configuration

Hi guys I'm creating this thread to ask you all what are the best configuration i can use to create a Windows 10 VM. I've tested several different configurations, but i want to know what are your opinions. My Proxmox 7 Machine Hardware Cpu: Intel i9900k Board: Asus Prime z390-A Ram: 128GB SSD...

I have a cluster of 6 nodes running ceph on all. When i set up my last node I accidently set a duplicate static address that matched another node. I went in and changed the ip of the node. I fixed it in /hosts and /interfaces. When I run pvesh get cluster/config/nodes I can see all 6 nodes, I...

Hey I think i've outdone myself here. For an encrypted VM which had uncertain memory requirements i chose to work with changing CPU configuration, memory ballooning and hotplug, enabling 1GB pages for the CPU, NUMA Despit multiple reboots in multiple configurations this now fails to recognise...

I was setting up ceph on my dev cluster but I accidently set ceph to use nmbr0 instead of vmbr1. Is their a way I can change that? Is their a way I can confirm that I am using the wrong bridge instead of looking at the ips?

This is my first post on this forum. I have a strange problem with the USB2 device. When it is connected to an ARM Raspberry Pi 4B system it is working without problems. I have a DELL 7010 with an i5-3570S computer, when I'm connecting the device to this computer the DVB-S2 USB tuner is not...

Hi, I put this post because I want to put the Proxmox Mail Gateway server and my mail server in different networks and I don´t know how to configure that. Thank you for your answers, Jon Ander Asua

Hi, I´ve put the next configuration in the Mail Proxy (the attached files / The other sites have the default configuration) and the problem is that the email root@jonander.xyz can´t receive any mail but it can send, the port 25 is open so I think that is a configuration problem in the proxmox...

Hello, Just installed proxmox and I want to start tinkering with it. I wanted to have a log of the mess that I am about to inflict on myself and wanted to install etckeeper. However when I try to do `etckeeper init` as root I get the error: Proxmox is on a RAID-Z1. Initial reaction was to...

I just installed proxmox as dualboot on my computer. I can access the local shell ping the internet and get a supposed adress to connect to on the local network for the GUI. When i try to connect to that webpage however, all my devices return: ERR_NETWORK_UNREACHABLE. Since i want to run the...

I want to include args: -cpu 'host,+kvm_pv_unhalt,+kvm_pv_eoi,kvm=off' and args: -device 'vfio-pci,host=00:02.0,addr=0x18,x-vga=on,x-igd-opregion=on' in /etc/pve/qemu-server/<vmid>.conf How should I arrange it? Many Thanks!!

Just wanted to see if there is a way to brand the quarantine portal for LDAP users depending on the domain.

I have a 3 Node PVE Cluster and a NFS-Server as storage. Every node has 2 nic's one (1GiB) for public net and one (10GiB) for NFS-storage connection. The backup server is connected via public lan (1 GiB). Everything runs smoothly as long as no backup runs. As soon as a backup job starts some...

Hello! I'd like to configure postfiy to send emails from proxmox and i'm looking for some help. I'd like to use posteo as smtp server if it is possible... Here is what i did to make it work: 1. Installed libsasl2-modules apt-get install libsasl2-modules 2. Specified account details: nano...

Good morning, i have problems with my server (CPU i9-9900K 32GB RAM 512GB SSD NVMe (Sabrent) for O.S., 512GB + 512GB SSD Sata (Crucial) (zfspool 1TB for VMs) GTX 1660 GPU (passthrough on VM Windows), only it kept crashing telling me the problem it fits in some sectors of the NVMe disk, but I'm...

hello I have the following error and I can't find any info. someone who can help me? Proxmox VE 6.1-8 ERROR """ The current guest configuration does not support taking new snapshots """

Hi, I am unable to connect my VM to network. I've been following hetzners guides on bridge, but still no ping. This is the guide I have been following. I have also tested the routed option, but still no go. https://community.hetzner.com/tutorials/install-and-configure-proxmox_ve What am I...

Hello, I've been using Proxmox off and on for the past few months to host some of my development VMs. Everything looks good so far. It's mostly got all the bells and whistles in that I've got ECC RAM, IPMI, a Xeon, etc. My VM storage is running off a couple of Samsung 983 DCT with PLP. The...

I have my server died but the SSD is ok. I bought a new HW and want to have the same config as I had before. The HW is slightly different - I tried cloning ssd (a new server has only M2 while the old one had only SATA). It did not really work. What do I need to do to restore all my VMs to a new...

hello, I am using Proxmox VE 6.3-4 and using 2 NIC and 2 IP Public, First IP for access Proxmox (eno1) and second IP for access VM (eno2), i would like to assign / dedicate iP to VM. The configuration I have is that the PVE has the following /etc/network/interfaces: Configuration on Proxmox...

Hello, After changing domain, lost all files in /etc/pve. I tried to purge proxmox, apt autoremove, install, but still nothing. Now when removing or installing, this happens: root@proxmox:~# apt remove proxmox-ve Reading package lists... Done Building dependency tree Reading state...