disk

I'm having really poor performance when copying data from one physical USB-C disk to another physical USB-A disk plugged into the same Proxmox VE-system. The rsync below is only at 0.85kB/s. Filesystems are both ext4 and the disks are created as VM-disks: directories and raw. In the VM doing...

Hello, I have a Proxmox-Server with a much VMs. Now I wanted to switch the VM disk from one VM to antoher VM. I have detached the VM disk. So now I cant attach this disk to any VM. I dont have access to this VM disk but I can see this disk at my Storage. How can I attach this disk again to...

Hello everyone I tested whether I could migrate VMs from PVE 6.4-13 to PVE 7.0-11, using backup and restore, which unfortunately fails. Both PVEs share an equal setup except for their Proxmox version, have an LVM thin pooled storage, were installed from Debian (Buster, Bullseye, respectively)...

Hi, I installed Proxmox 7, and I am trying to create a new ZFS using two 1TB NVME drives via the GUI. However, I get the below error: command '/sbin/zpool create -o 'ashift=12' nvme mirror /dev/disk/by-id/nvme-Sabrent_1765071310FD00048263...

Hello, as the title already says, I would like to reinstall my Proxmox environment, as the current one has already been messed up a bit and partly serves as a playground. Among other things, this was there to gain experience with it. Now the question is, how do I best build the construct...

Hello, I followed this guide to passthrough a disk to a VM more than a year ago and it's been working flawlessly inside that VM since then. Though for some reason I added it as virtio2 and not scsi2 as said in the guide, I can't remember why but I must have read somewhere that is has better...

Hello, I want to install Proxmox to serve as a bare metal hypervisor to amongst other things my already installed TrueNAS. I have created a pool for my datadisks and I have an SSD which is the boot pool for it. Now I have another couple of SSD's that I would like to install Proxmox on as a...

Hi everyone, Does anyone know how to check raid status in proxmox ve 6.2 ? Currently, our server's disk has red light color on one of the hard disk. Also, How to check if there is any error with the hard disk ? Many thanks in advance

Hello, I have a problem to delete my ZFS disk. Initially, it was a ZFS Raidz-1 and I delete the disk in the Storage panel. But now, on the Disks panel there are 3 disks ZFS who still used. I don't understand why and how to delete them. Someone have a solution for me ? Thank you in advance.

Liebe Proxmox-Community, seit heute habe ich ein massives Problem mit meinem Proxmox-Server. Als erstes merkte ich, dass die Weboberfläche unter https://server-ip:8006 nicht mehr erreichbar war. Ich konnte ich mich noch per SSH mit meinem Server verbinden. Allerdings musste ich feststellen...

Hello everyone, I've just set up a new Proxmox VE 6.3 and provided a 37GB disk for the OS, but now noticed that 88% (32,9 GB) of the disk is already used after the first update, according to Disks > LVM in the web application. I expected the system to require much less space. Should I...

I have an Nginx VM that will not start. It was working yesterday. When I try to start it, I receive: VM is locked (rollback) When I unlock the VM with qm unlock 100, and try to start it with qm start 100, I receive the following: kvm: -drive...

Please help me figure out, what's wrong. I have a SSD with 220GB parition (created on this way: "Last sector, +sectors or +size{K,M,G,T,P} (4096-784932712, default 784932712): +220G"), formatted as Linux LVM. I have a volume group, including only this SSD, no more. I have a storage with 220GB...

Recently added an extra NVME drive to the system, using ZFS. After adding it i'm lost as what is happening. ZFS appears to have 'absorbed' it but i cannot partition it. There appears no way to undo it etc. I've definitely done something wrong but cannot progress, any pointers ?

I have exported an iSCSI LUN with multipath to a PBS server in the SAN. How should I initialize this remote disk? It doesn't show up in drive list. # lsscsi [1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 [2:0:0:0] disk QEMU QEMU HARDDISK 2.5+ /dev/sda [3:0:0:0]...

Guten Tag, ich habe einen laufenden Proxmox (Version 5.4) auf dem auch um die 10-15 VMs laufen. Gesamtfestplattenspeicher des Proxmox bewegt sich um die 1.2TB. Davon /data mit 1TB / ca. 100GB ROOT bzw. LOCAL / 8GB SWAP. Nun würde ich den SWAP Speicher gerne noch vergrößern, auf wenigstens...

Hello, After having a power cut, all the data from the LXC & KVM VMs disappeared and I really don't know why, here are some screens: I would like your help, I have too much data, thank you. sorry if I am explaining it badly.

When trying to patch a kernel an error message always comes up saying root partition is out of space. Is there a way to safely recover space by clearing any unneeded files? Up until now I have always deleted the default lvm and extended the root partition but I’m wondering if there is a more...

Hi, I'm new to proxmox. I installed the default regular way. When I logged in to the web gui I see local and local-lvm under the pve node. When I click the "initialize Disk with GPT" option it works for all disk except for the Samsung 970 Evo nvme SSD which fails with exit code 2. I checked...

Hello, I am new user of proxmox after several years with vsphere and I am really happy so far. Congratulations to the whole community who mantains and upgrades this great product. While I am still familiarizing with configurations, I followed this guide to add couple of disks to my linux...