configuration

1. Setup I use the PROXMOX 6 (proxmox-ve: 6.1-2) I set up a DNS server with dnsmasq dnsmasq is configured to send search-domains The VM is running Arch Linux Within the VM systemd-networkd and systemd-resolved are used I use "cloud-init" 19.3 with netplan 0.98-1 2. Problem There are no...

Hello, I need to connect 2 virtual machines directly through a "virtual network cable" without using a switch. Is this possible in Proxmox? Thanks in advance, C.

I have installed a VM (Ubuntu 18.04) with no firewall installed either with Ubuntu or Proxmox, but port 25 will not connect, I have checked it with a off site utility and by trying to telnet net into it and nmap also show it not listening en04 is configured for connecting through a bridged port...

Hi, I finished upgrade to Proxmox 6 + Ceph Nautilus on 4 node cluster. On 2 nodes I have identified that all directories /var/lib/ceph/osd/ceph-<id>/ are empty after rebooting. Typically the content of this directory is this: root@ld5508:~# ls -l /var/lib/ceph/osd/ceph-70/ insgesamt 60...

Hi, is there a way to change the default way proxmox names the backups ? We have centralized system of backups for 3 differents proxmox and vm ID are not uniques. Thanks in advance, regards,

Hi guys, I am absolutely new to Proxmox and also have never installed/configured a virtualisation server for hosting several VMs. So, I heard and thought, Proxmox seems a good idea for that, especially, as I like Debian a lot. The system will be: Ryzen 7 3700X, 32 GB RAM, Gigabyte Mainboard, 1...

Hi, The title says it all, I've mistakenly rm -R /etc/pve/nodes on a quorated PVE 5.4 2-node cluster. The cluster still runs happily, and pvecm status looks fine and all. But corosync did its job thoroughly removing this directory from the two nodes. I guess the configuration is still in RAM...

Hi all, I'm hoping I can get some insightful input from this community. I'm looking at building out a new Proxmox cluster with Ceph as the backend. I'd like to get a couple of answers to see if this makes sense and if not where I should make changes. http://bit.ly/2XvgrXa Its a 2U 4 Node...

Hello, I install proxmox on my server, but I have no vmbr0 (only eth0). Is this normal? I intend to use an ip FO. Sorry for the fault, I'm French. Sincerely, Axel

Hey, all. Just rolled a Proxmox Mail Gateway to replace my Mailborder gateway I've been using (they aren't developing an up-to-date version fast enough before the OS I use for it End of Lifes), and Proxmox gives me about the same functionality with less restrictions for less (FREE in some...

Now that Proxmox appears to be pretty grown-up, what is the state of configuration for the web front end? 1. How would we add or change the URI prefix for the web page? (For example, instead of < https://myproxy.mydomain.tld:8006/ >, we'd have < https://myproxy.mydomain.tld:8006/URI/ > before...

Hi folks, given are 3 nodes: each node 10 GB network each node 8 enterprise spinners 4TB each node 1 enterprise nvme 1TB each node 64 GB RAM each node 4 Core cpu -> 8 threads up to 3.2 GHz pveperf of cpu: CPU BOGOMIPS: 47999.28 REGEX/SECOND: 2721240 each node latest proxmox of course...

Hi everybody, I'm new to this forum and this is my first post. I am stuck in a High Availability cluster setup. I have the following configuration: - two servers - two storage nodes (qnap nas) with iSCSI support. I want to create an ha-setup where: - if one of server fails the vm still runs...

I have installed Proxmox on top of Debian and in the process there was a fair bit of firmware conflicts and issues but I think I eventually got everything into place and proper working order in the end. That would be its own post should it need be to dived into deeper but for now the TLDR of...

.

Hello, up to this point I ran this network configuration on my Proxmox 4.4 node: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.2.2 netmask 255.255.255.0 gateway 192.168.2.1 post-up echo 1 >...

Hello, i've added these settings to CT config: lxc.cgroup.devices.allow: c 10:200 rwm lxc.hook.autodev: sh -c "modprobe tun; cd ${LXC_ROOTFS_MOUNT}/dev; mkdir net; mknod net/tun c 10 200; chmod 0666 net/tun" now when i do pct shutdown <ctid>; pct start <ctid> then tun driver (and openvpn)...

i am trying to create a virtual container on my existing debian installation. while hosted on hetzner i followed their directives, when i chose a bridged mode with the following configuration auto lo iface lo inet loopback iface lo inet6 loopback auto eth0 iface eth0 inet static address...

SOLVED: [appended 'lxc.cgroup.cpuset.cpus = 0,1 appended to /etc/pve/lxc/<CTID>.conf to get rid of the error as below in §1, fyi] Hi, 1§ I am getting the following error inside a ubuntu 16.04 container inside proxmox v4.4: "ufs: temp directory created at "/tmp/ufs" nodejs...

What are all of Proxmox's required directories? I'm looking to be able to put in a fresh install of Proxmox, and have Proxmox running by having all of its required settings, configurations, logons, and certificates stored in the ZFS pool I have "images", "templates", "containers", and...