configuration

Hi all, I'm hoping I can get some insightful input from this community. I'm looking at building out a new Proxmox cluster with Ceph as the backend. I'd like to get a couple of answers to see if this makes sense and if not where I should make changes. http://bit.ly/2XvgrXa Its a 2U 4 Node...

Hello, I install proxmox on my server, but I have no vmbr0 (only eth0). Is this normal? I intend to use an ip FO. Sorry for the fault, I'm French. Sincerely, Axel

Hey, all. Just rolled a Proxmox Mail Gateway to replace my Mailborder gateway I've been using (they aren't developing an up-to-date version fast enough before the OS I use for it End of Lifes), and Proxmox gives me about the same functionality with less restrictions for less (FREE in some...

Now that Proxmox appears to be pretty grown-up, what is the state of configuration for the web front end? 1. How would we add or change the URI prefix for the web page? (For example, instead of < https://myproxy.mydomain.tld:8006/ >, we'd have < https://myproxy.mydomain.tld:8006/URI/ > before...

Hi folks, given are 3 nodes: each node 10 GB network each node 8 enterprise spinners 4TB each node 1 enterprise nvme 1TB each node 64 GB RAM each node 4 Core cpu -> 8 threads up to 3.2 GHz pveperf of cpu: CPU BOGOMIPS: 47999.28 REGEX/SECOND: 2721240 each node latest proxmox of course...

Hi everybody, I'm new to this forum and this is my first post. I am stuck in a High Availability cluster setup. I have the following configuration: - two servers - two storage nodes (qnap nas) with iSCSI support. I want to create an ha-setup where: - if one of server fails the vm still runs...

I have installed Proxmox on top of Debian and in the process there was a fair bit of firmware conflicts and issues but I think I eventually got everything into place and proper working order in the end. That would be its own post should it need be to dived into deeper but for now the TLDR of...

.

Hello, up to this point I ran this network configuration on my Proxmox 4.4 node: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.2.2 netmask 255.255.255.0 gateway 192.168.2.1 post-up echo 1 >...

Hello, i've added these settings to CT config: lxc.cgroup.devices.allow: c 10:200 rwm lxc.hook.autodev: sh -c "modprobe tun; cd ${LXC_ROOTFS_MOUNT}/dev; mkdir net; mknod net/tun c 10 200; chmod 0666 net/tun" now when i do pct shutdown <ctid>; pct start <ctid> then tun driver (and openvpn)...

i am trying to create a virtual container on my existing debian installation. while hosted on hetzner i followed their directives, when i chose a bridged mode with the following configuration auto lo iface lo inet loopback iface lo inet6 loopback auto eth0 iface eth0 inet static address...

SOLVED: [appended 'lxc.cgroup.cpuset.cpus = 0,1 appended to /etc/pve/lxc/<CTID>.conf to get rid of the error as below in §1, fyi] Hi, 1§ I am getting the following error inside a ubuntu 16.04 container inside proxmox v4.4: "ufs: temp directory created at "/tmp/ufs" nodejs...

What are all of Proxmox's required directories? I'm looking to be able to put in a fresh install of Proxmox, and have Proxmox running by having all of its required settings, configurations, logons, and certificates stored in the ZFS pool I have "images", "templates", "containers", and...

Hi Proxmox pros...I was hoping some SMEs could give me a hand on some advice on my new Proxmox implementation. I was a former Freenas user, but I felt like it was limiting in key areas that are important to me (i.e. VM hosting and native Plex support). Hardware Dell Precision T7500 CPU: Dual...

Hello everyone, I'm not used to post on the forum so excuse me in advance if I'm not in the good place, and also excuse me for my English (French). OK so, I have issues with mails sent by ha mechanism, I show you : "This is the mail system at host pve1.toto.fr. I'm sorry to have to inform...

Hello, I'm new to Proxmox and i tried to setup my network configuration, but every time i try it, all deviced exclusive the fist one are not active. I guess I have a little mistake at my configuration but I didnt find it. This is my configuration from /etc/network/interfaces: I tried the...

Hi. Is there a solution to use variables in container configuration. I need to start some premount scripts and some post stop scripts. As far as I've understand, up to now the variables in container configs are not implemented. My task is simple: 1- to create some directories and files before...

I am an Newbie to Proxmox so maybe it is for you a very simple question. I have a server and client machines will almost never stop. I had a power failure and lost access to Proxmox clients. It presume some not saved configuration, was the cause. I want to figure out what, and how to solve, I do...