZ Pools mit jeweils 4 Platten. Lassen sich die in ZFS Pools befindlichen Platten am OnBoard SATA Controller einfach auf die H310 wechseln? Oder zerstört mir dies die RAIDZ Pools?

have anyone experiences (performance, etc) proxmox with ceph but osd disk, deliver from Direct attached storage via Host-Bus-Adapter thanks.